• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.4 no.1
• /
• pp.20-27
• /
• 1993

In this paper, a model of TCM / M-PSK with set partitioning and a model of the combined M-ary PSK system with pragmatic coding for digital radio communication are realized. The equations of error probability for TCM / M-PSK system and the combined M-ary PSK system with pragmatic coding are derived on the conditions of the Rayleigh fading with the AWGN. It is found that the combined M-ary PSK systemwith pragmatic coding in the AWGN channel can not be applied to the fading channel since uncoded bits cause parallel:parallel paths in the trellis diagram to degrade the performance of the system. However, the use of pragmatic coding in the AWGN channel could simplify the given system since single convolutional encoder / decoder is required.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.4 no.1
• /
• pp.10-19
• /
• 1993

As a method to measure the absorbing characteristics of microwave absorber, the various microwave measuring method can be used fundamentally. There is, however, a big problem in measuring errors, since the wavelength of microwave such as used for radar is very short. Therefore, this research aimed to design and fabricate a converting adaptor of 20mm .PHI. coaxial tube from a Type - N connector to $20mm\phi$ coaxial tube and to use it for evaluating absorption characteristics of microwave absorber. Furthermore, the measurements of absorbing characteristics and material constants have been performed and reviewed, which were carried out by using the coaxial tube and by using rectangular waveguide, res- pectively. As a result, the validity of the proposed measuring method has been confirmed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.5
• /
• pp.1055-1063
• /
• 2013

CTL cell that is one of the standard electromagnetic generation equipment can measure the characteristic of the electromagnetic susceptibility and the electromagnetic interference. In case of being input the same magnitude signal with the phase difference of 0o or the phase difference of 180o at two input ports of CTL cell to be the fundamental resonant frequency(TE011) of 2.20GHz, the characteristics of the electric field and the magnetic field at the uniform area were measured. And, it measured the electric field characteristic due to the variation of the input power, the test position and the input frequency under the dominant E-field and the dominant H-field of CTL cell. Using these mesuremed data, it examined the operation characteristic and the available frequency band of CTL cell.

• Aerospace Engineering and Technology
• /
• v.9 no.2
• /
• pp.161-167
• /
• 2010

CEU(Camera Electronic Unit) loaded in optical satellite for a high resolution image acquisition is composited with CC(Camera Controlloer), FPA(Focal Plane Assembly) and CEUP(CEU Power supply). EMC test and analysis results are explained in this paper. CE, CS, RE and RS test is performed in the 1st EMC test, RE, RS test which is not complied and influence considerably after shielding structure is performed in the 2nd EMC test. An effect due to the noise of CEU in the GPS/S-band receiving band is analyzed based on 2nd EMC test results. Margin more than 6dB is guaranteed when CEU is shielded.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.10 s.113
• /
• pp.920-928
• /
• 2006

Fiber-reinforced composites transmitting microwaves of certain frequencies or bands were proposed. These frequency selective fabric composites(FSFCs) are fabricated by weaving carbon fibers and dielectric fibers that build periodic patterns. Design parameters affecting the electromagnetic characteristics of FSFCs were widely discussed, Then the electromagnetic characteristics of a fabricated plain-weave FSEC were investigated with regard to the electrical conductivities of carbon roving, the fiber undulation, and the aperture-to-cell ratio, for the electrical conductivities, its dependence on frequency as well as on the fiber volume fraction of carbon roving was taken into account. Constituent material properties and the fiber undulation had little effect on the EM properties of the fabricated FSFC, while the aperture-to-cell ratio made a profound effect on them.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.1
• /
• pp.106-112
• /
• 2013

In this paper, human exposure of wireless devices was analyzed for various positions of the transmitter. The scenario for the position of the transmitting antenna was decided after discussion with ADD(Agency for Defense Development), and Korean male phantom model developed by ETRI were used to conduct simulations. The SAR values were analyzed by changing the position of the transmitter, and compared with Korean EMF regulations and ICNIRP guidelines. Additionally, human exposure was also investigated for two typical postures which can be posed by war-fighter.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.6 no.3
• /
• pp.55-67
• /
• 1995

The error rate equations of MPSK and DS/MPSK radio signals transmitted through the m-distributed fading channel in Gaussian noise and tone interference environments have been derived. Using the derived equations, the error rate performance is evaluated and shown as functions of carrier-to-noise ratio, carrier-to-interference ratio, processing gain, fading index and the number of diversity branches. The derivation has been done for two cases. The first case assumes that only the signal is undergoing the influence of fading, and the second case assumes that both signal and interference are undergoing the influence of fading simultaneously. From the obtained results, we have known that the error performance of MPSK signal is improved by using diversity technique and direct sequence spread spectrum technique even in a fading environment. Also comparing the error rate performance of two cases, the latter is worse than the former.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.10a
• /
• pp.229.1-229
• /
• 2003

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.995-996
• /
• 2010

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.2
• /
• pp.285-292
• /
• 2001

In this paper, the analysis model of a composite electromagnetic interference environment is proposed, and the composite interference consists of three types, i.e., impulse, sinusoidal, and rectangular type. Also, we have derived the p.d.f of the amplitude of the composite interference. And using a derived p.d.f, we have evaluated the performance of 16QAM (Quadrature Amplitude Modulation) system in a composite electromagnetic interference environment. From the results, it is known that when impulse type interference is weaker than the others, the shape of p.d.f is dominantly governed by the power component ratio of sinusoidal and rectangular type interference. On the other hand, when impulse type interference is stronger, the effect of the other two interference becomes insignificant. Also, It is shown that the smaller both impulsive index (A) and the mean power component ratio ($\Gamma$') in impulse type interference are, the worse the performance of 16QAM system is.