• Journal of the East Asian Society of Dietary Life
• /
• v.18 no.5
• /
• pp.812-821
• /
• 2008

The characteristics of cold-pressed sesame oil (CPSO), virgin sesame oil (VSO), commercial heat-press extracted sesame oil (CHPESO) and commercial supercritical fluid extracted sesame oil (CSFESO) were investigated. The total phenolics of CPSO, VSO, CHPESO and CSFESO were 31.27, 68.33, 60.65 and 31.44 mg/100 g, respectively. Their $\gamma$-tocopherol contents were 32.82, 31.66, 29.26 and 26.87 mg/100g, respectively. The sesamol, sesamin, and sesamolin contents of VSO were the highest. The oxidation induction period (4.53 hr) of CPSO was lower than that of VSO, CHPESO and CSFESO (19.90, 16.50, and 12.23 hr, respectively). CPSO was rapidly oxidized during storage at $60^{\circ}C$ in the dark, and its peroxide value (POV) was increased about 14 times. Although there were few differences in electron-donating abilities at low concentrations (below 100 mg%), VSO showed the highest electron-donating abilities at higher concentrations (77.76% at 10,000 mg%). Contents of linolenic acid and oleic acid were $40.35{\sim}43.98$ and $31.59{\sim}33.46\;g$/100 g, respectively. CPSO contained the highest amount of oleic and linoleic acid among the variously extracted sesame oil.

• Archives of design research
• /
• v.18 no.3 s.61
• /
• pp.85-94
• /
• 2005

Most of product designers use 3D CAD system as a inevitable design tool nowadays and many new products are developed through a concurrent engineering process. However, it is very difficult for novice designers to get the sense of reality from modeling objects shown in the computer screens. Such a intangibility problem comes from the lack of haptic interactions and contextual information about the real space because designers tend to do 3D modeling works only in a virtual space of 3D CAD system. To address this problem, this research investigate the possibility of a interactive quantified structure simulation for product design using AR(augmented reality) which can register a 3D CAD modeling object on the real space. We built a quantified structure simulation system based on AR and conducted a series of experiments to measure how accurately human perceive and adjust the size of virtual objects under varied experimental conditions in the AR environment. The experiment participants adjusted a virtual cube to a reference real cube within 1.3% relative error(5.3% relative StDev). The results gave the strong evidence that the participants can perceive the size of a virtual object very accurately. Furthermore, we found that it is easier to perceive the size of a virtual object in the condition of presenting plenty of real reference objects than few reference objects, and using LCD panel than HMD. We tried to apply the simulation system to identify preference characteristics for the appearance design of a home-service robot as a case study which explores the potential application of the system. There were significant variances in participants' preferred characteristics about robot appearance and that was supposed to come from the lack of typicality of robot image. Then, several characteristic groups were segmented by duster analysis. On the other hand, it was interesting finding that participants have significantly different preference characteristics between robot with arm and armless robot and there was a very strong correlation between the height of robot and arm length as a human body.

• Korean Security Journal
• /
• no.27
• /
• pp.129-159
• /
• 2011

Physical security has always been an extremely important facet within the security arena. A comprehensive security plan consists of three components of physical security, personal security and information security. These elements are interrelated and may exist in varying degrees defending on the type of enterprise or facility being protected. The physical security component of a comprehensive security program is usually composed of policies and procedures, personal, barriers, equipment and records. Human beings kept restless struggle to preserve their and tribal lives. However, humans in prehistoric ages did not learn how to build strong house and how to fortify their residence, so they relied on their protection to the nature and use caves as protection and refuge in cold days. Through the history of man, human has been establishing various protection methods to protect himself and his tribe's life and assets. Physical security methods are set in the base of these security methods. Those caves that primitive men resided was rounded with rock wall except entrance, so safety was guaranteed especially by protection for tribes in all directions. The Great Wall of China that is considered as the longest building in the history was built over one hundred years from about B.C. 400 to prevent the invasion of northern tribes, but this wall enhanced its protection function to small invasions only, and Mongolian army captured the most part of China across this wall by about 1200 A.D. European lords in the Middle Ages built a moat by digging around of castle or reinforced around of the castle by making bascule bridge, and provided these protections to the resident and received agricultural products cultivated. Edwin Holmes of USA in 20 centuries started to provide innovative electric alarm service to the development of the security industry in USA. This is the first of today's electrical security system, and with developments, the security system that combined various electrical security system to the relevant facilities takes charging most parts of today's security market. Like above, humankind established various protection methods to keep life in the beginning and its development continues. Today, modern people installed CCTV to the most facilities all over the country to cope with various social pathological phenomenon and to protect life and assets, so daily life of people are protected and observed. Most of these physical security systems are installed to guarantee our safety but we pay all expenses for these also. Therefore, establishing effective physical security system is very important and urgent problem. On this study, it is suggested methods of establishing effective physical security system by using system integration on the principle of security design about effective security system's effective establishing method of physical security system that is increasing rapidly by needs of modern society.

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.4
• /
• pp.83-89
• /
• 2020

For the past few decades, as part of efforts to protect the environment where fossil fuels, which have been a key energy resource for mankind, are becoming increasingly depleted and pollution due to industrial development, ecofriendly secondary batteries, hydrogen generating energy devices, energy storage systems, and many other new energy technologies are being developed. Among them, the lithium-ion battery (LIB) is considered to be a next-generation energy device suitable for application as a large-capacity battery and capable of industrial application due to its high energy density and long lifespan. However, considering the growing battery market such as eco-friendly electric vehicles and drones, it is expected that a large amount of battery waste will spill out from some point due to the end of life. In order to prepare for this situation, development of a process for recovering lithium and various valuable metals from waste batteries is required, and at the same time, a plan to recycle them is socially required. In this study, we introduce a nanoscale pattern transfer printing (NTP) process of Li2CO3, a representative anode material for lithium ion batteries, one of the strategic materials for recycling waste batteries. First, Li2CO3 powder was formed by pressing in a vacuum, and a 3-inch sputter target for very pure Li2CO3 thin film deposition was successfully produced through high-temperature sintering. The target was mounted on a sputtering device, and a well-ordered Li2CO3 line pattern with a width of 250 nm was successfully obtained on the Si substrate using the NTP process. In addition, based on the nTP method, the periodic Li2CO3 line patterns were formed on the surfaces of metal, glass, flexible polymer substrates, and even curved goggles. These results are expected to be applied to the thin films of various functional materials used in battery devices in the future, and is also expected to be particularly helpful in improving the performance of lithium-ion battery devices on various substrates.

• Korean Chemical Engineering Research
• /
• v.60 no.1
• /
• pp.86-92
• /
• 2022

Recently, the bio-healthcare market is enlarging worldwide due to various reasons such as the COVID-19 pandemic. Among them, biometric measurement and analysis technology are expected to bring about future technological innovation and socio-economic ripple effect. Existing systems require a large-capacity battery to drive signal processing, wireless transmission part, and an operating system in the process. However, due to the limitation of the battery capacity, it causes a spatio-temporal limitation on the use of the device. This limitation can act as a cause for the disconnection of data required for the user's health care monitoring, so it is one of the major obstacles of the health care device. In this study, we report the concept of a standalone healthcare monitoring module, which is based on both triboelectric effects and electromagnetic effects, by converting biomechanical energy into suitable electric energy. The proposed system can be operated independently without an external power source. In particular, the wireless foot pressure measurement monitoring system, which is rationally designed triboelectric sensor (TES), can recognize the user's walking habits through foot pressure measurement. By applying the triboelectric effects to the contact-separation behavior that occurs during walking, an effective foot pressure sensor was made, the performance of the sensor was verified through an electrical output signal according to the pressure, and its dynamic behavior is measured through a signal processing circuit using a capacitor. In addition, the biomechanical energy dissipated during walking is harvested as electrical energy by using the electromagnetic induction effect to be used as a power source for wireless transmission and signal processing. Therefore, the proposed system has a great potential to reduce the inconvenience of charging caused by limited battery capacity and to overcome the problem of data disconnection.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.11
• /
• pp.1766-1773
• /
• 2014

The purpose of this research was to scrutinize dieticians' perspective of seafood ingredients prices in school food-service. Suppliers' contract status, seafood ingredient usage and satisfaction, expectations regarding prices of seafood ingredients, and willingness to pay when HACCP is taken into account were studied. Through random sampling, the survey was conducted on 231 dieticians in 11 different educational districts and 12 elementary, six middle, and three high schools. Ultimately, 142 survey responses were taken into account. Data analysis was performed using SPSS v15.0 by descriptive analysis, ${\chi}^2$-test, and t-test. For contracts regarding seafood ingredients, competitive contracts composed 79.7%. Exactly 42.1% responded that contracts were breached, and 60.1% testified that product returns were due to excessive glazing of ingredients. The satisfaction rate of 'hygiene & sanitation of product' was the highest, whereas 'price of product' was the lowest. For 'recontracting intention', 'informal purchasing' showed higher rates compared to 'competitive bidding'. Reflecting upon the six main price factors, 'designation and maintenance of HACCP', 'price of raw seafood ingredients', 'processing costs', 'margin', 'logistic costs', and 'cost of standardizing seafood ingredients', dieticians' perceived 'impact on the anticipated price' on total cost was lower than present counterparts. This implicates that 'impact on the present price' of the six price factors is too excessive, suggesting that many dieticians are unsatisfied with the current prices of seafood ingredients. Furthermore, 52.8% of dieticians stated that the maximum additional payment of HACCP seafood ingredients should be less than 5%. Consequently, this research serves as basic information for reasonable pricing of seafood ingredients and contributes to increased seafood usage by school food-services.

• Journal of Korean Society of Transportation
• /
• v.22 no.3 s.74
• /
• pp.145-157
• /
• 2004

The cycle length design model of the Korean traffic responsive signal control systems is devised to vary a cycle length as a response to changes in traffic demand in real time by utilizing parameters specified by a system operator and such field information as degrees of saturation of through phases. Since no explicit guideline is provided to a system operator, the system tends to include ambiguity in terms of the system optimization. In addition, the cycle lengths produced by the existing model have yet been verified if they are comparable to the ones minimizing delay. This paper presents the studies conducted (1) to find shortcomings embedded in the existing model by comparing the cycle lengths produced by the model against the ones minimizing delay and (2) to propose a new direction to design a cycle length minimizing delay and excluding such operator oriented parameters. It was found from the study that the cycle lengths from the existing model fail to minimize delay and promote intersection operational conditions to be unsatisfied when traffic volume is low, due to the feature of the changed target operational volume-to-capacity ratio embedded in the model. The 64 different neural network based cycle length design models were developed based on simulation data surrogating field data. The CORSIM optimal cycle lengths minimizing delay were found through the COST software developed for the study. COST searches for the CORSIM optimal cycle length minimizing delay with a heuristic searching method, a hybrid genetic algorithm. Among 64 models, the best one producing cycle lengths close enough to the optimal was selected through statistical tests. It was found from the verification test that the best model designs a cycle length as similar pattern to the ones minimizing delay. The cycle lengths from the proposed model are comparable to the ones from TRANSYT-7F.

• Journal of the Korean Professional Engineers Association
• /
• v.29 no.2
• /
• pp.15-23
• /
• 1996

With the ever-increasing importance of high-speed information in society as we move towards the 21 st century, telecommunication laboratories of advanced nations are pressing forward with research and development aimed at implementing its W & P(Visual Intelligent and Personal) services and construction of a new network to support them. In legals to the former, based on a long-term view of technological and market trends, those laboratories are researching and developing services that will make possible an effective progression from the development of services that answer to potential needs towards the full-scale implementation of VI & P services. In regards to the latter, these laboratories are responding in a flexible manner to the increasing diversity and disposal of the communications environment by separating the network into a transmission system and a versatile information control/conversion -ion system and laboratories are working at enhancing the performance of both. Within these board aims, the laboratories are currently focusing our attention in three areas : the technology for a high-speed broadband transmission system featuring optical frequency multiplexing and ATM techniques, network and software technologies for advanced information control and conversion, and technology for constructing a new access network that can provide a comprehensive range of multimedia services. This article describes the laboratories' concept of how VI & P services will develop in the future, and the latest trends in the field of communications. It also describes the ideal configuration of the new network and discusses the important technological aspects of how it is to be constructed. Finally, it presents the results of the laboratories'recent research which include some innovative work, point out the areas requiring future investigation.

• Journal of Korea Technology Innovation Society
• /
• v.21 no.1
• /
• pp.300-330
• /
• 2018

Enterprises' participation in the collaboration research is one of the effective and typical methods through which technologies go into the market or are transferred to other sectors. This study reviews enterprises' participated collaboration research and analyzes their network for disaster and safety management area. From 2005 to 2016, 786 technical papers from four representative journals for disaster and safety management in Korea are compiled based on the authors whose affiliations are from enterprises. During the research period, collaboration research is found to be in an increasing trend in general. However, the number of technical papers with three or less authors is in a decreasing trend, whereas that with four or more authors is in an increasing trend. This fact implies that the range of enterprises' collaboration research is widening. Technical paper productivity and each entity's collaboration network are evaluated using participation-weight based author score. Over the research period, a few universities, which attract most of the enterprises, are found to have higher productivities and centralities. Public enterprises show higher participation weights. Also, sectors such as construction, engineering, and electronics demonstrate higher weights. This study is particularly meaningful because enterprises' participation status in collaboration research for disaster and safety management area is systematically analyzed for the first time in Korea. The network analysis result from this study will be especially helpful in establishing technology transfer strategy.

• Korean journal of communication and information
• /
• v.67
• /
• pp.35-61
• /
• 2014

This article argues that public service broadcasting (PSB) should be transformed into public service media (PSM) in order to accommodate the concept of universal service in this media convergence age. If we utilize the universal service concept of telecommunications in this purpose, it inevitably constrains the concept to "access to general information" and has a limitation in its scope. In contrast, the application of the broadcast perspective leads to only examine the possibility of expanding the universal service obligation to new platforms, which has been applied to terrestrial broadcasting. As a result, these two approaches have no choice but to stay in limited area such as low-income assistance. Thus, in conclusion, it is necessary to convert PSB to the PSM as a means of providing the socially required content universally, which commercial market cannot easily produce.