• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.14 no.6
• /
• pp.452-460
• /
• 2021

As the global electric vehicle (EV) market expands, eco-friendly EV that complement performance and safety problems continue to be released and the market is growing. However, in the case of EVs, the inconvenience of charging, safety problems such as electric shock, and electromagnetic interference (EMI) problems caused by the interlocking of various electronic components are problems that must be solved in EVs. The use of wireless power transmission technology can solve the problem of safety by not dealing with high current and high voltage directly and solving the inconvenience of charging EVs. In this paper, in order to reduce EMI a wireless charging control module, which is a key electronic component of WPT of EV. EMI reduction was designed through simulation of problems such as resonance and impedance that may occur in the power supply and signal distortion between high-speed communication that may occur in the signal part. Therefore, through the EMI reduction design with power integrity and signal integrity, the WPT wireless charging control module for electric vehicles reduces 10 dBu V/m and 15 dBu V/m, respectively, in 800 MHz to 1 GHz bands and 1.5 GHz bnad.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.16 no.2
• /
• pp.104-108
• /
• 2023

Because of recent expansion of the electric car market. it is highly growing that should be supplemented its performance and safely issue. The EMI problem due to the interlocking of electrical components that causes various safety problems such as fire in electric vehicles is emerging every time. We strive to achieve optimal charging efficiency by combining various technologies and reduce radioactive noise among the EMI noise of a weirless charging control module, one of the important parts of an electric vehicle was designed and tested. In order to analyze the EMI problems occurring in the wireless charging control module, the optimized wireless charging control module by applying the optimization design technology by learning the accumulated test data for critical factors by utilizing the Python-based script function in the Ansys simulation tool. It showed an EMI noise improvement effect of 25 dBu V/m compared to the charge control module. These results not only contribute to the development of a more stable and reliable weirless charging function in electric vehicles, but also increase the usability and efficiency of electric vehicles. This allows electric vehicles to be more usable and efficient, making them an environmentally friendly alternative.

• Journal of Korea Port Economic Association
• /
• v.36 no.4
• /
• pp.107-120
• /
• 2020

This study analyzed the competitiveness of major export industries following the FTA between Korea and five Central American countries. Findings revealed that Korea mainly exports industrial products such as ships, automobiles and parts, steel, and electronic devices, and it imports raw materials and agricultural products such as coffee and copper, indicating a complementary trade structure. Similarly, the trade specialization index analysis revealed that Korea specialized in exporting industrial products such as ships, automobiles, steel, and machinery, and in importing primary products such as copper and coffee. Products such as ships, steel, and machinery, which are major export items to Central America, are expected to further strengthen their competitiveness due to tariff cuts. In addition, it is expected that the demand for medicines and medical supplies could increase in future due to the COVID-19 pandemic. This study attempted to present implications for establishing export strategies by analyzing the competitiveness of Korea's major export industries in the Central American market, in accordance with the Korean-Central American FTA. These findings could be used as basic data for future entry into South America as a bridgehead in the Central American market.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.3
• /
• pp.131-137
• /
• 2017

In order to safely protect high over current flowing into the main circuit at short-circuit without any explosion or fire, the enclosed cartridge fuse with a high interrupting capacity should be applied. But this fuse is impossible to be applied to an inner electronic circuit because of a limited space problem result from the miniaturization trend of products. Therefore, it is necessary to apply a sub-miniature fuse with a relatively small size. However the semi-enclosed fuse which is more free for an influx of air than the enclosed cartridge fuse and is possible to protect fuse elements with chemical and physical combination can be adoptable. But it has a limit of implementing the characteristic of a high breaking capacity. For these reasons, the Fe-42wt％Ni fuse elements alloy and fuse-link with less space were designed to increase a breaking capacity of sub-miniature fuse and its safety for fire and explosion was confirmed in this paper.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.303-306
• /
• 2012

According to the rapid development of cell phone and camera industry, all of electronic products obtain small-size, high-performance and variety. Therefore, PCB also obtains high-integration, multi-layers and high-specification rapidly. Among the digital cameras which are continuously evolved and developed, the market of mirror-less camera and hybrid digital camera is continuously increased because of the customer's request for small-size and weight lightening, except for DSLR camera. Therefore, the difficulty of PCB design is gradually increased and design L/T is longer according to the high-specifications, low-current and high-performance components. This thesis suggests the method to reduce L/T for PCB design applied to the reduction of digital camera's developing period and manufacturing period.

• Resources Recycling
• /
• v.16 no.2 s.76
• /
• pp.3-11
• /
• 2007

It is to review the current status of magnesium smelting. Raw materials for magnesium source, worldwide production and producers of metallic magnesium, Korean magnesium markets and some important extraction technologies were reviewed. The magnesium extraction technologies were described according to the two major reduction methods: the fused salt electrolysis and the thermal reduction method. Also, the research on the extraction of magnesium from magnesite which has been being carried out at KIGAM was briefly introduced with discussing the related topics on the recycling of the chlorine and the hydrogen chloride gas used in the process.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.6
• /
• pp.1204-1208
• /
• 2012

According to the rapid development of cell phone and camera industry, all of electronic products obtain small-size, high-performance and variety. Therefore, PCB also obtains high-integration, multi-layers and high-specification rapidly. Among the digital cameras which are continuously evolved and developed, the market of mirror-less camera and hybrid digital camera is continuously increased because of the customer's request for small-size and weight lightening, except for DSLR camera. Therefore, the difficulty of PCB design is gradually increased and design L/T is longer according to the high-specifications, low-current and high-performance components. This thesis suggests the method to reduce L/T for PCB design applied to the reduction of digital camera's developing period and manufacturing period.

• Korea Trade Review
• /
• v.42 no.1
• /
• pp.1-25
• /
• 2017

By applying the AHP(Analytic Hierarchy Process), we have analyzed the importance and the order for priorities to the management risk factors of Korean SMEs & Venture companies in China. The major management risk factors of manufacturing companies were the rise in labor costs followed by fierce competition in the marketplace, problems involved with human resource management and the rise in the cost of materials. In the case of companies manufacturing electronic products, the rise of labor costs and alteration in government's tax policy were seen as the main risk factors. In the case of chemical product manufacturing companies, the reinforcement of environmental protection law and in automobile component manufacturing companies, apart from the rise in labor cost, the increase in raw materials costs were analyzed as the main risk factors. While considering the time period, the main risk factors of the companies that entered China in the 1990's were fierce competition and alteration in government's tax policy and for the companies that entered China in the 2000's, increase in raw material cost, the rise in labor cost etc were analyzed to be the main risk management factors.

• International Area Studies Review
• /
• v.21 no.4
• /
• pp.101-124
• /
• 2017

This study is to examine the current situation of the AEC (ASEAN Economic Community) and analyze macroeconomic situation of Vietnam since the launch of AEC. According to recent trade indicators, Vietnam is expected to be more productive in the manufacturing and processing sectors because it is at the heart of the global value chains (GVCs) in electronics, telephones, and textiles and shoes industry. Vietnam has signed or is negotiating free trade agreements with various countries around the world including Korea, Israel, EU and RCEP and so on. Therefore, it is expected that Vietnam's trade dependency and FDI inflows to Vietnam increase more and more. However, the fact that the proportion of exports by foreign-invested companies accounts for about 70% of the total exports implies the uncertainty of Vietnam's economy in the future. Attracting FDI investment can further reduce the competitiveness of domestic companies in Vietnam. Therefore, in order for Vietnam to maintain sustainable development in the future, it is necessary to reform the momentum of foreign-invested enterprises to the development of Vietnamese companies.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.12
• /
• pp.76-81
• /
• 2016

The Internet of Things (IoT) interconnects every device by allowing them to communicate directly and share information with each other and has been recently applied to various industrial fields. The integration of home appliances with IoT has led to the creation of new markets by providing quick and better experience to consumers. Although IoT has been integrated into most modern day appliances, there have been few developments for kitchen appliances. This paper presents the development of integrating IoT with the blender, one of the most widely used appliance in the kitchen. A custom application was made to interact with the blender that provides three main functions: digital controller, maintenance, and defrosting alarm. The function of digital controller provides wireless control to the conventional blender. The maintenance function detects and alerts the user on blender reliability with the intent of enabling the anticipation of hardware failures. The defrost alarm alerts the user when the ingredient has reached the appropriate and desired temperature when cooking frozen food.