• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.3
• /
• pp.48-58
• /
• 1999

In this paper, a new parallel computation method, which fully utilize the parallel processors both in mesh generation and FEM calculation for 2D/3D process simulation, is presented. High performance parallel FEM and parallel linear algebra solving technique was showed that excessive computational requirement of memory size and CPU time for the three-dimensional simulation could be treated successively. Our parallelized numerical solver successfully interpreted the transient enhanced diffusion (TED) phenomena of dopant diffusion and irregular shape of R-LOCOS within 15 minutes. Monte Carlo technique requires excessive computational requirement of CPU time. Therefore high performance parallel solving technique were employed to our cascade sputter simulation. The simulation results of Our sputter simulator allowed the calculation time of 520 sec and speedup of 25 using 30 processors. We found the optimized number of ion injection of our MC sputter simulation is 30,000.

• Journal of the Korean Magnetics Society
• /
• v.22 no.3
• /
• pp.97-102
• /
• 2012

In this paper, a non-contact power transferring has been performed. Power Transferring by using an electromagnetic inductive coupling is more suitable for high power transmission than by using a magnetic resonance method. Power transferring system has been designed with Loading Distribution Method to divide the electric and magnetic loading for designing the magnetic core and electric coil. To design optimum shapes of magnetic yoke, 3D finite element analysis has been performed. Experimental results show good agreement with numerical ones. So, it could be adopted in the electric power transferring system for a short-distance wireless electric power transferring machine.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.127-128
• /
• 2015

전력사용 증가에 따른 전력망의 확대에 따라 발생할 수 있는 사고와 안전성의 문제도 지속적으로 제기되고 있다. 그 중 화재사고의 발생원인 중 하나인 스파크에 관한 많은 실험적 연구가 존재하나, 수치해석 모델링을 통한 연구는 부족하다. 이 논문에서는 직류회로의 도선이 절단되는 순간 발생하는 스파크 현상을 다루기 위해, 등가회로의 개념을 적용하여 열과 전계 세기를 결합 해석하는 다중물리 해석 기법을 제시한다. 유한요소법을 이용한 수치해석 프로그램을 통하여 데이터를 도출한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.3
• /
• pp.432-437
• /
• 2016

The behavior of a bellows for an electromagnetic control valve was investigated. The bellows consists of an outer metal bellows, inner spring, and metal caps. The bellows needs to have sensitive and precise motion against external loads and pressure loads in order to control the position of the valve accurately. The spring constant of the inner spring and load-displacement curve of the bellows set were measured using a test machine. The inner spring showed a linear relation between load and displacement. The bellows set showed small stiffness at small displacement, and then the stiffness slightly increased upon subsequent displacement. Based on the measured data, finite element analysis was performed. Axisymmetric conditions were applied, and shell elements were used. The effective material properties of the outer bellows material were extracted. Additional analysis was performed, and the behavior of the bellows was analyzed using the finite element model.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1109-1110
• /
• 2011

본 논문에서는 선간단락 시 단락전류에 의한 전력용 변압기의 단락특성을 해석하였다. 변압기 사양은 1[MVA], 6,600/660[V] 단상 내철형 배전용 변압기를 사용하였으며, 변압기에 유입되는 단락전류를 회로방정식을 이용해 계산하였다. 단락전류에 의해 발생되는 누설자속 밀도는 유한요소법을 이용해 계산하였고, 계산된 단락전류와 누설자속 밀도에 의해 권선에서 발생하는 축 방향과 반경방향 단락전자력을 계산하였다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.5
• /
• pp.485-492
• /
• 2001

In this paper, electro-magnetic numerical analysis of MFL(magnetic flux leakage) method is presented. For the electromagnetic numerical analysis, 2-D FEM(finite element method) is used. The magnetic vector potential is used as a variable. The analysis of the magnetic field considering the magnetic nonlinearity is performed for the effect of the magnetic salutation. For the verification of the validity of the numerical simulation results, by using the lab-made experimental setup, non-destructive inspection is performed. The SM 45C carbon steel is used as a specimen and the artificial defects are made on the specimen. The non-destructive testing for the detection of the defect is performed. The results according to the variation oi the defect depth and the defect shape are obtained. The experimental results are compared to the numerical ones, and we conclude that the numerical results are similar to the experimental ones. So the possibility of simulation of the MFL by using the numerical analysis is shown in this paper.

• The Journal of the Acoustical Society of Korea
• /
• v.26 no.2
• /
• pp.80-86
• /
• 2007

We have investigated on the development of 2-2 type piezocomposites that have better piezoelectric activity and lower acoustic impedance than those of conventional piezoceramics. In this study, we have investigated the piezoelectric and acoustic properties of 2-2 type piezocomposites sensor which was fabricated using dice-and-fill technique for the different volume fraction of PZT. The specific acoustic impedance of 2-2 type piezocomposites decreased linearly when PZT volume fraction was decreased. The resonance characteristics measured by an impedance analyzer(HP4194A) were similar to the analysis of finite element method (FEM). The resonance characteristics and the electromechanical coupling factor were the best when the volume fraction PZT was 0.6. It also showed the highest result from the standpoint of sensitivity, bandwidth and ring-down property and so on at the same condition. The specific characteristics show that the 2-2 type piezocomposites turned out to be superior to the ultrasonic sensor composed by single phase PZT.

• Aerospace Engineering and Technology
• /
• v.4 no.2
• /
• pp.203-208
• /
• 2005

Electronic components for space launch vehicles are exposed to a severe vibrational environment at launch and flight. The structural reliability of each component can be verified using mathematical approaches. In order to verify the structural reliability, an important parameter is the natural frequency of PCB(Printed Circuit Board) assembly mounted electronic components on and housing mounted PCB assembly in. In this paper, in order to find natural frequencies of PCB assemblies and the housing of hydrazine TCU(Thruster Control Unit), FEM(Finite Element Method) is adapted. The analytical result of FEM is verified by experimental method.

• Journal of the korean Society of Automotive Engineers
• /
• v.9 no.1
• /
• pp.23-32
• /
• 1987

기계,구조물의 신뢰성을 향상시키는 입장에서, 최근에 특히 진동문제가 크로즈업되고 있다. 이것 은 기계, 구조물이 고속화, 대형화, 대용량화함에 따라 종래의 기술만으로는 통용이 되지않기 때 문이라고 생각한다. 이러한 이유로 기계, 구조물의 동력학적 검토를 위해 수치해석기술과 실험해 석기술이 근년에 대단히 비약적으로 발전하고 있다. 이러한 해석기술의 진보를 뒷받침하는 것은 근년의 계산기 및 그 이용기술이다. 즉, 수치해석분야에서 Cray RAN을 시초로 하는 각종전자계 측기기, 고성능미니컴퓨터와 시계열통계해석기술 및 모우도 해석기술이다. 특히 모우드해석에 관 해서는 근년의 진보가 현저하고, 종래의 간단한 가진실험 데이터로부터의 모우도, 파라미터(고유 치, 고유감쇠비, 고유모우드)의 추출에 그치지 않고, 진동응답예측(simulation)과 유한요소법과의 결합이라고 하는 광범위한 기술내용의 포함하는 중요한 기술이 되고 있다. 여기에서는, 이 모우 드해석 특히 실험적 모우드해석기술을 기계구조물에 어떻게 응용할것인가에 대해서 설명한다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.5
• /
• pp.475-482
• /
• 2014

The precision hydraulic valve is widely used in various industrial field like aircraft, automobile, and general machinery. Servo actuator is the most important device for driving the precise hydraulic valve. The reliable operation of servo actuator effects on the overall hydraulic system. The performance of servo actuator relies on frequency response and step response according to arbitrary input signal. In this paper, we performed the analysis for the components of servo actuator to satisfy the reliable operation and response characteristics through the reliability analysis, and also induced the design parameters to realize the reliable operation and fast response characteristics of servo actuator for hydraulic valve operation through the empirical knowledge of experts and electromagnetic theories. We suggested the design equations to determine the values of design parameters of servo actuator as like bobbin size, length of yoke and plunger and turn number of coil, and verified the achieved design values through FEM analysis and performance tests using some prototypes of servo actuators adapted in hydraulic valve.