• Title/Summary/Keyword: 전압상승

Search Result 508, Processing Time 0.028 seconds

PWM Method of H-Bridge Multi-Level Converter for DC Link Voltage Variation Suppression (직류 전압 변동 억제를 위한 H-브릿지 멀티레벨 컨버터의 전압변조 방법)

  • Park, Young-Min;Park, Young-Ho;Kim, Beung-jin
    • Proceedings of the KIPE Conference
    • /
    • 2019.07a
    • /
    • pp.293-294
    • /
    • 2019
  • 본 논문은 입출력 전력품질이 우수하고 전압별 시리즈화가 용이한 고전압 대용량 전동기 구동용 H-브릿지 멀티레벨 컨버터의 직류 전압 변동 억제를 위한 전압변조 방법에 관하여 기술하였다. H-브릿지 멀티레벨 컨버터의 Phase-shifted PWM에 의해서 전동기 무부하 구동 조건에서 유효전력이 Negative로 전이해서 전력이 전동기에서 컨버터로 유입되어 특정 파워 셀 직류 전압이 상승하는 현상이 발생한다. 따라서, 개발 파워 셀 위상 전이량을 일정 주기마다 변경하여 회생된 에너지를 H-브릿지 멀티레벨 컨버터의 모든 파워 셀에 분산시켜 파워 셀 직류 전압 상승을 억제하였다. 제안된 방법의 타당성과 실용성은 실용량 제품의 현장 적용 시험을 통하여 입증하였다.

  • PDF

A study on the voltage rise of the inverter output terminal according to the low voltage Grid connection of solar power generation (태양광발전 저압연계시 인버터 출력단 전압상승에 대한 연구)

  • Cho, Kang-yeon;Eo, Ik-soo
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.21 no.11
    • /
    • pp.746-752
    • /
    • 2020
  • As environmental issues have been taken seriously, the number of solar power generation facilities has rapidly increased in Korea. The voltage at the output stage of an inverter increases in a system that connects a small-capacity photovoltaic power generation to low-voltage power distribution. This degrades the quality of the low-voltage distribution system and adversely affects the load facility. In this study, a solution was obtained to increase the voltage at the output stage of the solar inverter according to the connection of the low-voltage distribution system. The voltage can be controlled by using reactive power factor control inverters. If the secondary tap is adjusted, the voltage can be adjusted to about 15 V, but there is a problem in that the tap is not adjusted unless the KEPCO distribution regulation voltage is out of the range of 220±13V. If the number of inverters is limited, the inverter can be started within the inverter overvoltage range. If it is connected to three phases, the voltage is distributed. The results indicated that power factor control and active voltage control inverters were easy to apply in the field.

전기설비의 검사, 점검 및 시험⑦

  • Gwon, Sun-Gu;Kim, Gi-Uk;Lee, Gyu-Bok
    • Electric Engineers Magazine
    • /
    • v.256 no.12
    • /
    • pp.37-44
    • /
    • 2003
  • 고압계통의 사고나 발전설비의 자동전압조정기의고장 등에 의하여 전압이 기준치보다 상승, 강하하였을 때 그 변동치를 검출하여 이상전압에서 전기설비를 보호하기 위하여 과전압 및 부족전압계 전기가 비상전원장치의 시동신호용으로서 부족전압계전기로 사용되고 있다.

  • PDF

A Study on the Analysis of Transient Overvoltages and Harmonics due to Utility STATCON Switching (전력회사의 스타콘 투입시 과도 전압 상승과 고조파 분석에 관한 연구)

  • 김경철;서범관;송영주;이일무
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.17 no.5
    • /
    • pp.51-59
    • /
    • 2003
  • The utility and many customers employ capacitor banks(STATCON so called at the utility) to help control the power factor(customers) or voltage(the utility) by supplying reactive power to inductive loads. This paper presents analysis of transient overvoltages and harmonics due to utility STATCON switching. One simple and inexpensive means of limiting the voltage magnification transient and reducing harmonics is to switch the capacitor banks on a few minutes after the STATCON has been switched. Simulation results used the EDSA software package show the effects of decreased the transient voltage and harmonic reduction at the customer. And also harmonic limits based on the well-known international harmonic standards IEEE 519 and IEC 1000 are evaluated for the customer.

The Influence of Current Limit Reactor installed in 345kV power systems on Transient Recovery Voltage (345kV 포스코파워~서인천S/S간 한류리액터 설치에 따른 차단기 과도회복전압 검토)

  • Ryu, Hee-Young;Hur, Youn;Park, Soon-Kyu
    • Proceedings of the KIEE Conference
    • /
    • 2011.07a
    • /
    • pp.222-223
    • /
    • 2011
  • 본 논문은 인천지역 345kV 계통고장전류 저감을 위한 한류리액터 설치에 따른 362kV 50kA 차단기의 과도회복 전압 정격 초과 여부를 EMTP을 활용하여 검토하였다. 과도회복전압(TRV : Transient Recovery Voltage)은 크게 두가지, 최대전압(Vp)과 초기과도회복전압상승율(RRRV:Rate of Rise of Recovery Voltage)로 구분하며, 리액턴스 성분이 증가하며 RRRV가 상승하여 차단기가 고장전류을 차단시 절연파괴(열파괴)로 이어질 수 있다. IEC 62271-100 규정에는 RRRV를 정격차단전류의 100% 크기(T100%) 차단시 2kV/us이내로 규정하고 있으며 이 보다 작은 전류의 T90, T75 차단시의 규정치는 계산식에 의해 정해진다.

  • PDF

Study on the Safety of the Grounding Rods in the Distribution System (IEEE Std 80에 따른 배전용 접지동봉의 안전성 검토)

  • Kang, Moon-Ho;Lee, Heung-Ho
    • Proceedings of the KIEE Conference
    • /
    • 2006.07a
    • /
    • pp.470-471
    • /
    • 2006
  • 다중 접지 배전계통에서 발생하는 이상전압으로부터 전력설비의 안정적인 운영과 인체안전을 위해 주로 봉상 접지전극을 이용하여 대지방전경로를 구성하고 있다. 그리고 접지종류별로 접지 저항값을 규정하고 이를 시공에 적용하고 있다. 지락고장이 발생하면 접지전극으로 유입되는 고장전류에 비례하여 대지전위가 상승하기 때문에 이에 대한 인체 안전성측정 및 검토가 필요하다. 따라서 본 논문에서는 IEEE Std 80에서 제시하는 안전성 기준에 기초하여 다중 접지 배전계통에서 접지전극으로 널리 사용되는 봉상 접지전극을 대상으로 상용주파전류를 인가하여 대지전위상승에 따른 접촉전압을 측정하였으며, CDEGS 프로그램을 이용하여 보폭전압을 모의하였다. 또한 이 값을 IEEE Std 80에서 제시하는 최대 허용 보폭전압과 접촉전압과 비교하여 인체 안전성을 검토하였다.

  • PDF

A Study of Hybrid Solid State Transformer Circuit (하이브리드 반도체 변압기용 회로 구현에 관한 연구)

  • Yoon, Dongkwan;Cho, Younghoon
    • Proceedings of the KIPE Conference
    • /
    • 2018.07a
    • /
    • pp.484-485
    • /
    • 2018
  • 증가하는 부하 수요와 신재생 에너지의 보급 때문에 고품질의 전압을 공급하는데 어려움을 겪고 있다. 전통적인 배전용 변압기는 수동적으로 운전상태가 결정되기 때문에 전력 품질에 문제가 발생 시 대처가 불가능하다. 이러한 단점을 보완하기 위해 국내 / 국외에서 반도체 변압기에 대한 많은 연구들이 진행되었다. 하지만 이러한 반도체 변압기는 상용화에 있어 배전단 1차 측의 높은 전압에 대응하기 위한 절연 구조가 필요한 단점이 있다. 본 논문은 기존의 주상변압기에 전력변환장치를 추가하여 반도체 변압기의 핵심 기능 중 순간 전압 상승/강하 보상하는 새로운 개념의 반도체 변압기의 회로 구조를 제시한다. 그리고 1차측 전압 상승/강하에 따른 2차측 전압의 변동을 PSIM 시뮬레이션으로 통해 검증한다.

  • PDF

Measurements of Fast Transient Voltages due to Human Electrostatic Discharges (인체에 대전된 정전기 방전에 의해 발생한 급속과도전압의 측정)

  • 이복희;이동문;강성만;엄주홍;이태룡;이승칠
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.16 no.4
    • /
    • pp.108-116
    • /
    • 2002
  • This paper presents the measurements and evaluation of voltage waveforms due to human electrostatic discharge(ESD). The principle of operation and design rule of a new device for measuring the ESD fast transient voltages with very fast rise time were described. Peak values and rise time of ESD voltages derived from a charged human body under a variety of experimental conditions were examined. The frequency bandwidth of the proposed voltage measuring system ranges from DC to 400[㎒]. The ESD voltage waveform is nearly equal to the ESD current waveform and the peak amplitude of ESD current waveform is roughly proportional to the ESD voltage in each experimental conditions. A rapid approach results in a discharge voltage with a faster initial rise time than for a slow approach. The voltages caused by direct finger ESDs have an initial slope with a relatively long, 10∼30[ns] rise time, but the amplitude is small. On the other hand, the voltages caused by direct hand/metal ESDs have a steep initial s1ope with 1 ∼3[ns] rise time, but an initial spike is very big. As a consequence, it was found that the ESD voltage and current waveforms strongly depend on the approach speed and material of intruder. These measurement results would be useful to design the ESD protective devices.

A low noise PLL with frequency voltage converter and loop filter voltage detector (주파수 전압 변환기와 루프 필터 전압 변환기를 이용한 저잡음 위상고정루프)

  • Choi, Hyek-Hwan
    • The Journal of Korea Institute of Information, Electronics, and Communication Technology
    • /
    • v.14 no.1
    • /
    • pp.37-42
    • /
    • 2021
  • This paper presents a jitter and phase noise characteristic improved phase-locked loop (PLL) with loop filter voltage detector(LFVD) and frequency voltage converter(FVC). Loop filter output voltage variation is determined through a circuit made of resistor and capacitor. The output signal of a small RC time constant circuit is almost the same as to loop filter output voltage. The output signal of a large RC time constant circuit is the average value of loop filter output voltage and becomes a reference voltage to the added LFVD. The LFVD output controls the current magnitude of sub-charge pump. When the loop filter output voltage increases, LFVD decreases the loop filter output voltage. When the loop filter output voltage decreases, LFVD increases the loop filter output voltage. In addition, FVC also improves the phase noise characteristic by reducing the loop filter output voltage variation. The proposed PLL with LFVD and FVC is designed in a 0.18um CMOS process with 1.8V power voltage. Simulation results show 0.854ps jitter and 30㎲ locking time.

Analysis of Motor Winding impact by inverter Switching Voltage Waveforms (인버터 스위칭전압 파형에 의한 전동기 권선 영향 해석)

  • 김종겸
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.13 no.1
    • /
    • pp.94-101
    • /
    • 1999
  • In this paper the problems associated with the switching surge of PWM inverter devices were analysed. As the application of ASD for efficient speed control of AC rmtors is increased, so is the rrntor and ASD-related failure increased. In the industrial rmtor awlications, the introduction of PWM drives can sometmes cause insulation breakdown between the phase windings due to high transient voltage peak. The motor cable length combined with the high switching frequency becomes more sensitive issue for proper drive operation. Effects of the cable length and high switching frequency influence both on rmtor and inverter. When the insulation level of rmtor winding is low, the failure probability caused by high peak voltage and fast voltage rise times(dv/dt) is high. Voltage refloctions are simulated far rmtor capacities, ASD and rise times and are presented graphically. The filtering techniques are discussed to reduce the rmtor terminal overvoltage and dv/dt in inverter fed AC rrntor drive systems. We confirmed that the lower motar capacity and rmtar insulation level, the shorter switching time and cable length and the higrer the probability of insulation breakdown .kdown .

  • PDF