• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.5 s.120
• /
• pp.478-485
• /
• 2007

In this paper, an unequal 1:N Wilkinson power divider with adjustable dividing ratio is proposed. The proposed unequal power divider is composed of basic Wilkinson structure. It consists of rectangular-shaped defected ground structure (DGS), isolated island pattern in DGS, and varactor diodes of which capacitance depends on bias voltage. The characteristic impedance value of microstrip line having DGS goes up and down by controlling bias voltage for diodes, and consequently the power dividing ratio(N) is adjusted. The obtained N from measurement is $2.59{\sim}10.4$ which mean the proposed divider has adjustable unequal dividing ratio.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.5
• /
• pp.197-203
• /
• 2008

In this work, we present a novel genetic approach to solve the problem of combining power control and data rate transmission adjustment for the performance enhancement of the next generation CDMA system. We obtained the optimal solution of multi rate and power control problem by compromising slightly on SIR limit values. The proposed algorithm was able to handle many more users with comparable or faster convergent service. While this paper considered two kinds of fitness function such as maximizing the total transmission data rate and maximizing the acceptable mobiles of CDMA cellular network, the evaluation function combining these two cases or others can be also easily implemented. The simulation results showed the effectiveness and validity of our approach.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.4
• /
• pp.657-662
• /
• 2019

The power consumption of wearable sensors and electrocardiogram regulators should be very low to extend the network lifetime and anticipated QoS( : Quality of Service) control such as error correction and authentication of data processed by WBAN( : Wireless Body Area Network) nodes is important. Therefore, QoS control is the most urgent concern to implement WBAN in health monitoring regulations. For optimal QoS control, we compare the energy efficiency and the average number of transmissions with IEEE 802.15.6 and the error correction method considering energy efficiency. The performance of the proposed error correction technique shows that the energy efficiency and the transmission rate are improved by adjusting the coding rate appropriately using the channel estimation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.5B
• /
• pp.318-325
• /
• 2008

HomePlug AV(HPAV) is the standard for distribution of Audio/video content as well as data within the home by using the power line. It uses a hybrid access mechanism that combines TDMA with CSMA/CA for MAC technology. The CSMA/CA protocol in HPAV has two main control blobs that can be used for access control: contention window(CW) size and deferral counter(DC). In this paper, we extensively investigate the impacts of CW and DC on performance through simulations, and propose an adaptive mechanism that adjusts the CW size to enhance the throughput in HPAV MAC. We find that the CW size is more influential on performance than the DC. Therefore, to make controlling the network easier, our proposal uses a default value of DC and adjusts the CW size. Our scheme simply increases or decreases the CW size if the network is too busy or too idle, respectively, We compare the performance of our proposal with those of the standard and other competitive schemes in terms of throughput and fairness. Our simulation and analysis results show that our adaptive CW mechanism performs very well under various scenarios.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.12B
• /
• pp.1183-1191
• /
• 2010

In this paper, I propose an adaptive OFDM CP length algorithm for in PLC systems for smart grid. The proposed scheme calculates the channel delay information at the CP controller of the receiver by taking correlation between a received data frame and the following delayed one. The CP controller, immediately, feeds back the channel delay information to the transmitter. Then, the transmitter adapts CP length for next data frame. As an impulsive noise model, Middleton Class A interference model was employed. The performance is evaluated in terms of packet data rate, cumulative packet data rate, and bit error rate (BER). The simulation results showed data gain (which is the amount of the reduced bits) gets larger as the number of packets increase, but the amount of data gain reduced as the number of branches ($N_{br}$) increase. In respects of BER for the cases $N_{br}$ is 3, 4, and 5, performance of the adaptive CP length algorithm and the fixed CP scheme are similar. Therefore, it is confirmed the proposed scheme achieved data rate increment without BER performance reduction compared to the conventional fixed CP length scheme.

• KIPS Transactions on Computer and Communication Systems
• /
• v.6 no.5
• /
• pp.231-238
• /
• 2017

A Class B device in LoRaWAN periodically receives a Beacon message from a gateway for synchronization, and it also periodically activates a ping slot to receive data from the server. In this paper, we save energy consumption by controlling the beacon-less operation which is immediately started on the packet loss. In addition, we propose a method that the server inactivates the ping slots of a device according to the amount of messages, which have to be received from the server, to save energy consumption resulting from activated but unused empty slots. The experiment with the 20% of packet loss rate showed that the reduced beacon-less operation and the inactivation of the ping slot decrease the energy consumption by 96.7% and 60% as compared to the existing method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.3
• /
• pp.580-585
• /
• 2009

Real Time Locating Systems (RTLS) are used to track and identify the location of objects in real time using simple, inexpensive tags attached to or embedded in objects and readers that receive the wireless signals from these tags to determine their locations. A tag is powered an internal source such as a battery. The blink frequency of a tag affects the energy efficiency and the locating accuracy of RTLS. The mobility of a tag also affects the locating accuracy. In this paper, we introduce a RTLS tag design which improves the locating accuracy and the power efficiency. We propose an adaptive transmission-rate control algorithm using a motion sensor. By analyzing the signal pattern of the motion sensor, we can build a model to estimate the speed of the motion. Using this model, our algorithm can achieve better locating accuracy and lower power consumption than those of the conventional method. In our experiments, the number of transmission reduced as 40%, keeping similar locating accuracy.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.6 no.4
• /
• pp.325-332
• /
• 2001

The vestibular system located in the inner ear controls reflex body posture and movement, It has the semicircular canals sensing an angular acceleration and the otolith organs sensing a linear acceleration. With this organic signal, medical doctor decide if a person has disease or not. To obtain this data, a precision stimular system is considered. Robust control is needed to obtain eye signals induced by off-vertical axis rotation because of an unbalanced load produced by tilting the axis of the system upto 30 degrees. In this study, off-vertical axis rotatory system with visual stimulation system are developed. This system is consisted of head mounted display for generating horizontal, vertical, and three dimensional stimulus patterns. Furthermore wireless recording system using RF modem is considered for noiseless data transmission. Detailed data was described.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.8
• /
• pp.12-17
• /
• 2009

We have implement어 a bust mode optical transmitter using digital temperature compensation architecture with a microprocessor. Instead of previous analog real time technique, we used digital sampling and holding technique for the temperature compensation in order to get stable high speed data transmission of the laser diode. This digital temperature compensation technique should be complemented the previous analog method with accuracy and effectiveness in the over Gb/s transmitting application.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.2
• /
• pp.53-60
• /
• 2014

The recent electric power shortage has led to the vigorous study for energy conservation in the many different fields. In this paper, cell zooming technology, which can reduce the energy loss at the base stations controlling the transmission power of the stations depending on the changing trffic density for reduce energy consumption that occurs when there is little or no trffic in the service area, is proposed and energy conservation is confirmed by comparing base stations' service scenario depending on traffic change.