• Journal of Powder Materials
• /
• v.30 no.6
• /
• pp.484-492
• /
• 2023

In this study, Ni-Y₂O₃ powder was prepared by alloying recomposition oxidation sintering (AROS), solution combustion synthesis (SCS), and conventional mechanical alloying (MA). The microstructure and mechanical properties of the alloys were investigated by spark plasma sintering (SPS). Among the Ni-Y₂O₃ powders synthesized by the three methods, the AROS powder had approximately 5 nm of Y₂O₃ crystals uniformly distributed within the Ni particles, whereas the SCS powder contained a mixture of Ni and Y₂O₃ nanoparticles, and the MA powder formed small Y₂O₃ crystals on the surface of large Ni particles by milling the mixture of Ni and Y₂O₃. The average grain size of Y₂O₃ in the sintered alloys was approximately 15 nm, with the AROS sinter having the smallest, followed by the SCS sinter at 18 nm, and the MA sinter at 22 nm. The yield strength (YS) of the SCS- and MA-sintered alloys were 1511 and 1688 MPa, respectively, which are lower than the YS value of 1697 MPa for the AROS-sintered alloys. The AROS alloy exhibited improved strength compared to the alloys fabricated by SCS and conventional MA methods, primarily because of the increased strengthening from the finer Y₂O₃ particles and Ni grains.

• Journal of Korean Academy of Nursing
• /
• v.54 no.1
• /
• pp.18-31
• /
• 2024

Purpose: This study aimed to investigate the impact of anthropometric indices of obesity (body mass index [BMI], waist circumference, waist hip ratio, and body fat percentage) on the incidence of hypertension in adults with prehypertension. Methods: A longitudinal study design using secondary data form the Korean Genome and Epidemiology Study was employed. The study included 1,838 adults with prehypertension tracked every two years from 2001 to 2018. Statistical analyses, including frequency assessments, number of cases per 1,000 person-years, log-rank tests, Kaplan-Meier curves, and Cox's proportional hazards regression, were conducted using SPSS version 25. Results: Over the observation period (15,783.6 person-years), 1,136 individuals developed hypertension. The incidence of hypertension was significantly higher in the obesity groups defined by BMI (hazard ratio [HR] = 1.33), waist circumference (HR = 1.34), waist hip ratio (HR = 1.29), and body fat percentage (HR = 1.31) compared to the non-obese group. These findings indicate an increased risk of hypertension associated with obesity as measured by these indices. Conclusion: The study underscores the importance of avoiding obesity to prevent hypertension in individuals with prehypertension. Specifically, BMI, waist circumference, waist hip circumference, and body fat percentage were identified as significant risk factors for hypertension. The results suggest the need for individualized weight control interventions, emphasizing the role of health professionals in addressing the heightened hypertension risk in this population.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.39 no.4
• /
• pp.204-213
• /
• 2023

Invasive or non-invasive reduction of fractures could be conducted as treatments of traumatic maxillofacial bone fractures. But when suboptimal reduction or malunion of maxillofacial bone fracture occurs, malocclusion could occur as a result of the lost relationship of the mandible and midface. This malocclusion is called post-traumatic malocclusion and orthognathic surgery, orthodontic treatment, selective grinding and prosthetic reconstruction are suggested as treatments for post-traumatic malocclusion after securement of stable TMJ. Stable TMJ is essential for occlusal rehabilitation to prevent occlusal change and relapse of malocclusion. Centric relation and adapted centric posture are suggested as start points of occlusal rehabilitation because they are most stable TMJ position. This case report presents a case in which post-traumatic malocclusion occurred after reduction of panfacial fracture. To rehabilitate full mouth occlusion, selective grinding and prosthetic reconstruction of implant supported fixed prostheses were conducted in centric relation and showed satisfying results in functional and occlusal aspects.

• The Bimonthly Magazine for Agrochemicals and Plant Protection
• /
• v.2 no.11
• /
• pp.49-54
• /
• 1981

벼 통일계 신품종이 지난 1971년부터 우리나라에 재배돼면서부터 이들 신품종은 녹색혁명의 총아로 각광을 받게됐으며 더욱이 이들 신품종은 도열병에 대한 내병성이 강한것으로 알려져 증산의 꿈은 조기에 실현될듯 했다. 그러나 1976년 전북진안에서 1977년에는 임실에서 도열병변이균이 발견되더니 급기야 1978년에는 전국적으로 만연, 통일계품종이 이병화 품종으로 전락됐다. 올해는 전북 운봉에서 황숙기에 목도열병이 발생, 일부 지방 및 중앙지에 새로운 도열병이 발생됐음을 보도했다. 그러나 현지 농촌진흥원의 조사결과로는 새로운 변이균이 아니고 재래균으로 판명되고 있어 일단 안심은 돼나 이 지역이 위치$\cdot$기후적으로 새로운 도열병변이균이 발생될 가능성이 많은 지역이라 올해에 문제됐던 운봉지역 목도열병의 발생실태와 대책을 2회에 걸쳐 알아본다.

• Bulletin of the Korean Chemical Society
• /
• v.10 no.1
• /
• pp.57-60
• /
• 1989

UV irradiation of anthraquinone and diphenylacetylene in benzene gave 1:1 photoadduct (7) and cyclization product (8). The photoreaction of anthrone and diphenylacetylene in dichloromethane afforded the photooxidation products (7, 8, and 9) in air. The photoproduct (7) underwent the cyclization reaction during the purification by the column chromatography (silica gel). When irradiated with 350 nm UV light, the product (11) of benzil reacted with diphenylacetylene to give a photoadduct(12).

• Journal of the Korean Society of Mechanical Technology
• /
• v.13 no.2
• /
• pp.1-7
• /
• 2011

The CFRP composite has a lot of merits such as mechanical characteristic, light and thermal resistance. For these merits, CFRP is applied to so many industrial area. In order to use the composite materials in the aircraft structures or machine elements, accurate surfaces for bearing mounting or joints must be provided, which require precise, machining. In this study, the specimens differentiating the stacking sequence of 5kinds were used. When drilling the carbon fiber reinforced plastics, it was checked on whether the stacking sequence reached any effect on the cutting force. Also relationship between the drill diameter is examined from the drilling experiment, which is the drilling of Fabric, Unidirectional specimen with ∅6mm, ∅10mm, ∅12mm cemented carbide drill. Considering cutting force and drilling diameter, the results are analyzed.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.4
• /
• pp.390-394
• /
• 1997

Nucleophilic substitution reactions of 2-thiopheneethyl benzenesulfonates (2-TEB) and 3-thiopheneethyl benzenesulfonates (3-TEB) with anilines and N,N-dimethylanilines (DMA) are investigated in acetonitrile at 60.0 ℃. The cross-interaction constants ρxz determined for the reactions with anilines are large negative (- 0.50) which are comparable to those for the similar predominantly frontside-attack SN2 reactions of 1-phenylethyl (1-PEB), 2-phenylethyl (2-PEB) and cumyl benzenesulfonates. A large negative ρxz value (- 0.4∼- 0.8) is considered to provide a mechanistic criterion for the frontside-attack SN2 mechanism with a four-center transition state. In agreement with this proposal the kinetic isotope effects, kH/kD, involving deuterated aniline nucleophiles are all greater than one reflecting partial N-H(D) bond cleavage in the transition state. The MO theoretical reactant structures of 1-PEB, 2-PEB and 2-TEB based on the PM3 calculation show that the benzene ring blocks the backside nucleophile approach to the reaction center carbon (Cα) enforcing the frontside-attack SN2 mechanism.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.3
• /
• pp.23-36
• /
• 2019

Stretchable electronic systems have recently been gaining more and more attention because of their potential applications in various implements such as electronic skins and wearable/shape-deformable electronics. An essential factor of the stable stretchable device implementation is that all the elements constituting the system must have sufficient elasticity and exhibit stable performances even under repetitive stretching conditions. In this paper, we review the latest research results to secure the stable stretchability of electrodes among the various components of the system.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.9-9
• /
• 2016

많은 연구들에서 단변량 수문 변량들에 대한 불확실성 분석이 이루어지고 있지만, 다변량에 대한 불확실성에 관한 연구는 아직까지 정확하게 이루어지고 있지 않은 실정이다. 이에 본 연구에서는 갈수기(12월~4월)의 강수, 온도와 남방진동(El Ni?o-Southern Oscillation, ENSO)과 같은 수문기상학적 변량들 사이의 시간에 따른 변동 구조를 조사하고, 식별된 패턴을 이용한 강우와 온도의 예측 향상 가능성을 살펴보았다. 수문기상학적 변수간의 시변성 구조를 이해하기 위해서 각각의 단변량 매개변수와 시간에 따라 변화하는 Copula 매개변수를 동시에 추정할 수 있는 Copula 함수 기반의 새로운 다변량 비정상성 모델을 개발하고자 한다. 강우와 온도의 비정상정 단변량 분포를 생성하기 위해 ENSO 지표 또는 시계열 예측인자와 함께 시변성 모델을 적용할 수 있다. 최종적으로, 확인된 시간 변동적인 구조와 연관된 종관 패턴을 나타내고 논의하고자 한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.11a
• /
• pp.604-607
• /
• 2012

소셜 네트워크 서비스의 하나인 트위터는 팔로우를 통하여 사용자 간의 관계를 맺을 수 있다. 트위터 사용자들은 다양한 팔로워들이 존재한다. 이 팔로워들은 사용자에 대한 호감을 가지고 팔로우 하거나, 맹목적으로 추종하거나, 부정적인 의견을 지니고 사용자의 행동과 글을 관찰하기 위해 팔로우할 수도 있다. 본 논문에서 사용자에게 팔로워들이 어떠한 목적으로 그 사용자를 팔로워의 행태를 분석하는 모델을 제안한다. 대상사용자의 영향력 있는 팔로워를 추출하고, 팔로워의 리트윗 정보, 프로파일, 최신 트윗의 감정분석을 통해 지지자, 중립, 비지지자로 분류한다. 제안 방법의 유효성을 검증하기 위해 트윗 데이터에서 정치인과 언론인 5 명의 팔로워들 중 무작위로 3 만명을 추출하여 실험하였다. 실험 결과 영향력 있는 사용자 추출을 통한 지지 팔로워 추출이 효과적임을 알 수 있다.