• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.261-261
• /
• 2011

펄스 직류 전원 $BCl_3/SF_6$ 플라즈마를 이용하여 GaAs/$Al_{0.2}Ga_{0.8}As$의 선택적 식각을 연구하였다. 식각 주요 공정 변수는 $BCl_3/SF_6$ 플라즈마에서 $SF_6$ 가스 유량(0~50%)이었다. $BCl_3/SF_6$의 총 가스 유량은 20 sccm이었다. 다른 공정 조건인 공정 압력(100 mTorr), 펄스 파워(500 V), 펄스 주파수(200 kHz), 리버스 시간 (0.7 ${\mu}s$)은 일정하게 고정시켰으며 기계적 펌프만을 이용하여 공정을 진행하였다. 오실로스코프(Oscilloscope) 데이터에 의하면 가스의 조성 변화에도 척에 걸리는 입력 전압과 전류가 거의 변화가 없었다. $BCl_3/SF_6$ 가스가 10%의 조성에서 GaAs와 $Al_{0.2}Ga_{0.8}As$의 식각 선택비가 약 48 : 1로 우수한 결과를 나타내었다. 그러나 $BCl_3/SF_6$ 가스의 증가는 GaAs의 식각율과 선택도를 감소시켰다. 그리고 $SF_6$ 가스의 조성비가 30% 이상일 경우에는 GaAs와 $Al_{0.2}Ga_{0.8}As$가 식각되지 않았다. 식각 후에 GaAs의 표면 거칠기(RMS surface roughness)는 0.7~1.3 nm로 나타났다. 위의 결과들을 종합적으로 보면 펄스 직류 전원 $BCl_3/SF_6$의 조성비가 10%일 때 가장 좋은 식각 선택비를 얻을 수 있었다.

• Journal of Sensor Science and Technology
• /
• v.10 no.2
• /
• pp.91-100
• /
• 2001

A $8{\times}8$ foveated (log-polar) retina chip for edge detection has been designed and fabricated using CMOS technology. Retina chip performs photo-input sensing, edge extraction and motion detection and we focused edge extraction. The pixel distribution follows the log-polar transform having more resolution in the center than in the periphery and can reduce image information selectively. This kind of structure has been already employed in simple image sensors for normal cameras, but never in edge detection retina chip. A scaling mechanism is needed due to the different pixel size from circumference to circumference. A mechanism for current scaling in this research is channel width scaling of MOS transistor. The designed chip has been fabricated using standard $1.5{\mu}m$ single-poly double-metal CMOS technology.

• Science of Emotion and Sensibility
• /
• v.8 no.4
• /
• pp.403-413
• /
• 2005

The purpose of the present study was to investigate the responses to positive/negative emotional stimuli for the different sensitivities of behavioral activation system (BAS) and behavioral inhibition system (BIS). We recorded If-channel EEG data for 8 BAS sensitive subjects an48 BIS sensitive subjects. EEGs were analyzed with LORETA (Low-resolution electromagnetic tomography) From scalp-recorded electrical potential distribution, LORETA computes the three-dimensional intracerebral distributions of current density for specified EEG frequency bands. hs results , significant differences between the BAS sensitive group ant the BIS sensitive group appeared LORETA alpha activities over the prefrontal lobe and the cingulate gyrus. Prefrontal regions and limbic system including cingulate gyrus are involved in emotional processing. Moreover, subjects with the high BAS sensitivity. responded more sensitively to the positive stimulation than subjects with the high BIS sensitivity. Therefore, our results suggest the possibility of correlation between BAS/BIS sensitivity and positive/negative emotional stimuli.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.4C
• /
• pp.371-379
• /
• 2002

In this paper, the MMIC SPST switches operating from DC to 3GHz were designed and implemented. Prior to the design of switches, the small and large-signal switch models were needed to predict switch performance accurately. The newly proposed small-signal switch model parameters were extracted from measured S-parameters using optimization technique with estimated initial values and boundary limits. In the extraction of large-signal switch model parameters, the current source was modeled by fitting empirical equations to measured DC data and the charge model was derived from extracted channel capacitances from measured S-parameters varying the drain-source voltage. To design basic series-shunt SPST switches and isolation-improved SPST switches, we applied this model to commercial microwave circuit simulator. The improved SPST switches exhibited 0.302dB insertion loss, 35.762dB isolation, 1.249 input VSWR, 1.254 output VSWR, and about 15.7dBm PldB with 0/-3V control voltages at 3GHz.

• Journal of the Korean Society for Railway
• /
• v.19 no.1
• /
• pp.46-53
• /
• 2016

LED light sources have been known to have a long life and good energy efficiency compared to traditional light sources. Recently, headlamps using LED light sources have ensured the forward visibility and safe operation of high-speed rolling stock. However, assessing the lifespan of LED headlamps based on real test data is not easy because it depends on the multiple stress factors such as a fixed driving current, junction temperature, vibration and so on. Generally, LED headlamps have failed before their advertised life span mainly due to temperature. Thus, the performance assessment of a temperature control unit should be done before a life cycle test of LED headlamps. This study attempted to develop a prototype temperature control module for a lifecycle test system using a commercial LED headlight and verified the system through experiments.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.2
• /
• pp.152-159
• /
• 2005

In this paper, we propose a diagnosis algorithm using fusion wかd based on PCA and LDA to detect fault states of the induction motor that is applied to various industrial fields. After yielding a feature vector from the current value measured by an experiment using PCA and LDA, training data is made to produce each matching value. In a diagnostic step, two matching values yielded by PCA and LDA are fused by probability model and finally verified. Since the proposed diagnosis algorithm takes only merits of PCA and LDA it shows excellent results under noisy environments. The simulation results to verify the usability of the proposed algorithm showed better performance than the case just using conventional PCA or LDA.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.17 no.7
• /
• pp.875-880
• /
• 2007

Scientific challenges in the field of MR(magnetorheological) fluids and devices consist in the development of MR devices, the mathematical modeling and simulation of MR devices, and the development of (optimal) control algorithm for MR device systems. To take a maximum advantage of MR fluids in control applications a reliable mathematical model, which predicts their nonlinear characteristics, is needed. A inverse model of the MR device is required to calculate current(or voltage) input of MR damper, which generates required damping force. In this paper, we implemented test a bench for shear mode rotary MR damper and laboratory tests were performed to study the characteristics of the prototype shear-mode rotary MR damper. The direct identification and inverse dynamics modeling for shear mode rotary MR dampers using multi-layer neural networks are studied.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.2
• /
• pp.357-362
• /
• 2020

The TMFT, a sub-system of TINC, provides voice calls, data transmission and reception, and multimedia services to individual users. At the time of development in 2011, the power circuit of the TMFT was designed to electrical power supply to each device via a charger IC. However, the newly improved power supply circuit allows power to be supplied to each device through the PMIC without configuring the charger IC separately. In this paper, the power circuit design structure of TMFT applied in the development stage and the improved power circuit design structure were compared. And we verified through experiments whether the improved power circuit can be applied to TMFT. The experimental method was verified by directly comparing the current consumption test, charge time comparison test, and rising temperature test during charging each of before and after improvement terminals.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.9
• /
• pp.1100-1106
• /
• 2012

This paper has presented the analysis of the micro-Doppler signatures scattered from the blades of the rotating propeller using the modified HHT method, one of the joint time-frequency analysis methods. The field scattered from the blade edge of the propeller was calculated using equivalent current method(ECM). After the acquisition of the scattered field data in the time domain, the modified HHT method was applied to analyze the micro-Doppler signature. The analysis results showed not only a good agreement with the realistic dynamic characteristic of the blade but also sinusoidally varing characteristics of the micro-Doppler signatures generated from rotating objects. It could be concluded that the joint time-frequency analysis via the modified HHT provided the discriminative characteristics for recognizing a small aircraft target with small RCS value.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.1
• /
• pp.132-140
• /
• 2008

Power system of Jeju is interconnected to the mainland using HVDC and that is also interconnected two wind farms. Control of Jeju power system will be difficult if HVDC is disconnected or HVDC is overhauled under large scale wind farms interconnected. We measured and analysed the power quality of two substation and two wind farms to assess that wind farms and HVDC overhaul have an effect on Jeju system or not during the HVDC overhaul. We found that the frequency of Jeju system is very unstable and the voltage distortion excess the limitation. Harmonic currents of wind farms flew into Jeju system in proportion to the power of wind turbine. And the voltage of nearby distribution line was distorted by power of wind turbine when the amount is more that 3,000[kW].