• Journal of IKEEE
• /
• v.22 no.4
• /
• pp.1012-1018
• /
• 2018

In this paper, CMOS SAR (Successive Approximation Register) A/D converter with 1.8V supply voltage is designed for IoT sensor processing. This paper proposes design of a 12-bit SAR A/D converter with two A / D converters in parallel to improve the sampling rate. A/D converter1 of the two A/D converters determines all the 12-bit bits, and another A/D converter2 uses the upper six bits of the other A/D converters to minimize power consumption and switching energy. Since the second A/D converter2 does not determine the upper 6 bits, the control circuits and SAR Logic are not needed and the area is minimized. In addition, the switching energy increases as the large capacitor capacity and the large voltage change in the C-DAC, and the second A/D converter does not determine the upper 6 bits, thereby reducing the switching energy. It is also possible to reduce the process variation in the C-DAC by proposed structure by the split capacitor capacity in the C-DAC equals the unit capacitor capacity. The proposed SAR A/D converter was designed using 0.18um CMOS process, and the supply voltage of 1.8V, the conversion speed of 10MS/s, and the Effective Number of Bit (ENOB) of 10.2 bits were measured. The area of core block is $600{\times}900um^2$, the total power consumption is $79.58{\mu}W$, and the FOM (Figure of Merit) is 6.716fJ / step.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.7 no.6
• /
• pp.871-880
• /
• 2017

Recently, service based on internet is inter-connected and integrated with a variety of connection. This kind of internet of things consist of heterogenous devices such as sensor node, devices and end-to end equipment which used in conventional protocols and services. The representative system is healthcare system. From healthcare appliance used by IoT, patient and doctor can utilize healthcare information with safety and high speed management. It is very convenient management to operate mobility. But it induced security and vulnerability issues because it has small memory capacity, low power supply and low computing power. This made impossible to implement security algorithm with embedded engine based on hardware. Nowdays, we can't realize conventional standard algorithm due to these kinds of reasons. From the critical issues, it occurred security and vulnerability issues. Therefore, we analysed and compared with conventional method and proposed techniques. Finally, we evaluated security issues and requirement for end-to-end point healthcare system based on internet of things.

• KIPS Transactions on Computer and Communication Systems
• /
• v.6 no.8
• /
• pp.353-358
• /
• 2017

An electrical power utility, like an electrical power pole, includes various kinds of sensors for smart services. Temperature data is considered one of the important factors that can influence the smart operations of this utility. This study suggests a method for temperature data analysis for deciding the status of the smart electrical power utilities by using Kalman Filter and Ensemble Model. The suggested approach separates the temperature data according to the different positions of the temperature sensors of a utility, then uses Kalman Filter and Ensemble Model to analyse the characteristics of the temperature variation. With detailed processes, method explains the variation between an external temperature factor like weather temperature data and the sensed temperature data, and then, analysis the temperature data from each position of electrical power utilities. In this process, the suggested method uses Kalman Filter to remove error data and the ensemble model to find out mean value of every hour of electrical data. The result and discussion of temperature analysis were described clearly with the analysed results of electrical data. Finally, we were able to check the working condition of the power devices and the range of the temperature data foe each devices, which may help to indicate any causalities with respect to the devices in the utility pole.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.122-122
• /
• 2018

1. 배경 최근 IoT 기술이 발전함에 따라 각종 전자기기에 들어가는 센서들이 점점 늘어나고 있다. 특히 사용자 중심의 기기들은 기술이 발전함에 따라 집적화가 이루어지면서, 하나의 기기에서 온도, 습도, 조도 등의 다양한 정보를 처리하고 있다. 이에 따라 더 많은 기능을 사용하기 위해, 소모 전력 또한 점차 증가하고 있다. 그러나 부피는 한정되어 있어, 기존 배터리만으로는 증가하는 소모 전력을 모두 보완하기 어렵다. 또한 대표적인 사용자 중심 기기인 스마트폰에서는, 가장 많은 전력을 소모하는 부분이 점점 커지고 있다. 이에 대한 대책으로 버려지는 에너지를 수확하여 전기적인 에너지로 바꿔주는 에너지 하베스팅 기술이 각광을 받고 있다. 에너지 하베스팅 기술은 바람, 진동, 인체의 움직임 등의 기계적 에너지, 태양광, 실내등의 빛 에너지를 전기적인 에너지로 바꿔주는 기술을 말한다. 본 연구에서는 강유전체 고분자 내부에 양자점이 임베딩된 박막을 이용하여, 스마트폰에서 발생하는 빛 에너지와 손가락으로 디스플레이를 터치할 때 발생하는 기계적인 에너지를 모두 수확할 수 있는 새로운 소자를 제시하였다. 소자 내부에 있는 양자점은 빛 에너지를 산란 혹은 흡수하여 발광한 후, 고분자 내부의 전반사를 통해 양 옆에 있는 태양전지로 빛을 전달한다. 또한 컴포짓의 매트릭스를 이루고 있는 강유전체 폴리머인 P(VDF-TrFE)는 강유전 특성을 통해 마찰전기 에너지를 효율적으로 전기 에너지로 전환할 수 있다. 강유전체 특성에 의해 P(VDF-TrFE) 내부에 정렬된 Polarization은 퀀텀닷에 양자구속 스타크 효과(Quantum Confined Stark Effect)를 일으켜 더 긴 파장을 방출한다. 이렇게 바뀐 파장은 실리콘 태양전지에서 더 많이 흡수할 수 있는 영역으로 방출되어 태양전지 출력의 증가를 일으킨다. 마지막으로 실리콘 태양전지의 출력 증가를 보여줌으로써 이를 실험적으로 입증했다.

• Journal of the Korean Society for Railway
• /
• v.20 no.5
• /
• pp.602-611
• /
• 2017

In railway systems, the exchange of information between running trains and wayside equipment is a very important role in various applications such as position detection and train control. Track circuits have been used as the medium for information transmission between trains and wayside. However, track circuits must be installed continuously along the track on the ground, resulting in an inevitable increase in installation and maintenance costs. One of the most promising solutions to reduce these costs is to mix continuous information transmission (via wireless communication) and discontinuous information transmission (via transponder). In this study, we designed antennas of railway high-speed transponder readers and tags for wireless power transmission, which can be used to transmit information from ground to high-speed trains with a maximum speed of 400km/h. We also verified system performance through computational simulation and prototyping.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.6
• /
• pp.83-90
• /
• 2018

LoRa (Long Range) is a long-distance, low-power communication technology. Broader range of communication than NFC technology allows communication without having to install multiple APs and reduces the cost of initial infrastructure deployment. MQTT (Message, Queuing, Telemetry, Transport) protocol is also low power and lightweight protocols. It can increase module persistence and reduce maintenance costs when used with LoRa. In this paper, we developed a system for compiling various environmental information in a factory using LoRa and MQTT. Environmental sensor data from long distances can be monitored by the management system and the facilities in each workshop can be controlled. Performance tests have also shown that the use of LoRa and MQTT is effective in terms of long-distance and power consumption.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.17 no.1
• /
• pp.25-30
• /
• 2024

Smart City, a key application area of the AIoT (Artificial Intelligence of Things), provides various services in safety, security, and healthcare sectors through location tracking and location-based services. an IPS (Indoor Positioning System) is required to implement location-based services, and wireless communication technologies such as WiFi, UWB (Ultra-wideband), and BLE (Bluetooth Low Energy) are being applied. BLE, which enables data transmission and reception with low power consumption, can be applied to various IoT devices such as sensors and beacons at a low cost, making it one of the most suitable wireless communication technologies for indoor positioning. BLE utilizes the RSSI (Received Signal Strength Indicator) to estimate the distance, but due to the influence of multipath fading, which causes variations in signal strength, it results in an error of several meters. In this paper, we conducted research on a path loss model that can be applied to BLE IPS for proximity services, and confirmed that optimizing the free space propagation loss coefficient can reduce the distance error between the Tx and Rx devices.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.10 no.4
• /
• pp.207-212
• /
• 2015

Wi-Fi Direct allows battery powered mobile devices to form a wireless ad hoc network. Since one member of the network called Group Owner (GO) takes the role of managing the network, the network lifetime is mainly affected by the energy efficiency of GO. Hence, Wi-Fi Direct defines power saving schemes that allow GO to save the energy by turning off its radio interface during the periods called absence periods. However, the Wi-Fi Direct specification does not specify how to set parameters (denoted by PS parameters) determining the schedule of the absence periods. In this paper, we therefore propose a novel traffic-aware power saving scheme for Wi-Fi Direct networks. In particular, the proposed scheme estimates the application-level traffic load and adaptively tunes the PS parameters according to the estimated value.

• KIISE Transactions on Computing Practices
• /
• v.24 no.2
• /
• pp.67-76
• /
• 2018

BLE (Bluetooth Low Energy) has been extensively used for communication between mobile applications and wearable devices in IoT (Internet of Things). In developing Android applications, wearable devices, on which the applications can run, should be available because the existing Android SDK does not support any BLE emulation facility. In this study, we have designed and implemented the first Android BLE emulator. Using this, we are able to develop and test BLE-based Android applications even when without wearable devices. We have also proposed an automatic generation method of Android BLE scenarios based on graph model. We have shown that the method is useful for systematically testing BLE application protocols by running the generated scenarios on the Android BLE emulator.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.410-411
• /
• 2018

In this paper, In this paper, Smart OBD2 terminal collects OBD2 Data on the vehicle. And it passes through this with SmartPhone Bluetooth. OBD2 system is the system to use a variety of Service using it in SmartPhone. Utilizing NFC to help ordinary people, it can easily use to configure the Bluetooth Pairing. By using the Bluetooth 4.0, it is maximized compatibility of Bluetooth. Furthermore OBD2 terminal is a system to minimize the standby power of the terminal to prevent the discharge of the vehicle up issues. Anyone can develop an OBD2 connection App by providing the interfaces to make DB to develop and understand ODB2 data.