• 제목/요약/키워드: 전력 스펙트럼 밀도

검색결과 71건 처리시간 0.021초

A Study of Photoelectric Plethysmography System for the Measurement SpO2 (산소포화도 측정을 위한 광전용적맥파 시스템에 관한 연구)

  • Kim, Hong-Yeop;Kim, Kyung-Ho;Song, Min-Wook
    • Proceedings of the Korean Society of Computer Information Conference
    • /
    • 한국컴퓨터정보학회 2010년도 제42차 하계학술발표논문집 18권2호
    • /
    • pp.39-42
    • /
    • 2010
  • 본 연구에서는 두 파장을 이용한 광적용적맥파(photoelectric plethysmography, PPG)의 시스템을 기반으로 산소포화도 및 다양한 맥파 관련 건강정보를 분석할 수 있는 시스템에 관하여 연구하였다. 광적용적맥파를 이용한 산소포화도 측정을 위해 서로 다른 두 파장의 빛을 이용하여 비 침습적 맥파 측정 방식으로 손가락 끝 부분에서 측정하고, 혈액 내 헤모글로빈의 빛 대한 광흡수도의 차이를 분석하여 검출하였다. 또한 정확한 분석을 위하여 두 파장의 빛을 순차적으로 제어하는 스위칭 기법을 사용하고, 조직을 통과한 두 파장의 빛을 분리하기 위하여 수광부에 시간의 차이를 두어 각 파장에 대한 광전용적맥파를 측정하였다. 본 연구에서는 산소포화도를 측정하기 위한 방법으로 서로 다른 두 파장을 이용한 광전용적맥파 측정기기를 설계하고, 측정 결과의 정확성 및 유의성에 대한 검증하였다.

  • PDF

Frequency Analysis of EMG Signals using Power Spectral Density (전력 스펙트럼 밀도를 이용한 근전도 신호의 주파수 해석)

  • 박상희;변윤식
    • Journal of Biomedical Engineering Research
    • /
    • 제6권1호
    • /
    • pp.19-30
    • /
    • 1985
  • This paper describes the EMG signals in frequency domain using power spectral density, The changes in the moan frequency can represent the energy distribution which results from changing in load before and during fatigue. Most of EMG signal power spectrum is located between 10 and 200Hz. Shifts of the high-energy regions of the power spectra can be inferred from the changes in the mean frequency. If the load is increased without fatigue-ocurring, the high frequency regions have more energy than the low frequency regions. And if load is increased during fatigue, the low frequency regions have more energy than the high frequency regions.

  • PDF

A Study on the Transmission Length Limitation by Chromatic Dispersion in High Speed FOT스s (초고속 광파이버 전송시스템에서 색분산에 의한 전송거리 제한에 관한 연구)

  • 정은숙;김재평;정진호;김영권
    • The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
    • /
    • 제4권3호
    • /
    • pp.18-29
    • /
    • 1993
  • In single mode fiber optic transmission systems(FOT's) operated at high modulation rates over long fiber spans, chromatic dispersion can produce distortion in the demodulated waveforms, resulting in intersymbol interference(ISI) in the received signal and a reduction of transmission system performance. In this paper, chromatic dispersion limitations for intensity modulation and direct detection(IM-DD) systems are studied by considering the effect of phase modulation to amplitude modulation (PM-AM) conversion noise. Laser phase noise conversion to amplitude noise due to fiber chromatic dispersion is analyzed by deriving the noise power spectral density. We first derive the noise power spectral density of the laser phase noise to intensity noise conver- sion. Next, also evaluate the system power penalty and the transmitter laser linewidth required to avoid PM-AM conversion noise penalties in long-haul nonregenerative transmission system using an external modulator and optical amplifiers. For such system with optical amplifiers, transmission sys- tem length is limited due to fiber chromatic dispersion, even if an ideal external modulator is used.

  • PDF

Performance Analysis of the UHF RFID Reader with the Range Correlation Effects of the Phase Noise (위상 잡음의 거리 상관 효과에 따른 UHF RFID 리더의 성능 분석)

  • Jang, Byung-Jun;Kang, Min-Soo;Lim, Jae-Bong
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • 제19권2호
    • /
    • pp.152-160
    • /
    • 2008
  • In this paper, we analyze the performance of a direct-conversion UHF RFID reader with the range correlation effects of the phase noise. Since a UHF RFIB system uses the same oscillator to generate the transmitted carrier and the local oscillation, the periodic interference and phase noise reduction effects occur due to time delay between two signals. Through exact theory and simulation, we verify how to cancel the periodic interference phenomena using I/Q diversity combining technique. And, we analyze phase noise reduction effects due to range correlation as a function of the tag-reader distance and the offset frequency Using these results, we simulate the symbol-error-rate performance with respect to phase noise with and without range correation effects. We show that the phase noise of the local oscillator has little effect on the symbol-error-rate performance because of phase noise reduction by range correlation.

1/f Noise Characteristics of N-MOSFETS fabricated by BiCMOS process (BiCMOS공정 N-MOSFET 소자의 1/f 잡음특성)

  • Koo, Hoe-Woo;Lee, Kie-Young
    • Journal of IKEEE
    • /
    • 제3권2호
    • /
    • pp.226-235
    • /
    • 1999
  • To investigate SPICE noise model and the behavior of its parameters, 1/f noise of NMOS devices fabricated by BiCMOS process is measured and compared to the various noise models and measured results. For the long channel devices, bias dependence of the drain current noise power spectral density $S_{Id}$ of NMOS is similar to the previous results. Equivalent gate noise power spectral density $S_{Vg}$ shows weak dependence on the gate and drain voltages in long channel NMOS as the previous results. However, it is shown that most of published noise models are difficult to apply to short channel devices. Therefore, in this study, with comparison of our experimental results, we have tried to find the model of 1/f noise, appropriate for our NMOS device fabricated by BiCMOS process.

  • PDF

Development of Programs to Analyze Mechanical Load Data of Wind Turbine Generator Systems and Case Studies on Simulation Data (풍력발전시스템의 기계적 하중 데이터 분석 프로그램 개발과 시뮬레이션 데이터 적용 사례)

  • Bang, Je-Sung;Han, Jeong-Woo;Gil, Kyehwan
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • 제37권8호
    • /
    • pp.789-798
    • /
    • 2013
  • The procedures and relevant programs developed for analyzing mechanical load data of wind turbine generator systems, which are obtained through type certification tests, are verified. The following issues according to IEC 61400-13 are covered in the developed programs: data validation, time series analysis, summary load statistics, generation of fatigue load spectra, and estimation of equivalent loads. A capture matrix for normal power production is generated to determine whether the collected data sets are sufficient to carry out fatigue analysis. Fatigue load spectra are obtained through the rainflow counting method using 50 load ranges; finally, equivalent loads are calculated using different S-N curve slopes, m, according to the relevant materials. Case studies are performed using aero-elastic simulation data of the NREL 5 MW baseline wind turbine with a monopile foundation.

The Performance Analysis of DS/SSMA BPSK Correlation Receivers in Electric Power Line Channel (전력선 채널에서의 DS/SSMA BPSK 코릴레이션 수신기 성능에 관한 연구)

  • Kang, Byeong-Kwon;Cho, Chang-Gil;Cho, Kwan;Lee, Jae-Kyeong;Whang, Keum-Chan
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • 제17권9호
    • /
    • pp.972-981
    • /
    • 1992
  • In this paper, the performance of linear and hard-limiting correlation receivers for DS/SSMA BPSK power line communication system is analyzed. Strong impulsive noise of power line is modeled with Chan's noise model, and the performance of both receivers is analyzed in terms of parameters such as ratio of power spectrum density of impulsive noise to that background noise, ratio in impulsive noise width th that of data bit, and interarrival time of impulsive noise. And also multiple access capacity is evaluated with Gaussian approximation of multiple access interference. The results of this analysis reveal that the performance of linear correlation receiver is superior to that of hard-limiting correlation receiver when $N_1/N_b$ is small and is close to 1. But the BER and the multiple access capacity of hard-limiting correlation receiver becomes better in comparison with linear correlation receiver as $N_1/N_b$ increases.

  • PDF

Bandwidth Analysis of High-order Pulse for the Transmission of Ultrashort Laser Pulses (극초단펄스 전송을 위한 고차원펄스의 스펙트럼 대역 분석)

  • 전진성;조형래;오용선
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 한국해양정보통신학회 1999년도 춘계종합학술대회
    • /
    • pp.237-242
    • /
    • 1999
  • In this paper, we analyze transmission characteristics of ultrashort laser pulses using the property of high-order pulses which are systematically obtained following their orders. The high-order pulses are easily derived from a modified PRS system model. But we make clear they are very useful to cover wider area and more accurate transmission characteristics of ultrashort pulses than Gaussian or Sech pulse approximations used conventionally. This may be based on the fact that the spectra and bandwidths of the high-order pulses are beautifully related to their orders. first modifying the generalized PRS system model, we propose a new model for deriving any type of high-order pulse. And we offer a novel analysis method of ultrashort pulse transmission which has any shape and FWHM, using the proposed model. In addition, by fixing the pulse range $\tau$=1(ps) and varying the order of the pulse from n:1 to n=100, we obtain spectra of ultrashort pulses with 1(ps)-150(fs) FWHM's, which are widely used in fiber communications. As a one-step further, we derive PSD's of their pulse trains when they are applied to Unipolar signaling scheme. These PSD's are decided in the range of possible pulse intervals. All of these results are not only coincided with some conventional experimental works but also will be applied to any pioneering ultrashort pulse in the future.

  • PDF

Optimum Parameter and Performance Analysis of Outer-Loop Power Control in IMT-2000 (IMT-2000 외부회로 전력제어의 최적변수 및 성능 분석)

  • Lee, Jae-Seong;Jang, Yeong-Min;Jeon, Gi-Jun
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • 제39권1호
    • /
    • pp.11-19
    • /
    • 2002
  • This paper gives an optimal step size of E$\sub$b/ /I$\sub$oT/ for outer-loop power control(OLPC) in IMT-2000 system. The performance of outer-loop Power control is affected greatly by the fixed step size according to the channel environments. Conventional methods are inaccurate because they are decided by expert's experiences and the performance is not proved theoretically. In this paper, we show that IMT-2000 system maintains optimal capacity and QoS by the step size of E$\sub$b/ /I$\sub$oT/ obtained from the discrete-time Markov chain model.

Analytical Formula of the Excess Noise in Homogeneous Semiconductors (균질 반도체의 과잉 잡음에 관한 해석적 식)

  • Park, Chan-Hyeong;Hong, Sung-Min;Min, Hong-Shick;Park, Young-June
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • 제45권9호
    • /
    • pp.8-13
    • /
    • 2008
  • Noise in homogeneous extrinsic semiconductor samples is calculated due to distributed diffusion noise sources. As the length of the device shrinks at a fixed bias voltage, the ac-wise short-circuit noise current shows excess noise as well as thermal noise spectra. This excess noise behaves like a full shot noise when the channel length becomes very small compared with the extrinsic Debye length. For the first time, the analytic formula of the excess noise in extrinsic semiconductors from velocity-fluctuation noise sources is given for finite frequencies. This formula shows the interplay between transit time, dielectric relaxation time, and velocity relaxation time in determining the terminal noise current as well as the carrier density fluctuation. As frequency increases, the power spectral density of the excess noise rolls off. This formula sheds light on noise in nanoscale MOSFETs where quasi-ballistic transport plays an important role in carrier transport and noise.