• Proceedings of the Korean Information Science Society Conference
• /
• 2004.04a
• /
• pp.106-108
• /
• 2004

본 논문은 기존 전력 소비 감소만을 고려한 DVS와 달리 배터리 특성에 기반하여 DVS를 수행하는 기법을 제시한다. 배터리는 잔량에 따라 다른 전력 소비형태를 갖고 있으므로 잔량에 따라서 적합한 DVS 정책을 수행해야 효율적이다. 본 논문에서는 실험을 통해서 배터리의 특성을 파악하고, 그 특성에 따라 배터리 구간을 설정한 후 그에 적합한 DVS 알고리즘을 적용하는 기법을 제시한다. 이를 통해 효율적인 DVS 정책을 수립 할 수 있음을 IPAQ 5550 PDA에서 리눅스 운영 체제에서의 실험을 통해 보여준다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.10a
• /
• pp.541-543
• /
• 2004

배터리의 용량이 제한적인 핸드헬드 시스템에서의 주요 전력소비원인 프로세서의 전력소비를 절감시키기 위한 동적전압변경 기법에 관련한 많은 연구가 이루어지고 있으나, 프로세서에 집중된 DVS는 MPEG클립 재생과 같은 멀티미디어 응용프로그램에 있어서 빈번히 발생하는 프로세서와 주 메모리간의 상호작용은 충분히 설명하지 못하고 있다. 본 연구에서는 주 메모리와 프로세서간의 상호작용을 반영한 동적 전압변경을 제시하고 실제 시스템에서의 구현 결과를 제시함으로써 메모리인지 동적전압변경 기법이 멀티미디어 응용에 있어서 고전적 DVS방법보다 QoS를 유지하면서 부가적인 전력 절감을 할 수 있음을 보인다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.04d
• /
• pp.196-198
• /
• 2003

배터리를 주 전력원으로 사용하는 MANET(Mobile Ad hoc NETwork)에서 전력 소비를 줄이는 방법에 대한 연구가 활발히 진행되고 있지만, 이의 실험을 지원하는 시뮬레이션 도구를 찾아보기는 어렵다. 본 논문에서는 IEEE 802.11의 DCF-PSM 시뮬레이션 환경을 제공하기 위해 ns-2에 PSM 모듈을 구현하였고, 특히 전력 소비와 관련된 결과 자료를 쉴게 생성하기 위해 여러 가지 편의성을 제공하는 에너지 모델을 제안하였다. 이러한 모들의 개발로 PSM 환경에서의 상위 계층 프로토콜의 성능 평가나 PSM에 적합한 새로운 상위 계층 프로토콜의 개발이 가능해졌고, PSM을 개선하는 알고리즘의 구현과 그의 성능 평가도 훨씬 쉽게 이루어질 수 있게 되었다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2023.11a
• /
• pp.549-552
• /
• 2023

현재 전력망에서는 불규칙하거나 낭비되는 전력 문제를 해결하기 위한 한 방법으로 ESS(Energy Storage System)를 활용하는 방법이 많은 관심을 받고 있다. 본 연구에서는 업종별로 시간대에 따라 요금을 다르게 부과하는 배전망 시스템에서, 배터리를 보다 경제적으로 사용하는 동시에 여유 용량을 유지하도록 하는 DQN 기반 강화학습 기법을 제안하였다. 또한, 업종별로 다른 전력 소비 패턴을 에이전트의 동작성과 함께 그 성능을 분석하고 비교하였다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.6
• /
• pp.1145-1152
• /
• 2019

In this paper, a low power current mode 12-bit ADC(: Analog to Digital Converter) is proposed to mix digital circuits and analog circuits with the advantages of low power consumption and high speed operation. The proposed 12 bit ADC is implemented by using 4-bit ADC in a cascade structure, so its power consumption can be reduced, and the chip area can be reduced by using a conversion current mirror circuit. The proposed 12-bit ADC is SK Hynix 350nm process, and post-layout simulation is performed using Cadence MMSIM. It operates at a supply voltage of 3.3V and the area of the proposed circuit is 318㎛ x 514㎛. In addition, the ADC shows the possibility of operating with low power consumption of 3.4mW average power consumption in this paper.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.3
• /
• pp.37-42
• /
• 2007

This paper reconsiders established power conservation models for ubiquitous sensor networks that use relay nodes instead of direct communication and proposes novel network power consumption model with consideration of the channel level and radio chip level simultaneously. We estimate the effect of minimum hop-count policy in terms of network power consumption through simulation of various situations for low power RF module CC2420. It is observed that maximum RF power and minimum hop-count results in lower energy consumption relatively. Also, in total network energy consumption, which is included re-transmission, minimum hop count policy presents decrease by 33.1% of energy consumption in compare with the conventional model.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.16 no.4
• /
• pp.443-448
• /
• 2006

In this paper, a novel method is proposed for generating the low-power and stable walking trajectory of biped robots, and then a biped robot with 25 DOFs(degrees of freedom) is designed and implemented for the realization of the low-power walking trajectory generated by the proposed method. In our method, first a stable VPCG(vertically projected center of gravity) trajectory is generated, and then the trajectories of ankle and pelvis of a biped robot are planned to follow the preplanned stable VPCG trajectory, which produces a waking pattern without bending its knees and enables a biped robot to walk with less power consumption. On the other hand, a biped robot implemented in this paper has the mechanical structure of foot that enables a biped robot to support on the ground well, and the mechanical structure of pelvis that enables a biped robot to move flexibly. From results of the walking experiment and power consumption measurement, it was confirmed that the proposed method can generate the more stable and flexible trajectory with less power consumption compared with the existing methods which do not use the ankle of a biped robot.

• Journal of Energy Engineering
• /
• v.23 no.2
• /
• pp.119-124
• /
• 2014

After the oil crisis in 1970s, many countries have tried to reduce oil dependency. Especially, in Korea, rapid declining oil consumption has speedily brought to electrification and a surge in electricity demand. This paper attempts to estimate the relationship between declining oil use and electrification in Korea using OECD panel data covering from 1985 to 2011. To this end, random effect model and fixed effect model are employed. The increase in the ratio of energy oil to total energy consumption by 10%p leads to reduce the electricity demand by about 15%. This result can be useful information to cope with the recent crisis of electric power. In addition, industrial sector is ranked in forth the ratio of industrial electricity use to total electricity use according to the result of comparative analysis of electricity consumption by use in OECD countries. Therefore, industrial sector should be treated as the main target of demand-side management policies for electricity.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.4
• /
• pp.75-81
• /
• 1999

This paper presents in the rrethod power demand estimated of consuming facility algorithm using orthogonal polynomial regression rmdel. Estimation rmdel presented can use mathematical rrethod consists. of extrapolation and correlation rrethod, Computation tirre and capacity of presented rmdel was rmre economic than multiple regression rrodel because low-order equation can use in the high-order equation without sorre correction, and vice-versa. Therefore this rmthed can be very usefulness rmthed in the power demand estimation Fourth-order rrodel was very good armng this rrodel that was coJTJp)Sed the estimation rmdel of second, third and fourth-order. Power demand estimated result of consuming facility using correlation rrethod was good in the percentage error of about 2[%1 Also It was to verify efficiency and awroPJiation the estimated rmdel that estimation percentage error was about 1[%] in the oower demand estimated result of 1997.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.8 no.3
• /
• pp.27-35
• /
• 1994

As a study on the method for energy-saving of the neon sign, this paper has systematically investigated the quantity of energy-consumption of the sign through a long period of time, according to the changes of the sign's ON/OFF speed, time ratio, etc. One neon sign(1 [kW] was built up for this. For this experiment, the ON/OFF periods(T) were set to 1.0,2.0,4.0 and 8.0[sec), and the ON time ratios(D) to 25, 50, 75 and 100 [%] respectively. Energy Analyzer was used for more accurate measurement. As the result, we found that the energy consumption of the sign had no effect on the ON/OFF period (T) when T was more than 2.0(sec), but that the energy consumption was decreasing when T was less than 2.0[sec]. The greatest value in the energy-saving of the sign appeared when the values of T and D were small altogather. And under the conditions, the energy consumption with T=1.0[sec) and D= 25[%] decreased 83.0[%] in comparison with the continuous ON case.