• Journal of Advanced Navigation Technology
• /
• 제17권2호
• /
• pp.202-207
• /
• 2013

In this paper, a high dividing ratio unequal power divider using parallel connection transmission line is presented. Because a very low impedance transmission line can't implement a microstrip technology, this can fabricate a parallel connection transmission line with high impedance. When we design a high dividing ratio divider, we need the very low impedance line. The parallel connection transmission line could be implemented to obtain a low impedance line characteristic. To validity this approach, we are implemented a 10:1 unequal divider at center frequency 1 GHz. The performances of power divider agree with simulation results.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• 제24권6호
• /
• pp.809-817
• /
• 2020

In the design and development process of Small-Sat power distribution and transmission module, the stability of dynamic resources was evaluated by a deep learning algorithm. The requirements for the stability evaluation consisted of the power distribution function of the power distribution module and demand module to the SAR radar in Small-Sat. To verify the performance of the switching power components constituting the power module PDM, the reliability was verified using a dynamic neural network. The adoption material of deep learning for reliability verification is the power distribution function of the payload to the power supplied from the small satellite main body. Modeling targets for verifying the performance of this function are output voltage (slew rate control), voltage error, and load power characteristics. First, to this end, the Coefficient Structure area was defined by modeling, and PCB modules were fabricated to compare stability and reliability. Second, Levenberg-Marquare based Two-Way NARX neural network Sigmoid Transfer was used as a deep learning algorithm.

• Proceedings of the Korea Information Processing Society Conference
• /
• 한국정보처리학회 2013년도 춘계학술발표대회
• /
• pp.584-586
• /
• 2013

스마트그리드는 기존의 전력망에 IT기술을 접목하여 기존 전력망의 노후화, 안정적인 전력 공급 등의 문제를 해결할 수 있도록 개발되었고 안정적인 전력 공급, 신재생에너지의 효율적 활용, 각 가정의 전력 구매/판매 가능 등의 장점을 갖고 있다. 하지만 폐쇄 망으로 운영되는 환경을 공개망으로 전환하기 때문에 소비자의 정보, 전력 사용량 등을 전송하는 통신과정에서 악성코드 유포, 해킹 등의 보안 위협에 노출될 수 있다. 따라서 본 논문에서는 스마트미터와 AMI 서버간의 안전한 통신을 할 수 있는 안전한 키 분배 기법을 제안한다.

• Journal of Advanced Navigation Technology
• /
• 제14권6호
• /
• pp.909-915
• /
• 2010

In this paper, the unequal power divider based on CRLH (Composite Right/Left-Handed) transmission line with dual-band characteristic is proposed. They consist of dual-band branch line hybrid coupler, the connection between input and isolation port of hybrid coupler and ${\lambda}/4$ impedance transformer. When the transmission line between input and isolation port of hybrid coupler is asymmetrical connected, the divider is obtained the output results of the equal phase and unequal power dividing ratio. The simulation results of the divider represent the power ratio of 0 dB ~ 20 dB. To validate a function of divider, the hybrid coupler and transformer with 880 MHz and 1850 MHz is implemented. As a result, the proposed unequal divider obtains the power ratio of 3.2 dB ~ 8.8 dB at 880 MHz and 2.5 dB ~ 14.0 dB at 1850 MHz.

• Journal of Advanced Navigation Technology
• /
• 제26권1호
• /
• pp.15-21
• /
• 2022

In this paper, we propose a method to implement an unequal power divider with different complex termination impedances for different output power ratios. The proposed method was designed using a matching the terminated complex impedances of the output port using only the transmission line, and presented an isolation circuits to satisfy the isolation characteristic between the terminating complex impedance ports. To prove the feasibility of this method, an unequal power divider with different load complex impedances with a splitting ratio k² = 3 dB and 1.7 dB and an unequal power divider with different complex termination impedances of all ports with a splitting ratio k² = 3 dB was designed at a center frequency of 2 GHz, and it was confirmed that the measured results of the electrical characteristics agree well the simulation.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 한국마린엔지니어링학회 2005년도 전기학술대회논문집
• /
• pp.401-405
• /
• 2005

This paper proposed a miniaturization passive element employing the multiple microstrip line. As a result of this method, we realized the transmission line miniaturized. The applying structure designed and evaluated a power divider on GaAS MMIC circuit. It draws a plan in a center Frequency as the observation could do good characteristic.

• The Journal of the Korea institute of electronic communication sciences
• /
• 제9권12호
• /
• pp.1331-1336
• /
• 2014

In this study, we have implemented a PAM(Power Amplifier Module) with 25W output power using by cooperate divider/Combiner circuit in X-band to minimize combine loss on a Al2O3 substrate. The PAM(Power Amplifier Module) is consisted of MMIC and 10way traveling wave divider/Combiner with proposed structure what have showed that 45.2dBm output power, 16dB gain, PAE 26 % and 17dBc@44dBm IMD3 characteristics. This combine/divider structure can be used when multistage passive divider and combiner needs. especially, power amplifier with very compact size.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• 제21권4호
• /
• pp.417-426
• /
• 2010

This paper describes the 6-way power divider to be used as a feeding structure of the waveguide array antenna generating the plane wave at the near distance. The SMA connector has been connected at the center of the power divider in order to feed the radiating element. The six output ports made of waveguide are positioned on the peripheral of the divider. This paper proposes the method utilizing the inductive post in order to decrease the return loss. The height of the feeding pin, the diameter of the inductive post, and the distance between the feeding pin and inductive post have been investigated, and as a result, the power divider has been optimized. The simulated and measured results show the low return loss of about -40 dB. The calculated and measured transmission coefficients are -7.78 dB and -8.06 dB, respectively. The output power of the six waveguide port show equal-amplitude and equal-phase distribution. Since the power divider proposed in this paper can be expanded to the divider having several output ports, it could be easily applied to the various array antennas.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제27권5C호
• /
• pp.506-511
• /
• 2002

In this paper, waveguide-based power combiner using conventional slotline-to-microstrip transition was proposed at Ka-band. The proposed 2-way and 4-way power combiner consist of waveguide-to-slotline transition, two or four slotline-to-microstrip transitions, and impedance matching networks. Their structures were simulated and optimized by 3-D FEM simulation. The 2-way power combiner showed a very low back-to-back insertion loss of 1.0 dB and return loss better than 15 dB from 25.7 GHz to 29.8 GHz except the resonant frequency. The 2-way power combining approach was extended to 4-way power combining using slotline tee junction. The 4-way power combiner showed the similar performance to that of 2-way power combiner with 2 GHz smaller bandwidth.

• Proceedings of the KIPE Conference
• /
• 전력전자학회 2014년도 전력전자학술대회 논문집
• /
• pp.257-258
• /
• 2014

본 논문에서는 직류 마이크로그리드 시스템에서의 분산 에너지 저장장치 시스템을 위한 제어 알고리즘을 제안한다. 각 에너지 저장장치의 전력 분배를 위해 state of charge (SOC)와 배터리 노화에 따른 용량 변화를 고려한 적응 드룹 제어 방식을 제안한다. 각 에너지 저장장치의 SOC에 따라 오프셋 전압을 변화시킴으로써 각 에너지 저장장치 간의 SOC 밸런싱을 유지한다. 또한, 에너지 저장장치의 용량 변화에 따라 드룹 기울기 변수를 변화시켜, 노화에 따른 전력 분배를 유지하도록 한다. 48V 직류배전 시스템의 시뮬레이션을 통해 제안된 제어방법을 검증한다.