• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2008.10a
• /
• pp.127-128
• /
• 2008

This paper presents development of 3-drive type Jigger dyeing machine. The study has focused on three driving control system and effects of spray nozzle conditions for increase the dyeing efficiency. The results shows that under the 1:2 bath ratio, the washfastness is $4{\sim}5$ grade.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.238-241
• /
• 2006

For the effective reduction of structural vibration level it is important to obtain the exciting force components. But, sometimes direct force measurement is infeasible due to the geometric limitation of sensor placement. In this case, indirect force identification becomes useful tool for obtaining input force information. In this paper, indirect force technique was applied to air-jet weaving machine and shows some numerical results.

• Journal of Korean Library and Information Science Society
• /
• v.50 no.4
• /
• pp.181-201
• /
• 2019

The purpose of this study is to analyze the present state of the enriched contents of OPACs of public libraries in Korea. Examined are the OPACs of 125 public libraries which hold Jeon Du-hwan Hoegorok, and 260 public libraries which hold Banil Jongjokjuui retrieved from KOLIS-NET of the National Library of Korea from Sept. through Oct. 2019. The enriched contents of these controversial books are mostly provided by Naver, Daum, and Aladin Internet Bookstore, and their so-called summaries, reviews, etc. are actually only excerpts supplied by publishers. They are given only as a link to external sources or the whole or partial display in a bibliographic record. Since these enriched contents contain only publishers' promotional statements, but not any objective and professional review, they are not much useful for library users. Therefore, more active participation of librarians in creating or evaluating the enriched contents are proposed, especially for such controversial books.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.04a
• /
• pp.139-142
• /
• 2003

레피어 직기는 1,000rpm 이상의 워터제트와 에어제트 직기의 생산성에 미치지는 못하지만 제직 범위가 넓고 다양한 색사 사용이 가능하다는 장점으로 인해 고급직물을 생산하기 위해 오늘날에도 폭넓게 사용되고 있다. 현재는 외국 선진국뿐만 아니라 국내에서도 레피어직기는 제트직기와 더불어 주력개발기종 중의 하나이다. 근래 레피어직기의 개발방향은 고속화에 주력하고 있다. 레피어를 고속화하기 위한 시도는 위입구동부, 바디침기구, 개구부, 송출부 및 권취부 등 전반적으로 검토되어야 하지만 본 연구에서는 바디침기구의 고속화를 위해 바디침기구의 구동원이 되는 구동캠의 성능향상에 목적을 두고 수행되었다. (중략)

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.162-163
• /
• 2009

본 연구에서는 초음파 진동자를 적용한 초극세사 자동 절단 시스템을 개발 하였다. 초극세사 자동 절단 시스템은 공진 주파수 28kHz를 가지는 초음파 진동자, 구동회로부, 원단 이송장치, 초음파 진동자 이송장치, 초극세사 원단과 에어실린더 사이의 정전기 발생을 방지하기 위한 정전기 제거장치, 구동모터, 및 절단 크기와 절단 속도 등을 조절하기 위한 전기제어 판넬로 구성하여 제작하였다. 또한, 개발한 절단 시스템을 이용하여 초극세사 클리너 시제품을 제작하여 절단면을 전자현미경으로 관찰하였고, 절단 시스템의 소음진동 특성을 평가하였다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.254-257
• /
• 2005

Locations and emission characteristics of noise source of rapier loom are important factors greatly. So, noise characteristics of rapier loom were investigated by the noise source identification as a part of experimental methods in this study. To identify the noise sources of the rapier loom sound intensity was measured under machine operation. In addition, frequency spectra of the sound at operator position was measured along with sound intensity to help identify the noise characteristics of the rapier loom. The results indicate that the sound power level occurs along the rapier loom.

• The Science & Technology
• /
• v.35 no.8 s.399
• /
• pp.43-66
• /
• 2002

[통치자의 과학기술 리더십] 정책조정자형 과학기술 리더십 전환시급, 체계적 보좌기초 목표달성체제 구축해야/ [국내 역대대통령의 과학기술 정책] 박정희대통령 과학기술 초석놓고 전두환 이어 김대중대통령 변화기 진입/[외국 역대대통치자의 과학기술 정책/미국] 역대 대통령 '과학기술은 국력' 인식, 레이건은 '스타워즈'로 소련붕괴 불러와/[외국 역대대통치자의 과학기술 정책/일본] 역대 총리 6명이 과학기술청 장관 출신, '나카소네수상' 원자력 선진국 기틀 마련/[외국 역대대통치자의 과학기술 정책/중국]'모택동' 국방기술 개발에 총력 핵탄 완성, '등소평' 과학기술은 제일의 생산력 강조/[외국 역대대통치자의 과학기술 정책/영ㆍ독ㆍ불ㆍ러]프랑스 - 과학기술 선진국 나폴레옹과 드골 초석, 러시아 - 레닌 이후 모든 통치자 科技 위해 정책 펴

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.535-539
• /
• 2001

In these days. the finite element method(FEM) is a very common method for not only a simple vibration analysis but also the optimization of structures. Since the finite element model may contain thousands of degree of freedom, the eigensolutions require extreme computing power, which will result in a serious time-consuming problem. Thus, many researchers have challenged to find more improved modeling techniques and calculating methods to overcome such problems. The Guyan reduction method and the substructure synthesis method are typical examples of such methods. Of the substructure synthesis method, the component mode synthesis method (CMS) is widely used for dynamic analysis of structure. In this study. for the efficient analysis of jet loom structure. Component Mode Synthesis was carried out. The results of the finite element program developed are compared with those of the commercial package program ANSYS for the validation of the program. The results obtained by the program showed a good agreement with those of ANSYS. The program will be further refined and verified by test to yield more accurate results.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2008.10a
• /
• pp.129-130
• /
• 2008

텐터의 성능을 결정하는 요인은 여러 가지가 있으나, 섬유의 종류 또는 가공 공정의 목적에 따라 적절한 건조속도 및 효율성, 원단의 전 폭에 걸친 건조 균일도, 습윤 공기의 자동 배출, 원단의 장력 및 오버피드, 그리고 각종 자동화 제어 장치의 활용 등으로 구분되어 질 수 있으며, 그러므로 텐터기 챔버 내부의 공간구조에 따른 비효율적 유로형상과 공기 분사노즐 정확한 압력 및 온도분포에 대한 현장 기초자료를 확보하여 텐터의 에너지 절약 및 건조 원단의 품질을 향상시킬 수 있는 구조의 설계가 요구된다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1461-1466
• /
• 2000

This paper investigates the noise reduction scheme in tractor cabin by using various steps of experiment. The experiments were performed in the field as well as in the lab to facilitate the detail test procedure. Some of the test results were compared with computational results. Several noise sources and paths were identified including the engine compartment (cooling fan and timing gear cover), hydraulic system and its components (hoses, tubes and there mount) and structural characteristics of the cab, window, mounting bracket and machine frame including steps. Throughout the several design changes, cab noise level was reduced from 80.2dBA to 74.8dBA.