• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1994.10a
• /
• pp.210-216
• /
• 1994

본 연구에서는 볼 베어링의 전동체 회전에 의해 발생하는 원심력, 자이로스코픽 모멘트, 하중 방향선에 대한 전동체의 하중 분포 변화 등을 고려하여, 볼 베어링의 강성 특성을 해석하고, 볼 베어링으로 지지되는 간단한 회전축 계에 해석 결과를 적용하여 진동 특성을 해석하고자 한다.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.11
• /
• pp.243-247
• /
• 1999

Carbon nitride coatings on the substrates of 0.55wt% C - 1.68wt% Mn induction-hardened rolling elements were prepared by ion beam assisted deposition. It was found through metallographic observation that the carbon nitride coatings appeared lamellar-type repeated layers parallel to the surface of substrate. Surface roughness of the coated specimens was improved in comparison with that of the substrates. Wear resistance of the coatings was evaluated using Polymet RCF-1 machine with a constant supply of lubricant followed by Weibull statistical analysis and scanning electron microscopy. the results indicated failure due to old-age wear-out of the coatings was mainly caused by numerous micropits formed on the wear track during repeated rolling contact.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2000.05a
• /
• pp.245-246
• /
• 2000

콩과식물인 전동싸리를 대상으로 통제된 조건하에서 Al과 Co처리에 따른 식물체의 생장반응과 식물체내 중금속의 축적정도 및 근류의 질소고정 활성의 변화를 조사한 결과 중금속은 Co가 Al보다 높게 축적되었고, 처리 초기에는 지하부를, 장기간 처리시는 광합성 기관의 생장을 억제했는데, Co 처리는 영향이 미약하였으나, Al처리구는 다소 심각한 영향을 주었으며, 생장에 비해 질소고정계의 피해가 현저하였다. 전동싸리는 흡수된 중금속을 뿌리수준에서 조절함으로써 광합성기관으로 이동을 억제하는 중금속에 대한 생장적응을 나타내었다. 결국 전동싸리는 30ppm의 중금속 처리시 뿌리 수준에서 조절함으로써 광합성기관으로 전이를 차단하여 금속에 대한 내성 나타내었고, Al이 Co보다 심각한 영향을 미치는 것으로 나타났다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.7
• /
• pp.755-762
• /
• 2004

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.877-878
• /
• 2011

• Journal of Korean Society of Steel Construction
• /
• v.12 no.2 s.45
• /
• pp.177-185
• /
• 2000

An experimental research to evaluate the slip coefficients of high-strength friction-type bolt connection of weathering steel plate has been performed in this paper. The test specimens with mill scale or shot blast had been exposed in open air during 3 and 6 months and cleaning of rust surface by hand brushing, power tool brushing and no cleaning was considered. The relaxation of bolt clamping force had also been measured during 600 hours. It was found that slip coefficients increased to the value over 0.6 with exposure except mill scale surface by power tool brushing. The relaxation of bolt tension force in exposed specimens also increased and maximum value reached to about 10%.

• 대한방사선방어학회:학술대회논문집
• /
• 2011.04a
• /
• pp.20-21
• /
• 2011

• Tribology and Lubricants
• /
• v.7 no.1
• /
• pp.7-15
• /
• 1991

각종 회전기계류의 고속화, 고온화 추세로 고속, 고온에 사용될 수 있는 베어링 개발이 요구되고 있다. 그러나, 기존에 많이 사용되어 오던 steel 베어링은 고온에서의 강도 저하 및 고속에의 전동체의 원심력 증가에 의한 급격한 피로수명의 감소 등으로 인해 사용이 불가능하게 된다. 고속화를 위해서 저밀도의 재질이 필요하며, 고온화를 위해서는 고온강도가 뛰어난 재질이 필요하다. 최근 개발되고 있는 기계구조용 세라믹은 이 두 가지 특성을 모두 지닌 재질로서 베어리에의 응용이 시도되고 있다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.26 no.6
• /
• pp.43-52
• /
• 2022

Operational reliability of the single-use turbo engine for guided weapons must be guaranteed even after long-term storage. Rolling element bearings have a great influence on the operational reliability of the turbo engine, however changes in micro dimensions of bearings by an oxide layers on rolling elements and raceways may cause failures after long-term storage. In this study, changes in dimensions of bearings were measured and roughness of rolling elements was used for estimating the storage life. Storage life estimation was performed via two kinds of methods, Weibayes method and random sample generation method. The results of two methods were compared and their characteristics were analyzed. This study will contribute to establish an efficient maintenance schedule for the single-use turbo engine.

• The Journal of the Korea Contents Association
• /
• v.10 no.6
• /
• pp.364-372
• /
• 2010

The aim of this study was to evaluate effects of EEG patterns induced by three types ((1) resting mode(control group), (2) light massage mode, (3) strong massage mode in the electrical chair-massager for 15 minutes) in a sample of 16 healthy adults. Changes in anxiety and stress were assessed, and electroencephalogram was recorded. Anxiety scores(STAI: State Anxiety Inventory, VAS: Visual Analog Scale) decreased in all groups. For anxiety scores, the strong massage group showed the greatest decrease in stress. All groups also showed an increase in delta and theta activity, but only strong massage group showed a signigicant difference. All groups showed a decrease in alpha activity. Also, EEG changes in two groups except a control group showed a decrease in beta activity.