• Journal of IKEEE
• /
• v.9 no.1 s.16
• /
• pp.19-30
• /
• 2005

Packet classification is defined as the action to match the packet with a set of predefined rules. One of classification is to use Ternary Content Addressable Memory hardware search engine that has faster than other algorithmic methods. However, TCAM has some limitations. One of them is that TCAM can not perform range matching efficiently. A range has to be expanded into prefixes to fit the boundary. In general, the number of expansion could be up to 2w-2, where w is the width of the field. For example, if two range fields with 16 bits are used, there could be up to $30\;{\times}\;30\;=\;900$ expansions for a single rule. In this paper, we describe the novel algorithm for converting range matching rules into TCAM entry efficiently. The number of maximum entry is 2w-4 when using the algorithm. Furthermore, it has also benefit about the negation range. In the result of experimentation, the new scheme practically reduces 14 percent in case that searched fields are source port and destination port number.

• Resources Recycling
• /
• v.22 no.1
• /
• pp.36-41
• /
• 2013

LF slag is formed by EAF carryover slag and slag former(such as lime, dolomite) put into the ladle during the tapping molten metal. After LF process, continuous casting is started when molten steel is sent from ladle to tundish through bottom nozzle of ladle. Conventionally, remained molten slag and steel in ladle are poured into a slag port and they are transferred to a slag yard and then recycled. In this study, we investigated about recycling of molten LF slag residue(including Fe residue to reuse) which is made in steelmaking process. As a result, lime usage was decreased about 2.2~3.2 kg/steel-ton and also molten steel yield rate was increased about 0.3 ~ 0.5 percent point.

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.36T no.3
• /
• pp.79-84
• /
• 1999

The existing EMTP(Electromagnetic Transients Program) is writted by FORTRAN-77, has a closed architecture and uses a large number of code lines to satisfy requirements ranging from low level data manipulation to the actual solution mathematics which eventually become diluted and almost impossible to visualize. Thus has a difficulty in the development and maintenenace of its program module. This paper proposes a new design idea suitable (or a re-development of EMTP using the MATLAB and VISUAL-C++, which presents the development of the new EMTP package is operated in the window environment. The package has the GUI(Graphic User Interface) ability, and the MATLAB computation engine for an analysis of a transient state in an electric circuit.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2003.11a
• /
• pp.455-458
• /
• 2003

네트워크 사용자의 급속한 증가로 네트워크 내의 부하를 감당하기에는 많은 어려움을 가져왔다. 이와 같은 이유로 기존의 TCP/IP 에서 세션을 통하여 노드들 간의 통신을 연결하는 방식에서 현재는 하나의 채널을 통해 고속의 I/O 가 가능하도록 하는 기술의 많이 연구되고 있다. 그 대표적인 것으로 인피니밴드가 있다. 인피니밴드는 프로세싱 노드와 입출력 장치 사이의 통신, 프로세스간 통신에 대한 산업 표준이 되고 있고 프로세싱 노드와 입출력 장치를 연결하기 위해 스위치 기반의 상호 연결은 전통적인 버스 입출력을 대체하는 새로운 입출력 방식을 사용한다. 또한 인피니밴드는 서버 시스템에서 요구하는 여러 특징 중에서 어플리케이션에게 QoS (Quality of Service)을 보장할 수 있는 메커니즘을 포함하고 있다. 본 논문에서는 어플리케이션에서 요구하는 각 트레픽의 요구 대역폭 크기에 따라 구분하여 효율적인 중재 테이블의 구성을 통해 데이터 전송에 있어 QoS 에 합당하게 출력포트를 통해 나갈 수 있도록 중재 테이블을 관리하는 기법을 제안하고 이를 NS-2 (Network Simulator)을 이용하여 성능 평가를 했다. 특히 기존 인피니밴드에서의 중재 테이블을 이용한 패킷 처리량과 본 논문에서 제안한 중재 테이블 구성 방식을 이용한 패킷 처리량을 비교했으며 성능평가 결과는 기존의 인피니밴드에서의 패킷 처리량에 비해 약 19% 향상된 결과를 나타냈다.

• Korean Journal of Optics and Photonics
• /
• v.7 no.4
• /
• pp.414-418
• /
• 1996

An electro-optic polymer digital optical switch was fabricated by using a photobleached waveguide and a self-aligned electrode. It features wavelength insensitive operation, fabrication tolerance and flexible design. And its possible advantages include low coupling losses to the fibers and wide bandwidths. For improving its switching performance, the guided mode profiles of the photobleached waveguides were controlled by photobleaching times to achieve optimized coupling in the branch. And the self-aligned electrode was employed to achieve both efficient overlap of the optical and electric fields and easy introduction of the adiabatically tapered electrodes. The measured crosstalks were better than -21dB at 1.32 ${\mu}{\textrm}{m}$ and 1.55 ${\mu}{\textrm}{m}$, and the extinction ratios of each output port were also more than 20 dB.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.1
• /
• pp.125-135
• /
• 2001

A 8$\times$4 microstrip antenna array is designed at 5.3 GHz and its characteristics are investigated with respect to the application in dual polarized synthetic aperture radars. The design is focused on the achievement of a wide bandwidth, a high polarization purity, a low loss, a good isolation and some mechanical requirements suitable for the application. The antenna is fed by a -3 dB tapered feed network, and is composed of dual polarized SSFIP (Strip-Slot-Foam-Inverted Patch) elements with honeycomb and shielding plane. Simulation results for the antenna array are presented and compared with measurements. It is observed that the antenna shows a bandwidth of 80 MHz, a polarization isolation better than 20 dB, an isolation of 40 dB, and good mechanical characteristics.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.2005-2006
• /
• 2011

Due to the advantages of small sizes, more I/O ports, etc., Ball Grid Array (BGA) has been used in the production of printed circuit board (PCB). However, BGA voids can degrade the performance of the board and cause failure. To automatically detect the voids in X-ray image, a novel blob filter that makes use of the local image gradient magnitude is proposed in this paper. The utilization of the local image gradient magnitude makes the proposed filter invariant to the image brightness, void shape, void position, and component interference. Furthermore, different sizes of box filters are employed to analyze the image in multi-scale, and as a result, the proposed blob filter is robust to void size. Experimental results show that the proposed method can obtain void detection accuracy up to 96.104% while keep low false ratio.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.10
• /
• pp.29-35
• /
• 2009

This paper handles, implementation of multiple access bidirectional serial communications protocol using DC power lines. The normal voltage of the power communication line maintains 24[V] corresponding to level 1 and the host drops the voltage to 12[V] on sending level 0 signal, also the clients normally keeps the line voltage to 24[V] use pull-down circuit to drop the voltage to 12[V] on sending level 1 signal. Host senses the voltage level of the power communication lines and the hosts switches power source from 24[V] to 12[V]. Experimental circuit is designed with one hosts and four clients and verified the power line voltage switching operation depending on the data signal levels on the power line.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.8
• /
• pp.709-716
• /
• 2016

In this paper, A duplexer module with temperature-insensitive electrical characteristics was proposed for remote wireless communication system. Duplexer modules are required to have performances of low insertion loss, high isolation between transmitted band and received band, harmonic suppression as well as high power durability in the system for transmitting guided information to missile flying a free space on the ground. The proposed duplexer module are consist of transmission bandpass filter and receiving bandpass filter which are connected to common antenna port, planar coupler for output power monitoring and low pass filter for harmonic attenuation of power amplifier and coaxial cavity resonator. The material and dimensions of the resonator are determined for minimum frequency shift by temperature variation using 3D EM simulation. The measured results of the prototype showed a good agreement with the simulation results, and it should be well applied not only for guided weapon systems but also for any other communication systems such as remote radio head.

• Journal of IKEEE
• /
• v.14 no.1
• /
• pp.33-39
• /
• 2010

In this paper, a 5Gb/s receiver with an adaptive equalizer for serial link interfaces is proposed. For effective gain control, a least-mean-square (LMS) algorithm was implemented with two internal signals of slicers instead of output node of an equalizing filter. The scheme does not affect on a bandwidth of the equalizing filter. It also can be implemented without passive filter and it saves chip area and power consumption since two internal signals of slicers have a similar DC magnitude. The proposed adaptive equalizer can compensate up to 25dB and operate in various environments, which are 15m shield-twisted pair (STP) cable for DisplayPort and FR-4 traces for backplane. This work is implemented in $0.18-{\mu}m$ 1-poly 4-metal CMOS technology and occupies $200{\times}300{\mu}m^2$. Measurement results show only 6mW small power consumption and 2Gbps operating range with fabricated chip. The equalizer is expected to satisfy up to 5Gbps operating range if stable varactor(RF) is supported by foundry process.