• Aerospace Engineering and Technology
• /
• v.4 no.1
• /
• pp.162-170
• /
• 2005

In KSLV-I, actuation system for thrust vector control of kick motor was configured as electro-hydraulic servo actuation system and consisted of actuators, hydraulic power supply system, hydraulic power distribution system and control system. In case of hydraulic power supply system, we use EMDP(Electric Motor Driven Pump) to supply hydraulic power. Generally, we use brushed DC motor for EMDP but it is not easy to operate EMDP using brushed DC motor at a high altitude. Hence, we are developing EMDP using brushless DC motor to use at a high altitude. In this study, we will explain control system for BLDC motor to drive hydraulic pump.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.3
• /
• pp.211-216
• /
• 2015

Large hydraulic excavator weighted 90 tons used the several pumps installed in parallel to use the hydraulic pump driving gearbox to improve fuel consumption by improving the energy efficiency of the hydraulic system. Gearbox connected to hydraulic pump supply the mechanical output to the high pressure and low pressure pump to be supplied by torque and rotation, which are the mechanical power, through a input shaft connected to large size engine of the excavator. So, gearbox connected to hydraulic pump is same as main artery in the human body and is required long life because it operates the hydraulic pump continuously during operating the engine. This study had used oil contamination analysis method to check the wear characteristics of the gearbox and frequency response characteristic analysis method to check the failure of the teeth failures of gearbox, while the test equipment adopted by the electrical feedback method to reduce the energy consumption was operating for the life assessment, in which the required power was 600 kW input power.

• Journal of Power System Engineering
• /
• v.15 no.6
• /
• pp.86-94
• /
• 2011

In this paper, an electro hydraulic power steering system based on electro hydrostatic actuator (EHA) is proposed. A detailed steering model for the proposed electro hydraulic power steering system including mechanical and hydraulic subsystems is established. A conventional electro hydraulic power steering system is also modeled to evaluate the performance of the proposed power steering system such as responsiveness, assist force, command tracking and steering feel by computer simulation. From the computer simulation results, it is found that the proposed power steering system based on EHA has desirable performance.

• Aerospace Engineering and Technology
• /
• v.6 no.2
• /
• pp.164-170
• /
• 2007

In this paper, the development results of electromechanical TVC actuation system is described in the aspect of design, analysis, manufacturing and test. The kinds of prime power for TVC actuation system is classified by the variety of propulsion system of launch vehicle. The electric power by battery is the sole candidate for prime power of TVC actuation system at the view point of feasible domestic infra technologies for the present. The characteristic analysis study is performed between electromechanical and electrohydraulic actuation system with respect to power efficiency, performance and weight efficiency. The electromechanical actuation system has superiority of power and weight efficiency according to less opportunity of power conversion process.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.2
• /
• pp.195-201
• /
• 2015

An electric excavator consumes battery energy to drive an electric motor attached to a hydraulic pump to generate hydraulic power. In a conventional hydraulic excavator, the hydraulic pump is controlled by regulators, which are used to optimize the diesel engine efficiency. Because of a lack of battery energy capacity, an electric excavator controller should consider not only the electric motor efficiency but also the hydraulic pump efficiency. Thus, electric motor and hydraulic pump efficiency maps were constructed. An optimal operating map (OOM) was created based on the most efficient operating points under each input condition. An integrated control algorithm controlled the speed of the electric motor and displacement of the hydraulic pump according to the OOM. To confirm the utility of this algorithm, a model-in-the-loop simulator for the algorithm with an electric excavator was established. The simulation results showed that the integrated control algorithm improved the energy efficiency of an electric excavator.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.2869-2871
• /
• 1999

본 연구는 포항제철 STS 냉연공장의 형상 제어에 관한 것이다 당사의 냉간 압연기는 Sendzimir mill로서 상하 롤(Roll)이 10단씩 구성된 20단 압연기이다. 본 압연기에 의한 575 냉연강판의 형상제어는 현재 조업자의 수동운전으로 구동되고 있으며 구동기는 AS_U Roll 8 개와 Intermediate Roll 2 개의 10 개로 구성되어 있다. 구동기의 특성은 solenoid 형태와 유압식으로서 응답성이 빠르지 뭇하다. 본 연구는 위와 같은 특성을 지닌 냉간 압연기를 가지고 퍼지 제어에 의한 자동제어의 구현에 관한 것이다. 본 연구에 사용된 퍼지 제어기는 형상 강판의 두께 Roll 속도, AS_U Roll과 IMR의 현 위치 강종 강판의 폭, 강판의 장력 등의 입력을 고려하여 제어기의 출력인 AS_U Roll 8 개의 위치 값과 IMR 2 개의 위치 값을 결정한다. 현재 실 프로세서에 적용중이며 형상제어 정도가 양호하다. 본 연구의 효과는 형상제어의 자동화 및 형상 정도 향상을 통한 조업 안정화에 있다.

• Journal of Aerospace System Engineering
• /
• v.16 no.6
• /
• pp.129-137
• /
• 2022

Recently, the technology of aircraft drivers has been transitioning from the existing hydraulically-focused mechanical system to an all-electric one due to the high precision and ease of maintenance of electric drivers. Consequently, the failure of an aircraft's electric motor can have fatal consequences. To ensure aircraft safety, efficient and timely fault diagnosis methods are required prompting the active pursuit of research into fault diagnosis technology. This paper introduces and analyses the failure types and failure diagnosis technology trends of permanent magnet synchronous motors among electric motors.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.4
• /
• pp.349-357
• /
• 2017

If an actuation system of the tactical missile is required very fast response time on conditions of short operating time and big loads on the actuator, we would prefer to adopt a small hydraulic system. In this paper, a mathematical model is proposed to analyze and simulate the small hydraulic actuation system. The mathematical model consists of a high pressure vessel model, a pressure regulator model, a hydraulic reservoir model and a actuator model. The suggested model is validated by comparison of simulation results with experimental data. The simulation results show that the mathematical model could be useful for designing a hydraulic actuation system.

• Journal of Drive and Control
• /
• v.6 no.1
• /
• pp.29-37
• /
• 2009

• Proceedings of the KOSOMBE Conference
• /
• v.1995 no.11
• /
• pp.211-215
• /
• 1995

전기유압식 좌심실 보조장치에서 모터 전류 파형을 정보로 하여 작동기의 이완기 속도를 조절함으로써 좌심방으로부터 유입되는 혈류량을 조절하는 알고리즘을 개발하였다. 전기 유압식 좌심실 보조장치에서는 혈액의 유입이 능동적으로 이루어지므로, 좌심방 함몰로 인한 심근 손상 및 외부 공기 유입으로 인한 색전증을 방지하기 위해 유입혈류량을 현재 좌심방 내의 상태에 따라 적절히 조절해 주어야 한다. 좌심방 내의 혈액량 정도는 혈액을 유입해내는 작동기의 이완기 동작 시에 소모되는 에너지 크기에 반영되고, 작동기를 구동하는 모터에 들어가는 전류의 크기는 작동기에 공급되는 에너지에 비례하므로, 이 전류 파형의 정보들을 통해 좌심방 내의 상태를 추정해 볼 수 있다. 본 논문에서는 퍼지로직을 적용하여 모터 전류 파형의 이상 유무를 판단한 뒤 이에 따라 작동기의 이완기 속도를 조절하는 알고리즘을 개발하여 모의순환장치 실험을 통해 그 실효성을 검증한 결과를 정리하였다.