• Title/Summary/Keyword: 전극 전위

Search Result 578, Processing Time 0.032 seconds

Fabrication of Ultramicroelectrodes with Nanoporous Gold Structures by Potentiostatic Anodization (정전위 양극 산화에 의한 나노다공성 금 구조의 초미세 전극 제작)

  • Seoin, Shin;Siyeon, Lee;Jongwon, Kim
    • Journal of the Korean Chemical Society
    • /
    • v.66 no.6
    • /
    • pp.436-441
    • /
    • 2022
  • Because the nanoporous electrodes has large electrochemical surface areas, extensive studies have been focused on their fabrication methods. In this paper, a method for introducing a nanoporous gold (NPG) structure on the surface of an ultramicroelectrode (UME) using potentiostatic anodization was investigated. A well-defined NPG structure was introduced on the surface of the UME when a potential of 1.3 V was applied in 0.1 M phosphate buffer solution (pH 8) containing 1 M KCl. The anodic oxidation efficiency was investigated by observing the effect of the applied potential, the reaction time, and the size of the electrode on the roughness factor (Rf) of the prepared NPG-UMEs. In a short time of about 10 minutes, NPG-UME with a large Rf value of about 2000 could be prepared, which could be effectively used for electrochemical glucose detection. The results shown in this work are expected to have great applicability when performing electrochemical analysis with a small sample volume.

A Study on the Measuring the Grounding Resistance Using the Leakage Current in the Ground Conductor (접지선 누설전류를 이용한 접지저항 측정에 관한 연구)

  • Kang Moon Ho
    • Proceedings of the KIEE Conference
    • /
    • summer
    • /
    • pp.515-517
    • /
    • 2004
  • 현재 배전선로는 4가지 접지종별을 준용하여 피뢰기, 가공지선, 변압기, 기기류, 중성선 둥을 접지시공하고 있다. 또한 규정된 접지저항값에 따라 접지전극을 시공하고 2년에 1회 주기적으로 접지저항값을 측정하고 관리하고 있다. 현재 접지저항값의 측정에는 휴대가 간편하고 측정이 용이한 HOOK-ON 접지저항계가 주로 이용되고 있다. 그러나 HOOK-ON 접지저항계는 $\pm$5[\%]$정도의 측정오차 뿐만 아니라 측정선 전류가 1[A]를 초과하는 경우 변류용 철심이 포화되어 측정이 어렵다는 단점을 가지고 있다. 따라서 본 논문에서는 HOOK-ON 측정기법의 단점을 보완하여 다중접지 배전계통에서 부하 불평형 및 고조파 둥에 의해 발생하는 접지선 누설전류를 전류원으로 이용하는 접지전극의 접지저항을 측정하는 새로운 측정기법을 제안하였다. 또한 이를 실제 배전계통에 적용하여 전위강하법을 이용하여 측정한 접지저항값과 비교하였다.

  • PDF

Comparison between a differential and a non-differential amplifier system with two electrodes in bio-potential measurement (생체 전위 측정에서 2-전극 차동 증폭 시스템과 2-전극 비차동 증폭 시스템의 비교)

  • Kang, Dae-Hun;Lee, Chung-Keun;Lee, Sang-Joon;Lee, Myoung-Ho
    • Proceedings of the KIEE Conference
    • /
    • 2008.07a
    • /
    • pp.1977-1978
    • /
    • 2008
  • In this paper, we compare performance of common-mode rejection between a differential and a non-differential amplifier system with two electrodes. A differential amplifier system is constant for common-mode rejection ratio(CMRR) on the frequency domain. But a non-differential amplifier's CMRR is determined by $Z_{FB}/Z_e$ ($Z_{FB}$ ; feedback impedance, $Z_e$; electrode impedance). There is trade-off between a non-differential amplifier's CMRR and its differential input impedance. And a non-differential amplifier system has some advantages for a bio-potential measurement with two electrodes because a designer can control the impedance between the body and system's common.

  • PDF

다성분 금속염의 용융염 전해분리 해석

  • Kim, Gwang-Rak;An, Do-Hui;Baek, Seung-U;Gwon, Sang-Un;Kim, Si-Hyeong;Sim, Jun-Bo;Jeong, Heung-Seok;Kim, Eung-Ho
    • Proceedings of the Korean Radioactive Waste Society Conference
    • /
    • 2007.11a
    • /
    • pp.289-290
    • /
    • 2007
  • 본 연구에서 제시된 모델을 기반으로 KCl-LiCl/Cd의 전해제련 시스템 해석을 통하여 다성분 금속염의 전해 분리의 기본 특성을 이해할 수 있었으며, 주어진 정전류 전해제련 모사에서 전해거동을 예측할 수 있었다. 또한 시간에 따른 용융염 전극반응에 참여하는 각 원소들의 전류 및 전극반응에 가해지는 전위를 예측할 수 있는 모델로써 전해장치의 설계 및 운전시 전해 변수들이 전해성능에 미치는 영향을 판단하는데 유용하게 활용될 것이 기대된다.

  • PDF

A Study on the Delay-Time of DC Discharge in the Plasma Display Panel (플라즈마 디스플레이 패널의 직류방전 지연시간에 관한 연구)

  • Ryeom, Jeong-Duk;Kwak, Hee-Ro
    • Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
    • /
    • 2006.05a
    • /
    • pp.200-204
    • /
    • 2006
  • 본 연구에서는 새로 고안된 NOT-AND 논리에 의한 방전 논리 gate PDP의 입력 DC 방전특성에 대해 고찰하고 동작특성을 해석하였다. 새로 고안된 방전 AND gate는 방전 경로에 따른 전극사이의 전위차의 변화로 AND 출력을 유도한다. 이러한 방전 논리 소자를 가지는 PDP에서는 직류방전이 논리게이트의 역할을 한다. 실험결과 이 DC 입력방전을 위해 priming 방전을 인가한 경우가 인가하지 않은 경우에 비해 방전지연시간이 1/3로 단축되며 방전개시전압은 1/2로 감소하였다. 또한 이 priming 방전은 방전종료후 $30{\mu}s$ 정도까지 영향을 미친다. 그리고 이 직류방전의 시간적, 위치적 방전특성을 측정한 결과, 방전에 따른 시간적 거리의 변화는 상당한 영향을 미치나 인접 전극들의 위치적인 영향은 거의 미미하다는 결론을 얻었다.

  • PDF

The Potential Interference between Ground Rod and Counterpoise (봉상 접지전극-수평매설 접지전극 상호간의 전위간섭)

  • Lee, Bok-Hee;Lee, Su-Bong;Jeong, Dong-Cheol
    • Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
    • /
    • 2006.05a
    • /
    • pp.351-354
    • /
    • 2006
  • This paper deals with the potential interferences between ground rod and counterpoise. The ground potential rise and coefficient of potential interference were measured by using the hemispherical water tank grounding simulator and calculated from CDEGS program as functions of the configuration and size of grounding electrodes and the distance between grounding electrodes. The ground potential un and potential interference coefficient strongly depend on the distance between grounding electrodes, the arrangement and size of grounding electrodes.

  • PDF

The nagative carbon electrode properties of hybrid carbon for lithium ion batteries (리튬이온전지용 하이브리드형 탄소의 탄소부극 특성)

  • Yang, Dong-Bok;Park, Yong-Pil
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2004.07b
    • /
    • pp.1199-1202
    • /
    • 2004
  • 리튬이온전지 음극활질용으로 Hybrid of pitch based graphite impregnating natural graphite와 Hybrid of pitch based carbon impregnating natural graphite로 탄소전극을 제작하여 전기화학적인 특성을 연구하였다. Natural graphite에 pitch based graphite나 pitch based carbon의 혼합은 흑연의 이론용량인 372 mAh/g를 초과하는 고용량을 나타내었다. 이것은 극소공동에 리튬종의 삽입과 탈삽입에 의한 것으로 파악된다. 그러나 충 방전이 계속 진행되면서 방전용량이 급격히 저하되는 현상이 관찰되었다. X-선 회절분석 결과로부터 Hybrid of pitch based carbon impregnating natural graphite 탄소전극에는 amorphous carbon이 상대적으로 다량 존재한다는 것을 확인하였고, 이는 리튬의 삽입된 상태의 전위에 분포가 있어 충 방전시에 완만한 전압의 구배를 만들며, 비가역용량을 증가시키는 요인으로 파악되었다.

  • PDF

접지 시스템 계획(마지막회)

  • Lee, Seong-U;Kim, Jin-Gon
    • Electric Engineers Magazine
    • /
    • v.264 no.8
    • /
    • pp.14-21
    • /
    • 2004
  • 접지 시스템의 계획은 접지전극 형상의 설계와 계통접지 방식에 따른 접지 시스템으로 구성하여야 하고 접지 또는 급속체간 전위차가 발생하지 않도록 Bonding 기술을 충분히 고려하여야 한다. 그러나 국내의 기술기준 및 내선규정은 이에 대한 규정이 없으며 단지 접지종별 접지저항 값만을 규정하고 있어 실무에서 많은 이견이 발생하고 있고 전력기술인 협회지 2~4월호에서 살펴보았듯이 자동화 되는 생산 Line에서는 피해가 커지고 있다.<중략>

  • PDF

Ground Potential Distribution Associated with the Buried Depth of Ground Rod (봉형 접지전극의 시설깊이에 따른 대지전위분포)

  • Lee, B.H.;Eom, J.H.;Ahn, C.H.
    • Proceedings of the KIEE Conference
    • /
    • 2000.07c
    • /
    • pp.2068-2070
    • /
    • 2000
  • Ground potential rise is a vital part of personal safety, this paper presents the ground potential rise distribution induced by a ground rod. The experiments were conducted with the AC square wave currents according to the buried depth of ground rod. The ground potential is significantly varied in the vicinity of ground rod and the ground potential distribution is flat and few with increasing the buried depth of ground rod.

  • PDF