• Proceedings of the KIEE Conference
• /
• 1988.11a
• /
• pp.363-367
• /
• 1988

A simple analytical model for the lateral channel electric field in gate - offset structured Lightly Doped Drain MOSFET has been developed. The model's results agree well with two dimensional device simulations. Due to its simplicity, our model gives a better understanding of the mechanisms involved in reducing the electric field in the LDD MOSFET. The model shows clearly the dependencies of the lateral channel electric field as function of drain and gate bias conditions and process, design parameters. Advantages of analytical model over costly 2-D device simulations is to identify the effects of various parameters, such as oxide thickness, junction depth, gate / drain bias, the length and doping concentration of the lightly doped region, on the peak electric field that causes hot - electron phenomena, individually. We are able to find the optimum doping concentration of LDD minimizing the peak electric field and hot - electron effects.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.5
• /
• pp.93-99
• /
• 1998

The chirping characteristics of InGaAsP electroabsorption modulatiors have been analyzed. The effective .alpha. parameters for large signal modulation were estimated by comparing the pulse shape after fiber transmission with constant chirping assumption.We investigated the structure and the operating condition of the modulator to improve the chirping characteristics. The .alpha. parameters were calculated as the function of wavelength detuning and the bias voltage. To minimize the chirping performance, high bias voltage and a small wavelength detuning and the bias voltage. To minimize the chirping performance, high bias voltage and a small wavelength detuning were preferred. An negative .alpha. value is achieved at the wavelength detuning below 30meV with a proper bias voltage so that pulse compression effect was expected.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.10 no.2
• /
• pp.1-6
• /
• 1973

Traveling wave laser phase modulator, which is consist of rectangular waveguide paritially loaded with electrooptic material, is analysed theoretically. The propagation characteristics, electric field, attenuation, and modulation index are obtained in terms of normalized parameters. It is shown that high modulation index is achieved with relatively low modulating power. And also design procedure of modulator is described with particulary refererenece to KDP.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.51 no.11
• /
• pp.585-590
• /
• 2002

In this paper, the 3 dimensional surface charge method is applied to calculate electric fields distribution inside a general and an optimal model of GIS with a metal impurity and a void respectively. We know the optimal model can reduce tangential electric fields at solid insulator surface to 70% of the general model and infulence fields distribution near a metal impurity. Meanwhile, we find the optimal model does not decrease field distribution inside a void in the insulator.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.8
• /
• pp.100-107
• /
• 1999

When a subscriber service composed along the central street of urban in microcell and picocell mobile communication of cellular method, we proposed the propagation prediction model that mobile communication environment of urban can analyze exactly and faster men than a precedent. We simulate the proposed propagation prediction model under the urban propagation environment of PCS mobile communication and analyze distribution of received field strength in cell. As a results, we show the optimal condition of the transmitting power and the position of the base station in the microcell and the picocell mobile communication.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.5
• /
• pp.307-311
• /
• 2016

Although there are existing Residual Current Protective Device (RCD) including detect electric leakage and elements such as short circuit and surge, the occurrence of incidents caused by electric faults, including fire, are still constant. The purpose of this study is to analyze the causes of accidents through the electric field distribution in the interpretation of the fault contact breaker. Simulation results by the arc fault has shown the convergence of temperature and electric field to the defect. Through their simulation results, the main cause of erosion phenomena in circuit breaker bar is the electric arc by concentration of electric field not due to dissolve by temperature.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1892-1894
• /
• 1996

This paper presents optimal charge arrangement through potential error analysis. In order to decide the number of charges per conductor for a large system, adaptive simulation charge arrangement technique has been proposed. "Grouping" technique which means to divide analysis domain into two groups has been described through field error analysis. By this method, the size of matrix to calculate E field at a calculation point is reduced remarkably. The proposed method is applied to the electric field calculation around the Substation busbars.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1368-1369
• /
• 2008

This paper describes the electric field distribution analysis along a shield form inner vacuum interrupter(VI). The equipotential line and electric field and field vector in a VI are analysed by a finite element method at various shield form. in result, The equipotential line and electric field distribution was affected to VI shield gap. The reason is as it gets distortion of equipotential line done. finally, this paper recognized whether or not affected, and proposed gap with the most suitable shield length and an external insulation.

• Journal of the Korean Society of Safety
• /
• v.21 no.5 s.77
• /
• pp.34-39
• /
• 2006

In this paper, we investigated the electric field distribution according to the roughness in aramid insulating paper for electric machine. Aramid insulating paper has been used to electric insulating of the traction motor and generators for large capacity. We studied the electric field distribution using boundary element method for Aramid insulating paper. As a result of simulation, the electric field increased according to the surface roughness existence. Electric field decreased due to radius of surface roughness reduction, and Electric field concentration appeared at electrode boundary and rough surface.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.4
• /
• pp.351-355
• /
• 2003

In this paper, rectangular patch antenna is miniaturized by changing the middle of patch into narrow microstrip line except the edges of the patch where the fringing field occurs. Miniaturized rate, gain, bandwidth, radiation pattern of suggested antennas were compared with general square and rectangular microstrip antennas by using simulator Ensemble. As a result, it reduces the dimension of antenna by 44 % and improves the characteristic of x-pol by 40 dB as an advantage when compare with square microstrip antenna while it reduces bandwidth.