• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.332-335
• /
• 2000

We fabricated organic electroluminescent (EL) devices with single layer of poly(3-dodeoylthiophene) (P3DoDT) hlended with different amounts of poly(N-vinylcarbazole) (PVK) as a emitting layer. The molar ratio between P3DoDT and PVK changed with 1:0, 2:1 and 1:1. To improve the external quantum efficiency of EL devices, we applied insulating layer, LiF layer, between polymer emitting layer and Al electrode. All of the devices emit orange-red light and it's can be explained that the energy transfer occurs from PVK to P3DoDT. In the voltage-current and voltage-brightness characteristics of devices applied LiF layer, current and brightness increased with increasing applied voltage. The brightness of the device have a molar ratio 1:1 with LiF layer was about 10 times larger than that of the device without PVK at 6V. Electrical impedance properties of ITO/emitting layer/LiF/Al devices were investigated. In the Cole-Cole plots of impedance data, one semicircle was observed. Therefore, the equivalent circuit for the devices can be designed as a single parallel resistor and capacitor network with series resistor.

• Journal of the Semiconductor & Display Technology
• /
• v.16 no.2
• /
• pp.44-48
• /
• 2017

We explain optical and electrical properties of top and bottom-emission structured alternating-current powder electroluminescent devices (ACPELDs) with Ga-doped ZnO(GZO) transparent electrode. The top-emission ACPELDs were layered as the metal electrode/dielectric layer/emission layer/top transparent electrode and the bottom-emission ACPELDs were structured as the bottom transparent electrode/emission layer/dielectric layer/metal electrode. The yellow-emitting ZnS:Mn, Cu phosphor and the barium titanate dielectric layers were layered through the screen printing method. The GZO transparent electrode was deposited by the sputtering, its sheet resistivity is $275{\Omega}/{\Box}$. The transparency at the yellow EL peak was 98 % for GZO. Regardless of EL structures, EL spectra of ACPELDs were exponentially increased with increasing voltages and they were linearly increased with increasing frequencies. It suggests that the EL mechanism was attributed to the impact ionization by charges injected from the interface between emitting phosphor layer and the transparent electrode. The top-emission structure obtained higher EL intensity than the bottom-structure. In addition, charge densities for sinusoidal applied voltages were measured through Sawyer-Tower method.

• Korean Journal of Materials Research
• /
• v.31 no.10
• /
• pp.586-591
• /
• 2021

This paper proposes a mathematical model that can calculate the luminescence characteristics driven by alternating current (AC) power using the current-voltage-luminance (I-V-L) properties of organic light emitting devices (OLED) driven by direct current power. Fluorescent OLEDs are manufactured to verify the model, and I-V-L characteristics driven by DC and AC are measured. The current efficiency of DC driven OLED can be divided into three sections. Region 1 is a section where the recombination efficiency increases as the carrier reaches the emission layer in proportion to the increase of the DC voltage. Region 2 is a section in which the maximum luminous efficiency is stably maintained. Region 3 is a section where the luminous efficiency decreases due to excess carriers. Therefore, the fitting equation is derived by dividing the current density and luminance of the DC driven OLED into three regions, and the current density and luminance of the AC driven OLED are calculated from the fitting equation. As a result, the measured and calculated values of the AC driving I-V-L characteristics show deviations of 4.7% for current density, 2.9 % for luminance, and 1.9 % for luminous efficiency.

• Journal of the Semiconductor & Display Technology
• /
• v.6 no.2 s.19
• /
• pp.11-14
• /
• 2007

For the fabrication of blue color organic light emitting diodes(OLED) with a high performance, 2-TNATA [4,4',4"-tris (2-naphthylphenyl-phenylamino)-triphenylamine] as hole injection material and NPB [N,N'-bis (1-naphthyl) -N,N'-diphenyl-1,1'-biphenyl-4,4'-diamine] as hole transport material were deposited on the ITO (indium tin oxide)/glass substrate by the vacuum thermal evaporation. After then, blue color emission layer was deposited using TPM-BiP[(4'-Benzoylferphenyl-4-yl)phenyl-methanone-Diethyl(biphenyl-4-ymethyl)phosphonate] and GDI602 as a light emitting organic material. Finally, the two kinds of OLEDs with the structure of $ITO/2-TNATA/NPB/TPM-BiP/Alq_3/LiF/Al and ITO/2-TNATA/NPB/GDI602/Alq_3/LiF/Al$ were prepared by in-situ deposition. The maximum current density and luminance were found to be about $588\;mA/cm^2\;and\;5239\;cd/m^2$ at 12V for the OLED sample with the structure of $ITO/2-TNATA/NPB/TPM-BiP/Alq_3/LiF/Al$. Color coordinate of blue OLED was x=0.18, y=0.18 (at llV) and the maximum current efficiency was 2.82 cd/A (at 6V) with the peak emission wavelength of 440 nm.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.1
• /
• pp.29-35
• /
• 2000

Luminescent characteristics of SrS:Cu,X TFeL devices fabricated by electron-beam deposition system were studied. The SrS powders were used as the host materials and Cu, $CuF_2,\;Cu_2S$ or CuCl powders were added as the luminescent center. The emission spectra of the SrS:Cu,X TFEL devices strongly depended on coactivators. The luminance($L_{40}$) and efficiency(${\eta}_{20}$) of SrS:$Cu_2S$ TFEL device were 1443 cd/$m^2$ and 2.44 lm/w, respectively. Green color was observed from this TFEL device. The luminous efficiency of SrS:$Cu_2S$ TFEL device was higher than that of ZnS:Tb TFEL device, and it also could be good green phosphors for TFEL devices. The luminance($L_{40}$) and efficiency(${\eta}_{20}$) of SrS:CuCl TFEL device were 262 cd/$m^2$ and 0.26 lm/w, respectively. Blue color was emitted from this TFEL device.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.8
• /
• pp.17-23
• /
• 2002

The SrS:CuCl TFEL devices were fabricated by electron-beam deposition and the luminescent characteristics of the fabricated SrS:CuCl TFEL devices were studied. The SrS powder was used as the host materials and 0.05 ~ 0.6 at% of CuCl powder was added as the luminescent center. The deposition conditions of substrate temperature, electron beam current, and deposition rate were 500 $^{\circ}C$ , 20 ~ 40 mA, and 5 ~ 10 /sec, respectively The total thickness of the phosphor layer deposited was 6000 . The blue emission at low CuCl concentrations was observed from the luminescent centers of monomer, dimer, trimer, and tetramer, The bright greenish blue emission at high CuCl concentrations was observed from the dimer and trimer luminescent centers. The maxium luminance was observed from the SrS:CuCl TFEL devices doped with 0.2 at% of CuCl concentration and the threshold voltage, luminance(L$_{40}$ ), efficiency(η$_{20}$) and CIE coordinate obtained were 55 V, 728 cd/$m^2$, 0.49 lm/w, and (0.21, 0.33), respectively..

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.427-427
• /
• 2010

전색 디스플레이의 배경조명과 일반조명으로 응용 가능한 백색 유기발광소자를 제작하기 위해서는 삼원색을 혼합하는 방법과 단색광원의 색변환을 이용하는 방법등이 제안되었다. 삼원색을 혼합하는 방법의 연구가 접근방법 및 효율개선이 용이하기 때문에 많은 연구가 진행되어왔다. 그러나 색변환 방법을 사용하는 구조는 삼원색을 혼합하는 방법에 비해 공정이 단순하며 공정 가격이 낮아지고 안정적인 구조라는 장점이 있기에, 본 연구에서는 무기물 형광체를 청색유기발광 소자에 결합하여 제작된 백색 유기발광소자의 전기적 성질과 광학적 성질을 규명하는 연구를 진행하였다. 본 연구에서는 나노크기의 균일한 형광체를 제작 할 수 있는 졸겔 방법으로 적색 형광체를 제작하였다. 졸겔 방법으로 제작된 형광체에 대한 주사현미경 측정 결과 입자의 표면이 고르며 크기가 작고 균일 하였고, 높은 온도 열처리에 따라서 용매제가 대부분 제거되었기 때문에 형광체 발광 특성이 잘 일어났음을 확인 할 수 있었다. 제작된 형광체의 광학적 성질을 조사하기 위해 형광 루미네센스 측정을 하여 발광특성을 분석하였으며 실제 청색 유기발광소자에 적용하기 위해 tris((3,5-difluoro-4-cyanophenyl)pyridine)iridium (FCNIr)-doped 3,5-bis (N-carbazolyl) benzene (mCP)를 발광층으로 사용하는 진청색의 인광 유기발광소자 배면에 무기물 형광체를 결합하여 인가한 전압에 따른 전계발광분광특성의 변화를 조사하였다. 유기발광소자와 결합된 적색 무기물 형광체는 진청색 인광 유기발광소자에서 발광된 청색빛의 일부를 흡수하여 적색으로 색변환을 하였고 이는 무기물 형광체내에 첨가된 Mn 원자에 의해 색변환이 이루어졌음을 확인하였다. 무기물 형광체를 사용한 백색 유기발광소자의 색변환 메카니즘 및 효율 증진에 대한 연구는 고효율 유기발광소자 제작을 가능하게 할 것이다.

• The Journal of the Korea Contents Association
• /
• v.2 no.3
• /
• pp.146-151
• /
• 2002

The $Ca_{1-x}$Sr$_{x}$S:CuCl TFEL devices were fabricated by electron-beam deposition system and luminescent characteristics of the TFEL devices were studied. The SrS and CaS powders were mixed to form $Ca_{1-x}$Sr$_{x}$S host materials and 0.2 at% of CuCl was added as the activator. The luminance(lao) and peak emission wavelength of CaS:CuCl TFEL devices were 9.5 cd/m$^2$ and 492 nm, respectively. The luminance(L$_{30}$) and peak emission wavelength of SrS:CuCl TFEL devices were 633 cd/m$^2$ and 500 nm, respectively. It seems that the addition of CaS into the SrS host material generates blue shift of the EL emission characteristics but reduces the luminance and the luminous efficiency of the $Ca_{1-x}$Sr$_{x}$S:CuCl TFEL devices drastically.

• Korean Journal of Materials Research
• /
• v.11 no.6
• /
• pp.448-452
• /
• 2001

The ZnS:Cu,Cl thick film electroluminescent devices with the stacking type(separated with phosphors and insulator layers) and the composite type (mixed with phosphor and insulator materials) emission layers were fabricated on ITO/glass substrates by the screen printing methods. The opical and electrical properties were investigated as fundations of applied voltages and frequencies. In the stacking type, the luminance was about 58 cd/$\m^2$ at the applied voltage of 400Hz, 200V and increased to 420 cd/$\m^2$ with increasing the frequency to 30Hz. For the composite type devices, the threshold voltage was 45V and the maximum luminance was 670 cd/$\m^2$ at the driving condition of 200V, 30Hz. The value of luminance of the composite type device showed 1.5 times higher than that of stacking type device. The main emission peak was 512 nm of bluish-green color at 1Hz frequency below and shifted to 452 nm in the driving frequency over 5Hz showing the blue omission color. There were no distinct differences of the main emission peaks and color coordinate for both samples.

• Journal of the Microelectronics and Packaging Society
• /
• v.10 no.1
• /
• pp.1-5
• /
• 2003

The multi-layered OELDs(organic electroluminescent devices) were prepared on the patterened ITO (indium tin oxide)/glass substrates by the vacuum thermal evaporation method. The $Alq_3$ (tris-(8-hydroxyquinoline)aluminum) low molecule compound was used as the light emission layer. TPD(triphenyl-diamine) and $\alpha-NPD$ were used as the hole transport layer. CuPc (Copper phthalocyanine) was also used as the hole injection layers. In addition, QD2 (quinacridone2) organic material with $10\AA$ thickness was deposited in the $Alq_3$ emission layer to improve the luminance efficiency. The threshold voltage was about 7V for all devices. The luminance and efficiency of devices was improved by substitution the $\alpha-NPD$ for TPD as the hole as the hole transport layer. The luminance efficiency of the OELD sample with QD2 thin film in the $Alq_3$ emission layer was found to be 1.55 lm/W, which is about 8 times larger value compared to the sample without QD2 thin layer.