• Radiation Oncology Journal
• /
• v.19 no.2
• /
• pp.163-170
• /
• 2001

Purpose : The measurement of radiation survival using a clonogenic assay, the established standard, can be difficult and time consuming. In this study, We have used the MTT assay, based on the reduction of a tetrazolium salt to a purple formazan precipitate by living cells, as a substitution for clonogenic assay and have examined the optimal condition for performing this assay in determination of radiation sensitivity. Materials and Methods : Four human cancer cell lines - PCI-1, SNU-1066, NCI-H630 and RKO cells have been used. For each cell line, a clonogenic assay and a MTT assay using Premix WST-1 solution, which is one of the tetrazolium salts and does not require washing or solubilization of the precipitate were carried out after irradiation of 0, 2, 4, 6, 8, 10 Gy. For clonogenic assay, cells in $25\;cm^2$ flasks were irradiated after overnight incubation and the resultant colonies containing more than 50 cells were scored after culturing the cells for $10\~14$ days. For MTT assay, the relationship between absorbance and cell number, optimal seeding cell number, and optimal timing of assay was determined. Then, MTT assay was performed when the irradiated cells had regained exponential growth or when the non-irradiated cells had undergone four or more doubling times. Results : There was minimal variation in the values gained from these two methods with the standard deviation generally less than $5\%$, and there were no statistically significant differences between two methods according to t-test in low radiation dose (below 6 Gy). The regression analyses showed high linear correlation with the $R^2$ value of $0.975\~0.992$ between data from the two different methods. The optimal cell numbers for MTT assay were found to be dependent on plating efficiency of used cell line. Less than 300 cells/well were appropriate for cells with high plating efficiency (more than $30\%$). For cells with low plating efficiency (less than $30\%$), 500 cells/well or more were appropriate for assay. The optimal time for MTT assay was after 6 doubling times for the results compatible with those of clonogenic assay, at least after 4 doubling times was required for valid results. In consideration of practical limits of assay (12 days, in this study) cells with doubling time more than 3 days were inappropriate for application. Conclusion : In conclusion, it is found that MTT assay can successfully replace clonogenic assay of tested cancer cell lines after irradiation only if MTT assay was undertaken with optimal assay conditions that included plating efficiency of each cell line and doubling time at least.

• Investigative Magnetic Resonance Imaging
• /
• v.13 no.2
• /
• pp.161-170
• /
• 2009

Purpose : A parallel imaging method provides us to improve temporal resolution to obtain three-dimensional (3D) MR images. The objective of this study was to optimize three 3D MRI techniques by adjusting 2D SESNE factors of the parallel imaging method in phantom and human brain. Materials and Methods : With a 3 Tesla MRI system and an 8-channel phase-array sensitivity-encoding (SENSE) coil, three 3D MRI techniques of 3D T1-weighted imaging (3D T1WI), 3D T2-weighted imaging (3D T2WI) and 3D fluid attenuated inversion recovery (3D FLAIR) imaging were optimized with adjusting SESNE factors in a water phantom and three human brains. The 2D SENSE factor was applied on the phase-encoding and the slice-encoding directions. Signal-to-noise ratio(SNR), percent signal reduction rate(%R), and contrast-to-noise ratio(CNR) were calculated by using signal intensities obtained in specific regions-of-interest (ROI). Results : In the phantom study, SENSE factor = 3 was provided in 0.2% reduction of signals against without using SENSE with imaging within 5 minutes for 3D T1WI. SENSE factor = 2 was provided in 0.98% signal reduction against without using SENSE with imaging within 5 minutes for 3D T2WI. SENSE factor = 4 was provided in 0.2% signal reduction against without using SENSE with imaging around 6 minutes for 3D FLAIR. In the human brain study, SNR and CNR were higher with SENSE factors = 3 than 4 for all three imaging techniques. Conclusion : This study was performed to optimize 2D SENSE factors in the three 3D MRI techniques that can be scanned in clinical time limitations with minimizing SNR reductions. Without compromising SNR and CNR, the optimum 2D SENSE factors were 3 and 4, yielding the scan time of about 5 to 6 minutes. Further studies are necessary to optimize 3D MRI techniques in other areas in human body.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.15 no.3
• /
• pp.187-203
• /
• 2009

This study monitored marine environments in system coastal waters of the South Sea of Korea during the period of 2005-2007 and analyzed the data from environmental parameters and nutrients, which contributed to fluctuate marine environmental characteristics in aquaculture. On the basis of the fluctuation of temperature depending on seasons and sampling sites, too seasons of winter and summer showed a remarkable temperature gap of $5^{\circ}C$ compared with spring and autumn. Salinity in spring and summer approached 9 psu in Morkpo. Most of sampling sites showed COD below 2mg/L, indicating somewhat optimal environmental conditions. T-N and T-P also had desirable horizontal distributions all year round the concentration of SS was higher, but Chi. a was well-distributed horizontally except for Morkpo. Marone environmental parameters of surface water were similar to those of bottome water except for Morkpo. Most of sampling sites showed the ratio of N/P below 16, impling that nitrogen played an important role in growth of phytoplankton as a limiting factor. The relationship between Chi. a and nutrients was positive linear, whereas the relationship between Chi. a and COD were very strong positive. winder, Spring and Summer showed the strong relationship between Chi. a and COD. In the analysis of dendogram based on environmental parameters using SPSS ver. 10.0, the station 7 did not belong to other stations, and kept an independent place. The relationships of waters between Jindo, Wando and Heanam ware close, compared with other waters. Consequently, these regions except for Morkpo into which fresh water is introduced by the dike showed somewhat optimal environmental parameters and nutrients in year, and were assumed to maintain the desirable marine conditions for aquaculture.

• Archives of design research
• /
• v.20 no.3 s.71
• /
• pp.279-288
• /
• 2007

Today, design is not free from fashion, which emerges and vanishes temporarily, and aims at equalization. As a result, products quickly become obsolete because of fashion. This means that the span of products is determined by a social concept, which is not clarified, regardless of their functions. Usable products will gradually disappear from us and it will cause serious environmental problems, unless we can find out measures against fashion. As such, it is important to study the characteristics of the shaker's design in this circumstance. The Shaker's community has a distinguishable difference from other general societies. Temporary fashion and misled information cannot interfere with their consciousness. Religion, the life and the principle of design have developed on the same level in their community. Especially, any decoration or the difference of materials is not allowed in shaker's design. It reflects their thinking that all people are equal in the sight of God. Therefore, any decoration for social and economical superiority can not be used. Through this consciousness, they can be free from fashion or decoration. They, also, believe that they can reach perfection through practicality and simplicity. The reason why shaker's design is not disturbed by fashion is that their belief is involved in their design. Consequently, if religious or conscious contents are primarily set up, design can be free from fashion and products can be used for a long time.

• Journal of Life Science
• /
• v.16 no.2 s.75
• /
• pp.289-296
• /
• 2006

In order to establish highly efficient gene transfer condition at early stage of soybean transformation, various experiments were performed and compared their efficiencies by transient GUS analysis; those conditions are genotype determination of Korean soybean cultivars for amenability to Agro-infection, appropriate agar and selective agent concentration, orientation of explant placement, hormone pre-culture, and liquid selection condition. In the genotype screen of Korean soybean varieties, 14 amenable genotypes were selected. For efficient Agrobacterium washing, cefotaxime was chosen and hygromycin at the concentration of 10 and 15 ppm was used as selection agent in the media. Agar concentration was slightly better in 0.6% and 0.8% for both shoot and callus formation, and explant placement with adaxial side down showed high frequency of GUS expression. For wounding treatment, oriental needle was efficient than scalpel for shoot formation and gene transfer. To increase the frequency of gene transfer, hormone pre-treatment was applied. BA at the concentration of 5 and 10 ppm resulted in better survival at the late stage of selection in shoot elongation media. Selection in liquid media after hormone pre-treatment seemed to be effective to remove the escaped non-transformants at early stage of procedure. Considering the results obtained, Eunhakong could be the first choice as a material for soybean transformation among Korean soybean genotypes.

• Korean Journal of Medicinal Crop Science
• /
• v.4 no.2
• /
• pp.157-162
• /
• 1996

Experiments were conducted from 1994 to 1995 to understand the effects of the labor-saving seeding and planting density on growth and root yield of Astragalus membranaceus. The drilling seeder reduced seeding time than the hand seeding; It takes 3. 5hrs/l0a to seed by drilling seeder while 33. 0hrs/l0a by hand seeding, which labor reducing rate was 89. 4 %. Emergence rate in the drilling seeder was increased 17% than in the hand seeding, so the root yield were increased 23% to 136. lkg/l0a in using drilling seeder compared to 110. 3kg in hand seeding. On the effect of planting density on the growth characteristics plant height was long in dense planting and stem diameter was thick in spacious planting. Root diameter and dry root weight root per plant were decreased in dense planting and root yield was highest in optimum planting densities $(6\;row\;(15cm)\;{\times}\;10cm)$ in the harvest of 1 year old plants in Astragalus membranaceus. The gross profit were increased 23% to 1,933 thousand won per l0a in the drilling seeder compared to 1,566 thousand won in the hand seeding, also the managing costs were reduced 18% to 406 thousand won per l0a in the drilling seeder than 494 thousand won per l0a in the hand seeding.

• Korean Journal of Medicinal Crop Science
• /
• v.4 no.2
• /
• pp.139-144
• /
• 1996

This research was carried out to clarify effects of cultural condition on the content of Alisol B-monoacetate, whose function is antihypercolesterol in blood, and yield in Alisma Rhizomes. When the corm part of Alisma Rhizomes was extracted by shaking extraction at $25^{\circ}C$ and reflux extraction at $40^{\circ}C$ to $100^{\circ}C$ four times, the total content of Alisol B-monoacetate was 0. 402%, 0. 425% and 0. 402% at $25^{\circ}C$, $40^{\circ}C$ and $60^{\circ}C$ respectively. The recovery rate was 97% by three times extraction at $25^{\circ}C$, and 96% and 97% by three times extraction at $40^{\circ}C$ and $60^{\circ}C$ respectively. When the corm was harvested on Oct. 30, the content of Alisol B-monoacetate was 0. 46% but it was increased to 0. 71% on Nov. 30. In the case of Oct. 30, the corms of $S(4{\sim}14g\; FW)$ size were determined to contain the highest level of Alisol B-monoacetate (0. 53%), and the content was decreased as the corn size was increased. This tendency was also adopted on Nov. 30. On the other hand, the content of crude protein and starch was changed rarely by the period of harvest. When the planting depth was $0{\sim}1cm$, the yield was the highest as 206kg/10a, and the yield was decreased as the planting depth was deep. The variation of the content of Alisol B-monoacetate was small as 0. 33% to 0. 39% by planting depth. From the above results it could be concluded that the optimum time for harvest of Alisma Rhizomes is Nov. 30 and the optimum planting depth is $0{\sim}1cm$.

• Journal of the HCI Society of Korea
• /
• v.12 no.2
• /
• pp.21-29
• /
• 2017

While the second and the third industrial revolutions made it possible a few standardized designs to be extracted and produced in large quantities, the recent development of the 3D printing technology allowed many individuals to reflect their unique personal characteristics on their creative works and produce them in large quantities-i.e., personally customized designs and mass production of various designs. However, for the customized designs and the mass production of various designs through the 3D printing technology, the individuals should use a 3D modeling software and the supporting features of the software can significantly affect the type and shape of a creative work. In this study, we surveyed the individuals who design the creative works using 3D printers about the type of software that they use and the type of creative works that they design using the software, to propose a possible direction of new software that supports their activities. To do this, we first surveyed sixty members of the OpenCreators, which is the largest 3D printing creator community in South Korea, about the 3D modelling Software that they use for their 3D printing creations, the best 3D modelling software for the 3D printing, and the type of frequently printing creation using the best 3D modelling software. We then analysed the response results. As a result, we found that most of 3D printing creators in South Korea use Rhino and 123D Design. More specifically, the Rhino was being widely used by the people in the 3D printing industry to print prototypes, samples, and mock-ups, while the 123D Design was being mainly used for general purposes such as educational tools, accessories, and home interior accessories. Therefore, we believe it is necessary to develop the software in two separated categories, i.e. for the business, like the Rhino, and for the beginners, and educational and personal purposes, like the 123D Design. Finally, we stressed and proposed the necessity to support individual creators by developing an industry-specific 3D modeling software.

• Journal of The Korean Association For Science Education
• /
• v.21 no.3
• /
• pp.516-528
• /
• 2001

In the educational study, the measure of EEG(brain waves) can be useful method to study the functioning state of brain during learning behaviour. This study investigated the changes of neuronal response according to four times repetition of audio-visual learning. EEG data at the prefrontal$(Fp_{1},Fp_{2})$ were obtained from twenty subjects at the 8th grade, and analysed quantitatively using FFT(fast Fourier transform) program. The results were as follows: 1) In the first audio-visual learning, the activities of $\beta_{2}(20-30Hz)$ and $\beta_{1}(14-19Hz)$ waves increased highly, but the activities of $\theta(4-7Hz)$ and $\alpha$ (8-13Hz) waves decreased compared with the base lines. 2). According to the repetitive audio-visual learning, the activities of $\beta_{2}$ and $\beta_{1}$ waves decreased gradually after the 1st repetitive learning. And, the activity of $\beta_{2}$ wave had the higher change than that of $\beta_{1}$ wave. 3). The activity of $\alpha$ wave decreased smoothly according to the repetitive audio-visual learning, and the activity of $\theta$ wave decreased radically after twice repetitive learning. 4). $\beta$ and $\theta$ waves together showed high activities in the 2nd audio-visual learning(once repetition), and the learning achievement increased highly after the 2nd learning. 5). The right prefrontal$(Fp_{2})$ showed higher activation than the left$(Fp_{1})$ in the first audio-visual learning. However, there were not significant differences between the right and the left prefrontal EEG activities in the repetitive audio-visual learning. Based on these findings, we can conclude that the habituation of neuronal response shows up in the repetitive audio-visual learning and brain hemisphericity can be changed by learning experiences. In addition, it is suggested once repetition of audio-visual learning be effective on the improvement of the learning achievement and on the activation of the brain function.

• Journal of The Korean Association For Science Education
• /
• v.32 no.1
• /
• pp.30-45
• /
• 2012

Educational communities around the world have concentrated on integrative efforts among science, technology, engineering and mathematics (Science, Technology, Engineering, and Mathematics: STEM) subjects. Korea has focused on integrative education among STEAM (Science, Technology, Engineering, Arts, and Mathematics) school subjects to raise talented human resources in the fields of science and technology. The purpose of this study was to analyze secondary school science, technology, and mathematics teacher's perceptions and needs toward integrated education and integrative STEM education. A total of 251 secondary school teachers from all areas of the country who have taught science, mathematics, and technology were surveyed by using a self-reported instrument. The findings were as follows: First, teachers have used little integrated education in their classes due to insufficient time in the actual preparation of the integrated education and the lack of expertise, teaching experience, and teaching-learning materials for the integrated education, while they have positive thoughts about the need of integrated education. Second, they presented several needs to facilitate the integrated education: development of a variety of integrated programs, school administrative and financial support, and in-service teachers' training. Third, overall perception toward integrated STEM education was not sufficient, but most teachers perceived the need toward integrated STEM education due to students' development in their creativity, thinking skills, and adaptability. Fourth, they perceived that it was imperative to develop the various integrated STEM education programs, distribute the materials, and help STEM teachers' understanding toward integrated STEM education. Fifth, they perceived that the most relevant method to integrate STEM subjects was the problem solving approach. In addition, they appreciate that the integrated STEM education is highly efficient in not only developing integrated problem solving skills and STEM related literacy, but also in positively impacting the rise of talented human resources in the fields of science and technology. In order to increase the awareness of STEM-related secondary school teachers and vitalize the integrated STEM education, it is necessary to develop and spread a variety of programs, effective teaching and learning materials, and teachers' training programs.