• Journal of the Economic Geographical Society of Korea
• /
• v.26 no.3
• /
• pp.337-357
• /
• 2023

Universities and local governments in Korea are simultaneously experiencing the difficulties of a decrease in the youth population and a decrease in the school-age population, and close cooperation between universities and local governments is urgently needed to solve this problem. Representative methods of such cooperation include the establishment of a regional innovation system and the theories of innovation clusters and triple helix models. In addition to these theories, the aim is to derive sustainable conditions for the local government-university cooperation model by examining various cases of cooperation at home and abroad. This is the purpose of this paper. In particular, through case studies of cooperation between local governments and universities at home and abroad, three types of models (job, education, and housing) were analyzed, and common conditions and requirements for sustainable cooperation were proposed. In order for cooperation between local governments and universities to continue and produce successful results, mutual benefit creation, infrastructure construction and operation appropriate for capabilities, flexibility, and mutual responsibility are necessary. Furthermore, a model that suits the capabilities of local governments and universities must be found, and in this process, the university's research capabilities and commercialization capabilities of research results are especially important. In addition, it is essential to establish a new cooperation system between local governments, universities, and the central government.

• Journal of Korea Port Economic Association
• /
• v.39 no.3
• /
• pp.33-46
• /
• 2023

The Autonomous ships are equipped with a function to judge and navigate the sea conditions on their own, so the job of the ship officer who operates it changes. The educational curriculum to nurture ship officer with the ability to operate and manage autonomous ships must also be changed. This study aimed to develop the curriculum for training autonomous ship officer by using the Delphi survey method suitable for predicting the uncertain future. Among the current 61 subjects for training ship officer identified in the Delphi survey, 32 subjects with high importance should be maintained in the training for autonomous ship officer, and subjects with low importance should be abolished or integrated into other subjects. These subjects were collectively referred to as 'general courses'. The expert panel of the Delphi survey suggested 42 items as new subjects, with 18 items of 'high', 14 items of 'middle', and 10 items of 'low'. Through in-depth analysis of these items by experts, 27 subjects were adjusted and three courses were proposed : 1)'Basic course(10 courses)' for developing basic capabilities such as basic theories for understanding advanced technology and information applied to autonomous ships, 2)'Job course(10 courses)' for practical competency directly related to autonomous ship operation, 3)'Intensive course(7 subjects)' for fostering land remote operators of autonomous ships. Since the introduction and spread of autonomous ships will progress rapidly, research to develop and supplement autonomous ship pilot training courses should be continued by reflecting the level of autonomous navigation of autonomous ships.

• Journal of the Korean Geotechnical Society
• /
• v.39 no.10
• /
• pp.5-18
• /
• 2023

The construction timeline for earthworks can be significantly reduced by substituting the conventional layer-by-layer compaction using a vibratory roller with single-layer compaction through the rapid impact compaction (RIC) method. Dynamic load compaction is well-suited for coarse-grained soils like sand. However, as the supply of sand, the primary reclamation material, becomes scarcer, the utilization of soil with fines is on the rise. To implement the dynamic load compaction, such as RIC, with reclaimed materials containing fines, it's imperative to determine the effective improvement depth. In this study, we assess the impact of the RIC method on the effective improvement depth for clean sand and public fill with fines, comparing field test results before and after RIC application. Our focus is on the cone resistance (q_c) as it pertains to compaction quality control criteria. In conclusion, it becomes evident that standardizing the cone resistance is vital for the quality control of various reclaimed soils with fines. We have evaluated the compaction quality control criteria corresponding to a relative density (Dr) of 70% for clean sand as Q_tn,cs = 110. As a result of this analysis, we propose new quality control criteria for q_c, taking into account the fines content of reclaimed soils, which can be applied to RIC quality control.

• Geophysics and Geophysical Exploration
• /
• v.26 no.4
• /
• pp.229-237
• /
• 2023

The use of artificial sources such as explosives and mechanical vibrations for seismic exploration in urban areas poses challenges, as the vibrations and noise generated can lead to complaints. As an alternative to artificial sources, the surface waves generated by traffic noise can be used to investigate the subsurface properties of urban areas. However, traffic noise takes the form of plane waves moving continuously at a constant speed. To apply existing surface wave processing/inversion techniques to traffic noise, the recorded data need to be transformed into a virtual shot gather format using seismic interferometry. In this study, various seismic interferometry methods were applied to traffic noise data, and the optimal method was derived by comparing the results in the Radon and F-K domains. Additionally, the data acquired using various receiver arrays were processed using seismic interferometry, and the results were compared and analyzed to determine the most optimal receiver array direction for exploration.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2022.09a
• /
• pp.46-46
• /
• 2022

본 연구의 목적은 약용과 식용으로서의 활용도가 높은 일당귀[Angelica acutiloba (Siebold & Zucc.) Kitagawa]의 GA₃농도에 따른 생육특성을 확인하고, 최적의 재배기술 개발 및 지속가능한 안정적인 작물생산에 대한 기초자료의 제공에 있다. 연구재료는 강원도 태백시에 위치하는 일당귀 재배농가에서 2021년 10월에 채종한 종자를 구입하였고, 영주시 풍기읍에 위치한 연구온실에서 연구를 수행하였다. 일당귀의 종자를 증류수에 48시간 침지 후 GA₃농도 4조건(50 ppm, 100 ppm, 500 ppm, 1,000 ppm)에 24시간 처리 후 72구 포트에 파종 후 출아율과 생육특성을 조사하였다. 연구결과 일당귀 종자는 16일이 경과한 시점부터 출아를 시작하였고, 500 ppm처리구에서 73.3%로 가장 높은 출아율을 나타냈다. 생육특성조사는 출아 후 40일(1차)과 80일(2차) 경과된 시점에서 총 2회를 수행하였는데 1차 생육조사에서는 주근길이와 직경을 제외한 모든 생육특성에서 처리구별 생육의 차이가 확인되지 않았으나 2차 생육조사에서는 지상부와 지하부의 모든 생육특성에서 처리구별 생육의 차이가 확인되었다. 잎수(6.3개)와 주근길이(4.26 cm)는 500 ppm처리구에서 가장 높은 생육량을 나타냈고, 지상부 높이(21.81 cm), 잎길이(9.0 cm), 잎너비(10.77 cm), 주근직경(5.71 mm)은 1,000 ppm처리구에서 가장 높은 생육량을 나타냈다. 따라서 GA₃ 처리에 따른 일당귀의 생육특성은 생육초기보다 후기로 갈수록 발현량이 높게 나타나는 것으로 판단된다. 또한 저농도의 GA₃처리보다 500-1,000 ppm 사이의 처리농도가 적합한 것으로 판단되며, 추후 일당귀의 유용성분 분석을 통한 이화학적 연구가 추가된다면 최적의 재배기술 확립을 통한 안정적인 작물 생산에 기여할 수 있을 것이라 사료된다.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2022.09a
• /
• pp.74-74
• /
• 2022

본 연구는 붉나무의 기능성 성분의 산업화 활용을 위한 고품질의 붉나무 1년생 용기묘 대량생산을 위해 실시되었다. 붉나무 1년생 용기묘의 묘목품질의 향상을 위해 다양한 농도의 시비처리하여 우량묘 생산에 적합한 시비수준을 구명하고자 하였다. 시비실험은 무시비구 포함하여 수용성 복합비료 (N:P:K=20:20:20, v/v)를 1,000mg·L^-1, 2,000mg·L^-1, 3,000mg·L^-1 수준으로 실시하였다. 시비처리는 붉나무 용기묘의 간장과 근원경 생장은 1,000mg·L^-1 시비처리구에서 생장이 가장 좋게 나타났으며 시비수준이 증가할수록 감소하는 경향을 보였다. 뿌리형태 특성분석에서도 전체뿌리길이, 투영단면적, 표면적 및 뿌리부피가 간장과 근원경 생장과 동일한 경향을 보이는 것으로 조사되었다. 건물 생산량은 부위별 잎, 줄기, 뿌리 및 전체가 모두 1,000mg·L^-1 시비처리구에서 가장 높았으며, 그 이상의 시비수준에서는 점점 감소하는 경향을 보였다. H/D(Hight/Root collar diameter)율은 전체가 3.82(무시비구) ~ 4.90, T/R(Top/Root)율은 전체가 0.56(1,000mg·L^-1 시비처리구) ~ 0.82로 조사되었다. 시비처리 에 의한 붉나무의 LWR(Leaf dry weight ratio)은 무시비구, SWR(Shoot dry weight ratio)은 3,000mg·L^-1 시비처리구, 그리고 RWR(Root dry weight ratio)은 1,000mg·L^-1 시비처리구에서 유의적 차이를 보이며 높게 나타났다. 묘목품질지수(QI)의 경우 1,000mg·L^-1 시비처리구에서 12.13으로 다른 시비수준들보다 월등히 높았다. 본 실험의 결과를 종합하면, 뿌리발달이 좋은 우량한 붉나무 생산에 적절한 시비수준은 1,000mg·L^-1 정도인 것으로 판단된다.

• Journal of Venture Innovation
• /
• v.5 no.2
• /
• pp.85-99
• /
• 2022

Dryers becoming commercially available for experimental and industrial use are classified to general drying oven, hot-air dryer, vacuum dryer, freezing dryer, etc. and kinds of them are various from the function, size and volume, etc. But the moisture measurement is not applied although it is important factor for the quality control and the performance improvement of products, and then now is very passive because the weight is weighed arbitrarily after dry-end. Generally the method for measuring moisture is divided by a direct measurement method and a indirect measurement method, and the former such as the change of weight or volume on the front and rear of separation of moisture, etc. is mainly used. Relatively a indirect measurement is very limited to apply due to utilize measurement apparatuses using temperature conductivity and micro-wave etc. In this research, we easily designed the moisture measurement system using the open-source based Arduino, and monitored moisture fluctuations and weight profiles in the real-time without the effect of external environment. Concretely the temperature-humidity and load cell sensors were packaged into a drying oven and the various change values were measured, and their sensors capable to operate 60℃ and 80℃ were selected to suitable for the moisture sensitive materials and the food dry. And also the performance safety using the organic samples of banana, pear, sawdust could be secured because the changes of evaporation rate as the dry time and temperature, and the measurement values of load cell appeared stable response characteristics through repeated experiments. Hereafter we judge that the reliability can be improved increasingly through the expansion of temperature-humidity range and the comparative analysis with CFD(Computational Fluid Dynamics) program.

• Journal of the Microelectronics and Packaging Society
• /
• v.30 no.4
• /
• pp.105-111
• /
• 2023

Electronic devices have been evolved to be mechanically flexible that can be endured repetitive deformation. This evolution emphasizes the importance of long-term reliability in metal wiring connecting electronic components, especially under bending fatigue in compressed environments. This study investigated methods to enhance adhesion between copper (Cu) and polyimide (PI) substrates, aiming to improve the reliability of copper wiring under such conditions. We applied oxygen plasma treatment and introduced a chromium (Cr) adhesion layer to the polyimide substrate. Our findings revealed that these adhesion enhancement methods significantly affect compression fatigue behavior. Notably, the chromium adhesion layer, while showing weaker fatigue characteristics at 1.5% strain, demonstrated superior performance at 2.0% strain with no delamination, outperforming other methods. These results offer valuable insights for improving the reliability of flexible electronic devices, including reducing crack occurrence and enhancing fatigue resistance in their typical usage environments.

• Journal of the Korean Society of Radiology
• /
• v.17 no.7
• /
• pp.1025-1031
• /
• 2023

We aimed to evaluate the radiation dose and image quality by changing the Scout view voltage in low-dose chest CT (LDCT) and applying scan parameters such as AEC (auto exposure control) and ASIR (adaptive statistical iterative reconstruction) to find the optimal protocol. Scout view voltage was varied at 80, 100, 120, 140 kV and after measuring the dose 5 times using the existing low-dose chest CT protocol, the appropriate kV was selected for the study using the Dose report provided by the equipment. After taking a basic LDCT shot at 120 kV, 30 mAs, ASIR 50% was applied to this condition. Signal-to-noise ratio (SNR) and contrast-to-noise ratio (CNR) were assessed by measuring Background noise (B/N). For dose comparison, CTDI_vol and DLP provided by the equipment were compared and analyzed using the formulas. The results indicated that the protocol of scout 140 + LDCT + ASIR 50 + AEC reduced radiation exposure and improved image quality compared to traditional LDCT, providing an optimal protocol. As demonstrated in the experiment, LDCT screenings for asymptomatic normal individuals are crucial, as they involve concerns over excessive radiation exposure per examination. Therefore, applying appropriate parameters is important, and it is expected to contribute positively to the public health in future LDCT based health screenings.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.6
• /
• pp.1143-1149
• /
• 2023

The purpose of this study was to the effects of case-based learning (CBL) on problem solving ability and academic self-efficacy in nursing students and was a quasi-experimental study with a one-group pretest-posttest design. The subjects of this study were 121 grade 4 students, and the data collection period was from Aprill 24 to June 12, 2023. The research procedure was scenario development, preliminary investigation, application of case-based learning classes, and follow-up investigation, and the CBL was conducted for 2 weeks, 50 minutes per week. The general characteristics of the subjects were obtained by frequency, percentage, mean, and standard deviation and the effects of CBL on problem solving ability and academic self-efficacy was tested using a paired t-test. The results of this study showed that nursing students' problem solving ability (t=-5.70, p<.001) and academic self-efficacy (t=-3.25, p<.002) improved after applying CBL compared to before applying it. We suggest the use of case-based learning as a strategy to improve problem-solving skills and academic self-efficacy in nursing education. In the future, follow-up research is needed to verify the effectiveness by developing and applying step-by-step clinical cases at an appropriate level according to the learning content of nursing major subjects by grade.