• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.11
• /
• pp.1050-1055
• /
• 2007

P.A.(public address) system is considered as an useful active soundscape appliance which can gives a place identity and vitality by introducing conventional musics, environmental musics, bird singing sounds etc. In this study, the main aim is to know the optimistic distance from the speaker and sound pressure level range of introducing sound. So, the sound pressure level of P.A. system due to distances were measured and subjects' responses with level variations were checked. The main results are as follows. Level range from 64 dB to 71 dB is comfortable for subjects. And the optimal level of introducing sound is related with sound source characteristics. The results of this study could be used for street furniture location design and P.A. system output level.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.726-729
• /
• 2006

As a active soundscape facility, P.A. system is a useful instrument to give place identity and vitality by letting out music, environmental music, bird singing sound etc. In this study, to know the optimistic distance and sound level range of introducing sound, sound levels due to distance were measured and subject responses were checked by questionnaire. Levels from 64dB to 71dB are recommended by subjects. And the optimistic level of introducing level is related with level variance of sound source. The results of this study could used for street furniture location design and P.A. system output level.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.387-392
• /
• 2008

본 논문에서는 에너지 절약을 위한 방법으로 여름철 냉방의 적정 온도 및 풍향을 제어하기 위한 가상의 시뮬레이션을 목적으로 열 영상과 퍼지 추론 규칙을 적용한 온도 및 풍향 제어 기법을 제안한다. 온도 제어를 위한 가상 시뮬레이션에서 열 영상을 분석하기 위해서 영상을 $300{\times}400$의 크기를 가지는 색상 분포 영상으로 변환한다. 색상 분포 영상은 Red, Magenta, Yellow, Green, Sky, Blue의 온도 값을 가지는 R, G, B 값이며 각 색상은 $ 24.0^{\circ}C$에서 $27.0^{\circ}C$의 분포의 온도 값을 가진다. 색상 분포 영상은 아래 계층부터 레벨1에서 레벨10의 높이 계층으로 분류한다. 분류한 각 계층은 고유의 색상 분포도를 가지며 색상이 가지는 온도 수치에 따라서 계층별로 온도를 구성한다. 풍향 제어를 위한 각 계층의 높이는 레벨1에서 레벨3까지는 하위층이며, 레벨 4부터 레벨 7은 중간층, 레벨 8부터 레벨 10은 상위층으로 분류한다. 각 계층의 온도와 높이 레벨 값은 온도 조절과 풍향의 우선 순위, 강도 조절, 지속 시간을 구하기 위한 파라미터이다. 실내 공간의 전체적인 온도의 균형과 풍향을 제어하는 과정으로 풍향의 방향, 지속시간을 적용하고 풍향의 강도를 구하기 위해서 색상 분포영상의 각 구간의 온도 및 높이의 특징을 적용하여 퍼지 소속 함수를 설계한 후, 소속 함수의 소속도를 구하고 퍼지 추론 규칙을 적용하여 풍향의 강도를 구한다.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.12
• /
• pp.189-196
• /
• 2010

Domestic software test maturity level is the most Level 2 below based on TMMi. The first condition of enhancement of test maturity is that know exactly what the current maturity. There is no Level 1 definition in TMMi, but even the same level of maturity level of an organization, there are clear differences. In this study, grasp a maturity level of Level 1 organization, while less effort to improve in Level organization, the ways to achieve Level 2 is presented. Sub practices with dependencies in Level 2 is grouped with the corresponding process areas and define a Level 1 newly at 3 phases. If sub practices with dependencies are tied and improve a process, it will produce the effect which attains the practices all at once. Verify the adequacy of three phases, as a result, an organization clearly identify Test Maturity Level 1, we know that the organization can set specific improvement goals and direction.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.196.1-196.1
• /
• 2012

인공위성은 지상에서부터 발사 및 궤도 운용까지 다양한 전자파 환경에 노출되며 이러한 환경에서의 위성 운용을 검증하기 위하여, 다양한 전자파 환경을 모사하는 전자파 환경시험을 수행하게 된다. 특히, 궤도내에서 위성의 운용시 지상국과의 교신을 위하여 X 밴드 안테나와 S 밴드 안테나에서 지상국으로 강한 전자기파를 방사하게 되는데, 이 방사에너지가 위성에 영향을 주는지 검증하는 시험을 지상에서 수행한다. 이런 시험을 RFC (RF Auto-Compatibility) 시험이라고 부른다. RFC 시험은 위성으로부터 방사되는 전자기파가 외부에 새어나가지 않도록 전자파 챔버내에서 시험하며, 강한 전자기파를 흡수할 수 있는 고전력 전파 흡수체가 설치된 전자파 챔버가 필요하다. RFC 시험시 X 밴드 안테나와 S 밴드 안테나를 최대 전력으로 방사시키고, 이때 위성 주변에 전자파 센서를 부착하여 전계강도를 측정함으로써 위성으로 입사되는 전자기파의 세기가 적정 레벨 이하인지를 검증하고, 동시에 위성의 운용상태를 확인하여 위성에 영향이 없음을 검증한다. 본 논문에서는 다목적 실용위성 3호의 RFC 시험시 측정된 전계강도를 이론적으로 검증하고, RS 시험시 인가하는 레벨과의 상관관계를 설명한다. RS 시험 레벨의 선정은 위성 안테나의 방사레벨과 관련이 있으며 RFC 시험결과를 검토함으로써 RFC 시험 결과의 유효성과 RF 레벨 요구사항의 적절성을 검증한다.

• The Journal of the Korea Contents Association
• /
• v.10 no.8
• /
• pp.95-103
• /
• 2010

Raw files record luminance values corresponds to each pixel of a digital camera sensor. In digital imaging, controlling exposure to capture the first highlight stop is important on linear-distribution of raw file characteristic. This study sought to verify the efficiency of ETTR method and found the optimum over-exposure amount to maintain the first highlight stop to be the largest number of levels. This was achieved by over-exposing a scene with a raw file and converting it to under-exposure in a raw file converting software. Our paper verified the efficiency of ETTR by controlling the exposure range and ISOs. Throughout the results, if exposure increases gradually 6 steps, dynamic range is also increased. And it shows that the optimized exposure value is around + $1\frac{2}{3}$ stop over compared to the normal exposure with the high ISOs simultaneously. We compared visual noise value at $1\frac{2}{3}$ stop to the normal exposure visual noise. Based on the normal exposure's visual noise, we can confirm that visual noise decrement is increased by increasing ISOs. In this experimental result, we confirm that overexposure about + $1\frac{2}{3}$ stop is the optimum value to make the widest dynamic range and lower visual noise in high ISOs. Based on the study results, we can provide the effective ETTR information to consumers and manufacturers. This method will contribute to the optimum image performance in maximizing dynamic range and minimizing noise in a digital imaging.

• Journal of the Korean Institute of Gas
• /
• v.27 no.2
• /
• pp.32-38
• /
• 2023

In a chemical plant, while supplying corrosive fluid to a storage tank with a pump, an accident occurred where the corrosive fluid leaked through the upper exhaust vent because the level indicator was not accurately determined. There are various causes of leakage accidents, but we focused on the sticking of the level indicator of the level gauge, which is the direct cause. As a result of the analysis, the level indicator used in the workplace where the accident occurred was randomly replaced, and in the summer when the accident occurred, the tubular type level gauge was found to be more likely to stick than other types because thermal expansion easily occurs. In addition, there were difficulties in reviewing the proper installation because the installation standards for measuring instruments installed in storage tanks were not clear in Korea. Therefore, in this study, based on accident cases and overseas standards, we are going to find out about precautions when installing storage tank instrumentation.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.3 s.120
• /
• pp.274-281
• /
• 2007

Road traffic noise is not produced by any one factor rather it occurs as a composition of various factors. Its occurrence is made by running engine noise, tire frictional, and exhaust noise etc. The quality of the noise depends on the size of the vehicles, rotation and engine speed, vehicle load, package state of the road and incline etc. The occurrence of any noise level of heavy trucks appears louder than smaller vehicles and the noise levels produced differs according to speed and load etc between similar size vehicles. Other factors such as traffic density, average speed, mixing rate of heavy vehicles, and the distance between vehicles also generate road traffic noise. In this paper we examine 2, 4, and 6-lane roads in Jeonju. Consequently, this study examines the means used to measure road traffic noise. It was found that when there is a large traffic density and the average velocity is below 70 km/h, the noise level could receive a relative proper value by the current measuring means. But in the case of night-time, it was found that the current measuring method is inapposite.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.674-677
• /
• 2005

As a passive soundscape facility, fountain is a useful way to give place such as public square, park identity and vitality. In this study, to know the optimistic distance and sound level range from fountain, sound levels due to distance were measured and subject responses were checked by questionnaire. Levels from 56dB to 68dB are recommended by subjects and moving forward to fountain decreases less comfort ratio than backward Moving forward 5m and backward 5m(total range 10m), there is little difference in comfort ratio. The results of this study could used for street furniture location design and P.A system output level.

• Journal of the Institute of Convergence Signal Processing
• /
• v.4 no.4
• /
• pp.52-57
• /
• 2003

A PID parameter tuning method was presented by the fuzzy singleton inference, based on step response-shaping of plant and experience knowledge of expert. The parameter-tuning has tow levels. The higher level determines modified coefficients for the controller based on operator's tuning know-how for characteristics of plant which can not be modeled. The lower level determines specified coefficients based on characteristics of response by Ziegler-Nickel's bounded sensitivity method. The last level parameters tuning of a PID controller is adjusted which the modified and specified coefficients makes adjustment rule, and is adjusted the proper value to each parameters by fuzzy singleton inference. Moreover, proposed the tuning method can reflex exporter knowledge and operator's tuning know-how and fuzzy singleton inference is rapidly operated.