• Journal of the Institute of Convergence Signal Processing
• /
• v.13 no.1
• /
• pp.26-31
• /
• 2012

The highest frequency band of wavelet decomposition band is divided into 4 equal subbands and by the minimum power of the subbands and by the monotonic transform, the level adapted threshold is obtained. The adapted threshold is applied to the soft threshold technique to denoise high and middle frequency band noise of image signals. And the results of PSNRs are compared with the results obtained by the VisuShrink technique and by the technique using the monotonic transform and the weight value. The results showed the validity of this technique.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.1
• /
• pp.80-86
• /
• 2002

This paper describes to extend the MLFMA(Multi-Level Fast Multipole Algorithm) for three-dimensional capacitance computation in the case of conductors embedded in an arbitrary dielectric medium. The triangular meshes are used and refined in the area which has heavy charge density. This technique is applied to the capacitance extraction of three-dimensional structures with multiple dielectrics. The results show good convergence with the comparable accuracy, and this adaptive technique coupled with MLFMA is useful to reduce computing time and the number of elements with least additional computational efforts in large three dimensional problems.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.8
• /
• pp.823-829
• /
• 2003

For high frequency microstrip line modelling, a fast inductance extraction technique using an adaptive PEEC(partial element equivalent circuit) grid is proposed. The grid refinement technique is based on the current distribution depend on the excitation frequencies and the geometry of the microstrip lines. The adaptive ids are refined mainly in the area where heavy currents reside. This technique is applied to the inductance extraction of the microstrip lines. The results show fast convergence, and this adaptive technique is efficient to reduce computing time and the number of grids.

• Spatial Information Research
• /
• v.19 no.3
• /
• pp.95-106
• /
• 2011

Recently as efficient processing of aggregate queries for fetching desired data from sensors has been recognized as a crucial part, in-network aggregate query processing techniques are studied intensively in wireless sensor networks. Existing representative in-network aggregate query processing techniques propose routing algorithms and data structures for processing aggregate queries. However, these aggregate query processing techniques have problems such as high energy consumption in sensor nodes, low accuracy of query processing results, and long query processing time. In order to solve these problems and to enhance the efficiency of aggregate query processing in wireless sensor networks, this paper proposes Bucket-based Parallel Aggregation(BPA). BPA divides a query region into several cells according to the distribution of sensor nodes and builds a Quad-tree, and then processes aggregate queries in parallel for each cell region according to routing. And it sends data in duplicate by removing redundant data, which, in turn, enhances the accuracy of query processing results. Also, BPA uses a bucket-based data structure in aggregate query processing, and divides and conquers the bucket data structure adaptively according to the number of data in the bucket. In addition, BPA compresses data in order to reduce the size of data in the bucket and performs data transmission filtering when each sensor node sends data. Finally, in this paper, we prove its superiority through various experiments using sensor data.

• Journal of Korea Multimedia Society
• /
• v.3 no.5
• /
• pp.479-494
• /
• 2000

Although the proliferation of real-time multimedia services over the Internet might indicate its successfulness in dealing with heterogeneous environments, it is obvious, on the other hand, that the internet now has to cope with a flood of multimedia data which consumes most of network communication channels due to a great deal of video or audio streams. Therefore, for the purpose of an efficient and appropriate utilization of network resources, it requires to develop and deploy a new scalable transmission technique n consideration of respective network environment and individual clients computing power. Also, we can eliminate the waste effects of storage device and data transmission overhead in that the same video stream duplicated according to QoS. The purpose of this paper is to develop a technology that can adjust the amount of data transmitted as an MPEG video stream according to its given communication bandwidth, and technique that can reflect dynamic bandwidth while playing a video stream. For this purpose, we introduce a media scalable media decomposer working on server side, and a scalable media composer working o n a client side, and then propose a scalable transmission method and a media sender and a media receiver in consideration of dynamic QoS. Those methods proposed her can facilitate an effective use of network resources, and provide multimedia MPEG video services in real-time with respect to individual client computing environment.

• Korean Journal of Remote Sensing
• /
• v.37 no.6_3
• /
• pp.1985-1999
• /
• 2021

The purpose of this study is to apply urban heat island reduction techniques(green roof, cool roof, and cool pavements using heat insulation paint or blocks) recommended by the Environmental Protection Agency (EPA) to our study area and determine their actual effects through a comparative analysis between land cover objects. To this end, the area of Mugye-ri, Jangyu-myeon, Gimhae, Gyeongsangnam-do was selected as a study area, and measurements were taken using a drone DJI Matrice 300 RTK, which was equipped with a thermal infrared sensor FLIR Vue Pro R and a visible spectrum sensor H20T 1/2.3" CMOS, 12 MP. A total of nine heat maps, land cover objects (711) as a control group, and heat island reduction technique-applied land covering objects (180) were extracted every 1 hour and 30 minutes from 7:15 am to 7:15 pm on July 27. After calculating the effect values for each of the 180 objects extracted, the effects of each technique were integrated. Through the analysis based on daytime hours, the effect of reducing heat islands was found to be 4.71℃ for cool roof; 3.40℃ for green roof; and 0.43℃ and -0.85℃ for cool pavements using heat insulation paint and blocks, respectively. Comparing the effect by time period, it was found that the heat island reduction effect of the techniques was highest at 13:00, which is near the culmination hour, on the imaging date. Between 13:00 and 14:30, the efficiency of temperature reduction changed, with -8.19℃ for cool roof, -5.56℃ for green roof, and -1.78℃ and -1.57℃ for cool pavements using heat insulation paint and blocks, respectively. This study was a case study that verified the effects of urban heat island reduction techniques through the use of high-resolution images taken with drones. In the future, it is considered that it will be possible to present case studies that directly utilize micro-satellites with high-precision spatial resolution.

• The KIPS Transactions:PartB
• /
• v.11B no.6
• /
• pp.653-660
• /
• 2004

Object-oriented analysis-synthesis coding (OOASC) subdivides each image of a sequence into a number of moving objects and estimates and compensates the motion of each object. It employs a motion parameter technique for estimating motion information of each object. The motion parameter technique employing gradient operators requires a high computational load. The main objective of this paper is to present efficient motion parameter estimation techniques using the hierarchical structure in object-oriented analysis-synthesis coding. In order to achieve this goal, this paper proposes two algorithms : hybrid motion parameter estimation method (HMPEM) and adaptive motion parameter estimation method (AMPEM) using the hierarchical structure. HMPEM uses the proposed hierarchical structure, in which six or eight motion parameters are estimated by a parameter verification process in a low-resolution image, whose size is equal to one fourth of that of an original image. AMPEM uses the same hierarchical structure with the motion detection criterion that measures the amount of motion based on the temporal co-occurrence matrices for adaptive estimation of the motion parameters. This method is fast and easily implemented using parallel processing techniques. Theoretical analysis and computer simulation show that the peak signal to noise ratio (PSNR) of the image reconstructed by the proposed method lies between those of images reconstructed by the conventional 6- and 8-parameter estimation methods with a greatly reduced computational load by a factor of about four.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.10
• /
• pp.6296-6302
• /
• 2014

A new technique, which can increase the channel bandwidth in an optical wireless orthogonal frequency division multiplexing (OFDM) link based on a light emitting diode (LED), is proposed. The technique uses adaptive sampling to convert an OFDM signal to a sparse waveform. In compressive sensing (CS), a sparse signal that is sampled below the Nyquist/Shannon limit can be reconstructed successively with sufficient measurements. The data rate of the proposed CS-based visible light communication (VLC)-OFDM link increases from 30.72 Mb/s to 51.2 Mb/s showing an error vector magnitude (EVM) of 31 % at the quadrature phase shift keying (QPSK) symbol.

• Journal of Biosystems Engineering
• /
• v.15 no.4
• /
• pp.319-327
• /
• 1990

시스템의 적응 제어함수를 산출하는 네트워크인 소뇌모델 선형조합 회로망을 이용한 학습제어 기법은 시스템에 영향을 주는 제어인자들의 불확실성 및 모델링의 결여에도 불구하고 오히려 안정한 실시간 제어의 구현을 가능하게 함으로써 대단한 관심을 불러 일으켜 왔다. 그러나, 센서로부터의 정보처리와 인식 그리고 복잡한 비선형 시스템의 제어에 적용하기에는 회로망 자체의 내재적 문제점들이 여전히 남아있다. 소뇌모델 선형조합 회로망을 기지 또는 미지의 시스템 모델에 효과적으로 적용하기 위해서는 네트워크에 영향을 주는 제어인자가 시스템에 미치는 영향을 분석하는 것이 필수적이다. 분할 블럭의 크기, 학습이득, 입력편이 그리고 입력변수들의 영역과 같은 네트 제어인자들은 시스템의 학습 능률 및 소요 기억용량의 크기에 중대한 영향을 미침에도 불구하고 충분히 조사되지 못한 실태이다. 물론 이들 제어인자들의 결정에는 학습 대상이 되는 시스템 함수의 형태와 적용 학습 알고리즘이 반드시 고려되어야 한다. 본 논문에서는 학습 능률성에 미치는 이들 제어인자들의 상호영향도를 저자가 제안하였던 기본 학습 알고리즘에 의거하여 조사하였다. 분석적인 방법만으로 이러한 상호영향성을 조사하기는 매우 힘들거나 거의 불가능하다고 보아지기 때문에 학습 대상함수를 먼저 규정하여 다양한 컴퓨터 모의시험을 수행하였고 그 결과를 분석하였다. 컴퓨터 모의시험의 결과에 의하여 회로망의 시스템 적용시 고려할 설계 지침을 제시하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.6
• /
• pp.623-632
• /
• 2013

Electromagnetic topology simplifies a complex analysis area in accordance with electromagnetic coupling. And then electromagnetic topology divides the simplified continuous area into sub-areas and analyzes electromagnetic problems at the sub-areas. Therefore electromagnetic topology has a merit to analyze the electromagnetic coupling in large and complex systems, however simplified modeling technique can generate large errors. In this paper, power balance method is used to estimate errors and subdivide junctions in the electromagnetic topology. The method is applied to analyze conducted and radiated electromagnetic coupling in two kinds of cavity models. Improvement of accuracy was accomplished in accordance with junction subdivision. Moreover we could save computation time and memory comparing with FDTD results.