• Journal of the Korean Magnetics Society
• /
• v.5 no.3
• /
• pp.203-209
• /
• 1995

A study of the dependence of the magnetoresistance in $glass\[Cu_{x\AA}\NiFe_{50\AA}\Cu_{x\AA}\Co_{50\AA}](X;\=\;8,\;10,\;14,\;18,\;22,\;26,\;28,\;38,\;48,\;58\;\AA,\;N\;=\;2,\;3,\;4,\;10,\;20)$ multilayers prepared by dc magnetron sputtering on the interlayer thickness of Cu (X), the number of multylayer(N) and annealing temperature has been performed. Resistance measurement were made by four terminal method, and the magnetic field applied to perpendicular and parallel for the current. The maximum magnetoresistance(MR) ratio(%) was appeared in the vicinity of $10\;\AA$ in Cu layer, and it was oscillated with the thickness of Cu. The MR ratio was increased with the number of layers N, however the ratio for the N = 4 layers decreased rather than the N = 3 layers. The dependence of the ratio on the annealing temperature was increased to $250^{\circ}C$.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.5
• /
• pp.31-38
• /
• 2018

The effects of polymer-binder ratio and metakaolin content on the properties of ultrarapid-hardening polymer-modified concretes using metakaolin are examined. As a result, regardless of the metakaolin content, the flexural, compressive and adhesion in tension strength of the ultrarapid-hardening polymer-modified concretes tend to increase with increasing polymer-binder ratio. Regardless of the polymer-binder ratio, the strengths of the ultrarapid-hardening polymer-modified concretes increase with increasing metakaolin content, and reaches a maximum at metakaolin content of 5%. The water absorption, carbonation depth and resistance of chloride ion penetration of the ultrarapid-hardening polymer-modified concretes decrease with increasing polymer-binder ratio. The resistance of freezing and thawing improvement is attributed to the improved bond between cement hydrates and aggregates because of the incorporation of polymer dispersion.

• Journal of Life Science
• /
• v.21 no.9
• /
• pp.1295-1300
• /
• 2011

The AtPGR gene is induced by pathogen infection, jasmonic acid and salicylic acid treatment and may therefore play a role in plant defense responses. Arabidopsis thaliana Plasma membrane Glucose-responsive Regulator (AtPGR) was previously isolated from Arabidopsis, which confers glucose insensitivity on plants. To study its biological functions directly, we have characterized both loss-of-function RNAi mutant and gain-of-function transgenic overexpression plants for AtPGR in Arabidopsis. The AtPGR-overexpressing plants displayed enhanced resistance to a virulent strain of the bacterial pathogen Pseudomonas syringae as measured by a significant decrease in both bacterial growth and symptom development as compared to those in wild-type and RNAi plants. The enhanced resistance in the gain-of-function transgenic plants was associated with increased induction of SA-regulated PDF1.2 and JA-regulated PR1 by the bacterial pathogen. Thus, pathogen-induced AtPGR plays a positive role in defense responses to P. syringae.

• Journal of Plant Biotechnology
• /
• v.38 no.1
• /
• pp.54-61
• /
• 2011

Antisense construct of cDNA for senescencerelated ACC oxidase (CAO) cDNA isolated from carnation flowers were introduced into tobacco by Agrobacteriummediated transformation. The decreasing expression of NtACO and the reduction of ethylene production were observed in these transgenic lines. In contrast, the SAMDC transcripts and spermidine content were increased. The findings that higher content of spermidine in the ethylene suppressed transgenic plants compared with wild-type should be directly resulted in the enhancement of SAMDC activity followed by the increased accumulation of SAMDC transcript. To investigate the pathogenic response in these transgenic plants, wild-type and transgenic plants were inoculated with Phytophthora parasitica pv. nicotianae. Transgenic plants suppressing ethylene production showed the increased resistance against fungal pathogen, comparing with wild-type plant. PR-protein genes expression in CAO-AS-2 and CAOAS-4 were also higher at the normal growth condition and pathogenic response than in wild-type plants. The results of higher spermidine content and SAMDC activity in transgenic plants, CAO-AS-2 and CAO-AS-4, support the possibility that an increase in spermidine content might induce the higher transcripts of PR-protein genes. This results agreed with the phenomena that spermidine promoted the expression of PR1a and a SAMDC inhibitor, MGBG, decreased the expression of PR1a in leaf discs. These results suggest that the resistance against fungal pathogen in transgenic tobacco impaired in ethylene production might be caused by increasing in polyamine, especially spermidine, biosynthesis.

• Journal of Bio-Environment Control
• /
• v.22 no.4
• /
• pp.316-321
• /
• 2013

This study was carried out to analyze heat transfer characteristics and heat flow through air-inflated double layer PO film with thermal resistance method. The experiments was conducted in the laboratory controlled air temperature between 258.0 K and 278.0 K. The experimental materials were made up two layers PO film and an inflated-air layer. The thickness of air-inflated layer was fixed at 3 types of 110, 175, 225 mm. The electrical circuit analogy for heat transfer by conduction, radiation and convection was introduced. Experimental data shows that the dominant thermal resistance in heat transfer through the air-inflated double layer film was convection. Calculation errors were 1.1~18.5 W for heat flow. In result, the method of thermal resistance could be introduced for analysis of heat flow characteristics through air-inflated double layer film.

• Korean Journal of Environmental Agriculture
• /
• v.14 no.3
• /
• pp.319-328
• /
• 1995

This study was carried out to investigate the resistance mechanism by three different kinds of procymidone-resistant and susceptible isolates of Botrytis cinerea which had been collected from green houses. The average resistance level of the resistant strains was 1,000 times higher than that of susceptible ones. Also, it was revealed that the resistance was not originated from components excreted by Botrytis cinerea, based on the result obtained from the treatment with piperonyl butoxide and triphenyl phosphate as an inhibitor of monooxygenase and esterase, respectively. The total lipod content of resistant strains was 1.3 times higher than that of susceptible ones, among fatty acids, palmitic acid, stearic acid, and linoleic and being 3.0, 2.5, and 2.0 times higher, respectinely. Also slight differences in sterol contents and components were observed. The crude chitin content was slightly higher in susceptible strains but contents of N-acetyl glucosamine, a hydrolysate of chitin, were about 2 times higher in resistant ones.

• Korean Journal of Materials Research
• /
• v.6 no.2
• /
• pp.145-152
• /
• 1996

태양전지의 앞면전극으로 사용될 SnO2박막을 spray pyrolysis 방법으로 증착하여 증착조건에 따른 박막 특성을 연구하였다. 증착온도가 증가함에 따라 SnO2박막의 우선방위가 (200)면에서 면밀도가 더 높은 (211), (110)면으로 바뀌었고 막의 미세구조도 거칠고 각진 구조에서 평탄한 구조로 변하였다. 또한 더 안정된 결정면 성장과 온도 증가에 의해 CI, F 등의 불순물 흡착이 어려워져 전자 전하농도가 감소하고 비저항 값이 증가하였다. 특히 50$0^{\circ}C$ 이상에서는 전하농도가 크게 감소하여 비저항이 크게 증가하였다. NH4F/Sn=2.3인 용액으로 40$0^{\circ}C$에서 증착된 SnO2박막은 약 90%이상의 광투과도를 갖고 균일한 도핑으로 인해 약 4$\times$10-4$\Omega$ .cm의 낮은 비저항 값을 나타내었다. 두께에 따른 판저항과 광투과도의 상반된 효과를 고려한 figure of merit으로부터 투명전극으로써 가장 적절한 두께는 약 500nm이었다.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2005.04a
• /
• pp.226-230
• /
• 2005

This paper presents the actuation performance of a conducting shape memory polyurethane (CSMPU) actuator. We introduced a concept of shape memory polyurethane activated by electric power while conventional shape memory polyurethanes are activated by external heat source. A conducting shape memory polyurethane actuator was manufactured by adding cabon nano-tube to conventional shape memory polyurethane. The main problem of the previous CSMPU was bad dispersion of carbon nano-tubes in polyurethane. In this paper, we have tried to find manufacturing method to solve the dispersion problem. With a lot of elaborative works, we have developed conducting shape memory polyurethane actuator with good electrical performance. The actuation performance of the developed conducting shape memory polyurethane actuator was measured and assessed.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.14 no.2
• /
• pp.181-192
• /
• 2001

이 논문은 샌드위치식 강-콘크리트 복합구조체에서 상하 강판과 격벽으로 구성되는 셀의 형상비가 거동과 성능에 미치는 영향을 다루었다. 이 구조체에서 셀 형상비는 하중전달 메카니즘과 하중분배능력을 변화시킨다. 따라서 셀 형상비에 따라 부재의 응력수준과 하중저항능력이 변화한다. 이 연구에서는 셀 형상비가 이 구조체의 거동과 성능에 미치는 영향을 규명하기 위해, 두 종류의 샌드위치식 복합구조체에 대해 다양한 셀 형상비를 설정하여 비선형 구조해석을 수행하였다. 해석결과로부터 셀 형상비에 따른 하중전달 메카니즘과 부채 응력에서의 차이점을 도출하였으며, 이들 차이점을 바탕으로 셀 형상비가 전단성능, 휨성능, 하중저항성능에 미치는 영향을 분석하였고, 파괴모드와 연성에 미치는 영향에 대해서도 간략히 언급하였다. 연구결과, 셀 형상비가 증가함에 따라 하부 강판과 콘크리트의 응력수준이 낮아지는 결과를 나타내었다. 이것은 각 부재의 유효휨강성과 유효전단강성 증가를 나타내며, 따라서 구조체의 하중저항성능도 향상되는 것으로 판단된다. 특히 셀 형상비의 증가에 따른 성능향상에서 전단성능이 휨성능에 비해 더 큰 효과를 나타내며, 이러한 차이는 파괴모드와 연성에도 영향을 미칠 것으로 판단된다. 즉, 셀 형상비가 증가함에 따라 구조물의 거동 및 파괴모드는 점차적으로 전단에서 휨으로 변화하고, 이에 따라 구조물의 연성도 점차적으로 향상될 것으로 판단된다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.63.1-63.1
• /
• 2011

현재 상용 중인 터치패널의 전도성 필름으로는 ITO가 주로 사용된다. 하지만, 디스플레이 기기의 수요 증가와 Indium의 고갈로 인한 ITO의 수요 공급 불균형으로 인한 원가 문제가 대두되고 있다. 이 때문에, Carbon nanotube (CNT), Graphene 등의 대체 투명 전도성 물질들이 연구 중에 있지만 투과율 및 저항 문제 등이 문제가 되고 있다. 본 연구에서는 투명 전도성 필름의 광 투과도 향상을 위하여, 자외선 경화 레진을 이용하여, 전도성 필름 상에 모스 아이 레진 패턴을 형성하는 실험을 진행하였다. 패턴이 형성된 이후에는 Scanning Electro Microscope를 통하여 패턴의 형성 유무를 관찰하였고, UV-vis와 4-point probe를 이용하여 투과도 및 저항을 측정하였다. 실험 결과 모스아이패턴을 필름에 패터닝 함으로써, 전체적으로 투과도가 증가된다는 것을 확인 할 수 있었으며, 투과도의 증가폭은 단면 패터닝보다는 양면 패터닝을 한 경우가 높았다. 그리고 저항 변화에 있어서는 패턴이 있는 부분의 경우 표면 잔여층으로 인하여 급격하게 증가하였지만, 전도면 반대편에 패터닝을 진행한 경우 거의 변화하지 않았다는 것을 확인할 수 있었다. 결과적으로, 본 연구를 통해 나노 임프린트 리소그래피를 통해 전도성 폴리머 필름 상부에 모스아이나노 구조물을 제작하였고, 이를 통해 기존의 전도성 폴리머 필름의 낮은 투과율을 향상시킬 수 있었다.