• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.358-358
• /
• 2012

최근 기후변화의 영향에 따라 강수량과 증발산량이 변하는 경향을 보이고 있으며, 그에 따라 유출량도 변하고 있다. 따라서 기후변화가 수자원에 미치는 영향도 커지고 있으며, 댐 유역의 유출량 산정은 홍수나 용수의 확보측면에서 중요시 되고 있다. 탱크모형은 일본의 Sugawara가 1961년 처음 개발한 모형으로 유역을 오리피스 유출공을 가진 저류형 수조의 조합으로 가정하여 유량을 산정하는 유출모형으로 매개변수가 많고, 이들을 시행착오로 결정해야 하기 때문에 숙련된 경험이 요구되는 단점이 있으나 계산법이 명확하고 수문현상을 잘 재현한다는 장점이 있다. 탱크에는 강수량, 유출량, 그리고 증발량과 같은 입력 자료가 필요하며, 정확한 실제 증발산량 값을 알기는 어렵기 때문에 물수지를 이용해 증발산량을 계산하여 사용하고 있지만 유출량 미계측 지역에서는 사용이 어렵다. 그러므로 태양복사에너지, 온도, 바람, 기압, 습도와 같은 기상학적 인자에 따라서 잠재증발량을 산정하여 탱크 모형의 입력 자료로 사용한다면, 유출량자료가 없는 유역에서도 탱크모형을 사용하여 유출량을 산정할 수 있을 것으로 사료된다. 본 연구에서는 섬진강댐유역과 합천댐유역의 유출량 산정을 위해 잠재 증발산량 산정식(Penman, FAO P-M, Makkink, Preistley-Taylor, Hargreaves)을 적용하여 Tank 모형 매개변수들의 민감도분석을 수행하였다. 섬진강댐은 전북 임실군 강진면 옥정리와 정읍시 산내면 종성리 사이에 있으며, 유역면적은 $763km^2$, 댐 높이는 64m, 제방길이 344.2m 댐으로 매개변수 민감도 분석 적용기간은 1975년~1992년이다. 합천댐은 경상남도 합천군 대병면 회양리에 있는 댐으로 높이 96m, 길이 472m, 유역면적 $925km^2$의 다목적 댐이며, 매개변수 민감도 분석 적용기간은 1989년~1999년이다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.1B
• /
• pp.63-70
• /
• 2011

To install the side weirs in inlet of washland construction, it is necessary to calculate more accurately the discharges over side weir. In this study, the hydraulic experiments were performed in broad crested side weirs that installed trapezoidal channel and that considered more applicable to the actual river. Upstream Froude number in the main channel and weir height, length, width and slope of main channel were considerd for estimation of discharge coefficient of broad crested side weir. Experimental results show that the discharge coefficient of broad crested side weir depend on, and. New estimated equation for the discharge coefficient are suggested through the multiple regression analysis and its applicability is confirmed by comparing estimated and measured discharges over side weirs.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.27-27
• /
• 2020

샌드댐은 주로 건조지역에서 홍수시 유량을 차단시켜 유송토사와 함께 유입된 물을 장기간 보관함으로써 모래와 물이 함께 저장되며 모래속에 저장된 물을 취수하는 방식의 특수한 저류 구조물이다. 우리나라에서는 아직 적용된 바 없으나 상수도 미급수 지역인 계곡부에서 물을 모래안에 저장하게 되면 증발로부터 오래 견딜 수 있는 장점을 활용할 수 있을 것이다. 본 연구에서는 이와 같은 계곡부 샌드댐의 실제 가뭄시 물공급 신뢰도를 평가하기 위한 분석을 수행하였다. 분석 대상지역은 춘천 서상리로 물공급 능력을 평가하기 위해 유역수문모형 SWAT-K와 저수지 유출추적을 결합한 모의모형을 개발하고 이를 적용하였다. 샌드댐의 제원을 다양하게 고려하여 최적 설계 인자를 도출하기 위해 폭, 높이, 길이 등 구조물의 제원을 다양하게 변경하며 물공급 신뢰도 95 %를 만족할 수 있는지 평가하였다. 일반적인 댐의 이수안전도 평가시에는 분석 단위기간을 5일, 10일로 하고 있으나, 본 연구에서는 유역면적이 작은 관계로 분석 단위기간을 1일로 설정하였다. 총 9년간의 분석을 수행하였고, 5 %에 해당하는 연간 약 18일의 물공급 부족이 발생하는 신뢰도를 기준으로 일 취수량 20-50 ㎥을 적용하였을 때의 물수지 분석을 수행하여 샌드댐과 기존 취수보의 규모에 따른 물공급 능력을 평가하였다.

• Journal of the Korean Geographical Society
• /
• v.43 no.3
• /
• pp.263-275
• /
• 2008

This Study deals with the comparative analysis on the estimation of surface soil erosion volume between South and North Korea using RUSLE model in Imjin River basin located on DMZ of Central Korea. Comparatively North Korea areas have been more eroded three times as much as South Korea parts. Because of cropland development such as com Held in the hillslope, in North Korea, more surface soil erosion and transportation to the river bed has given rise to frequent flood hazards. It seems that the study can dedicate to mitigation of environmental problems such as soil erosion and flooding in unaccessible Imjin River basin located on DMZ.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.5 no.2
• /
• pp.41-50
• /
• 1985

The mathematical analysis of the outflow hydrograph resulting from earth dam-break was studied. DBFW(Dam Break Flood Wave) model based on the breach mechanism and reservoir storage equation was developed and was applied to the Teton and Buffalo-Creek dam. The modeling results showed that the shape of outflow hydrograph, peak discharge and failure duration time had a good agreement with the data analyzed by NWS. The breach mechanisms which exert influence on the outflow hydrograph were consisted of geomorphological characteristics of the reservoir, breach mode, breach width and failure duration time. The earth dams in Korea were classified into four types by the reservoir geomorphology, and water surface elevation-failure duration time-peak discharge relationships were also presented. The methodological procedure made in this paper will provide a basic contribution to dam-break study in river system.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.5 no.2
• /
• pp.70-80
• /
• 2003

We report the first direct measurement of $CO_2$ flux over Kwangneung broadleaf deciduous forest, one of the tower flux sites in KoFlux network. Eddy covariance system was installed on a 30 m tower along with other meteorological instruments from June to August in 2002. Although the study site was non-ideal (with valley-like terrain), turbulence characteristics from limited wind directions (i.e., 90$\pm$45$^{\circ}$) was not significantly different from those obtained at simple, homogeneous terrains with an ideal fetch. Despite very low rate of data retrieval, preliminary results from our analysis are encouraging and worthy of further investigation. Ignoring the role of advection terms, the averaged net ecosystem exchange (NEE) of $CO_2$ ranged from -1.2 to 0.7 mg m$^{-2}$ s$^{-1}$ from June to August in 2002. The effect of weak turbulence on nocturnal NEE was examined in terms of friction velocity (u*) along with the estimation of storage term. The effect of low uf u* NEE was obvious with a threshold value of about 0.2 m s$^{-1}$ . The contribution of storage term to nocturnal NEE was insignificant; suggesting that the $CO_2$ stored within the forest canopy at night was probably removed by the drainage flow along the hilly terrain. This could be also an artifact of uncertainty in calculations of storage term based on a single-level concentration. The hyperbolic light response curves explained ＞80% of variation in the observed NEE, indicating that $CO_2$ exchange at the site was notably light-dependent. Such a relationship can be used effectively in filling up the missing gaps in NEE data through the season. Finally, a simple scaling analysis based on a linear flow model suggested that advection might play a significant role in NEE evaluation at this site.

• The korean journal of orthodontics
• /
• v.36 no.5
• /
• pp.339-348
• /
• 2006

Objective: With development of the skeletal anchorage system, orthodontic mini-implant (OMI) assisted on masse sliding retraction has become part of general orthodontic treatment. But compared to the emphasis on successful anchorage preparation, the control of anterior teeth axis has not been emphasized enough. Methods: A 3-D finite element Base model of maxillary dental arch and a Lingual tipping model with lingually inclined anterior teeth were constructed. To evaluate factors influencing the axis of anterior teeth when OMI was used as anchorage, models were simulated with 2 mm or 5 mm retraction hooks and/or by the addition of 4 mm of compensating curve (CC) on the main archwire. The stress distribution on the roots and a 25000 times enlarged axis graph were evaluated. Results: Intrusive component of retraction force directed postero-superiorly from the 2 mm height hook did not reduce the lingual tipping of anterior teeth. When hook height was increased to 5 mm, lateral incisor showed crown-labial and root-lingual torque and uncontrolled tipping of the canine was increased.4 mm of CC added to the main archwire also induced crown-labial and root-lingual torque of the lateral incisor but uncontrolled tipping of the canine was decreased. Lingual tipping model showed very similar results compared with the Base model. Conclusion: The results of this study showed that height of the hook and compensating curve on the main archwire can influence the axis of anterior teeth. These data can be used as guidelines for clinical application.

• Journal of Environmental Impact Assessment
• /
• v.24 no.3
• /
• pp.278-286
• /
• 2015

Pilot scale system was designed to identify the growth and movement of algae, depending on environmental changes(retention time, nutrient concentration, etc) in Gangjeong-Goryeong Weir of the Nakdong River. Considering the stability of algal culture and easy observation of algal growth, pilot scale system was made of transparent acrylic material(3 sets of flexible cylindrical water tanks with 1 m diameter and 4 m height). Auxiliary equipments include light intercepter, water inflow device for different water depth and storage of reclaimed water. The retention time was 2 days(before construction of weir; treatment 1), 8 days(after construction of weir, 2013; treatment 2) and 30 days(2014; treatment 3). According to the water temperature of treatment 1 were similar by depth, treatment 3 showed a difference between the surface(0 m) and bottom(4 m) more than $3^{\circ}C$. DO, pH showed relatively high in the surface than the bottom. Nutrients showed eutrophic condition in all experiments. The Chlrophyll-a concentration of the treatment 1 showed a relatively lower value than the Chlrophyll-a concentration of the treatment 2 and 3. Therefore, the retention time was considered to influence the growth of phytoplankton.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.11 no.1
• /
• pp.27-38
• /
• 2009

The multi-level profile system is designed to measure the vertical profile of $H_2O$ and $CO_2$ concentrations in the surface layer to estimate the storage effects within the plant canopy. It is suitable for long-term experiments and can be used also in advection studies for estimating the spatial variability and vertical gradients in concentration. It enables the user to calculate vertical fluxes of water vapor, $CO_2$ and other trace gases using the surface layer similarity theory and to infer their sources or sinks. The profile system described in this report includes the following components: sampling system, calibration and flow control system, closed path infrared gas analyzer(IRGA), vacuum pump and a datalogger. The sampling system draws air from 8 inlets into the IRGA in a sequence, so that for 80 seconds air from all levels is measured. The calibration system, controlled by the datalogger, compensates for any deviations in the calibration of the IRGA by using gas sources with known concentrations. The datalogger switches the corresponding valves, measures the linearized voltages from the IRGA, calculates the concentrations for each monitoring level, performs statistical analysis and stores the final data. All critical components are mounted in an environmental enclosure and can operate with little maintenance over long periods of time. This report, as a practical manual, is designed to provide helpful information for those who are interested in using profile system to measure evapotranspiration and net ecosystem exchanges in complex terrain.

• The Journal of Engineering Geology
• /
• v.28 no.3
• /
• pp.465-473
• /
• 2018

The application of singular value decomposition (SVD) filtering is examined for attenuation of the ground-roll in land seismic data. Prior to the SVD computation to seek singular values containing the highly correlatable reflection energy, processing steps such as automatic gain control, elevation and refraction statics, NMO correction, and residual statics are performed to enhance the horizontal correlationships and continuities of reflections. Optimal parameters of SVD filtering are effectively chosen with diagnostic display of inverse NMO (INMO) corrected CSP (common shot point) gather. On the field data with dispersion of ground-roll overwhelmed, continuities of reflection events are much improved by SVD filtering than f-k filtering by eliminating the ground-roll with preserving the low-frequency reflections. This is well explained in the average amplitude spectra of the f-k and SVD filtered data. The reflectors including horizontal layer of the reservoir are much clearer on the stack section, with laminated events by SVD filtering and subsequent processing steps of spiking deconvolution and time-variant spectral whitening.