• Geotechnical Engineering
• /
• v.2 no.3
• /
• pp.51-66
• /
• 1986

The design of fabric reinforced retaining wall structure was discussed in this article. It was confirmed that the reinforced retaining earth wall which was designed by new theoretical formulae developed this time was stable structurally and economically. The plastic fabric filter which was placed in layers behind the facing element reduced the lateral earth pressure on the wall elements in comparison with a conventional retaining earth walls. The reinforcing characteristics of earth wall was governed by the spacing of fabric layers, effective length of fabrics, particle distribution and compaction, and thus it is essential that, in the construction field, the reinforcing strips should be selected in order to develop the maximum friction forces bet.eon soil and fabric filters. The maximum tensile stress developed from the reinforcing strips was appeared at a little far distance from the back of skin element and it was not well agreed with the Rankine's theory but distributed well as a symmetrical shape against the point of the maximum tensile stress. The total length of the different layers should be sufficient so that the tension in the fabric strip could be transferred to the backfill material. Also the total stability of reinforced earth wall should be checked with respect to a failure surface which extended blond the different lathers.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.42 no.1
• /
• pp.53-61
• /
• 2015

This study was conducted for the purpose of evaluating the stainless steel crowns on extracted primary molars and thus identifying frequent errors and defects. Visual assessment and micro-computed tomography (micro-CT) image analysis were performed on 97 primary molars for evaluation of the state of marginal adaptation, cement loss, secondary caries, ledge formation, attritive perforation and marginal polishing defect. The results were as follows: In the examination of object teeth by evaluation criteria, cement loss was found most frequently (98%), followed by secondary caries (42.3%), marginal polishing defect (41.2%), ledge formation (29.9%) and attritive perforation (17.5%), in this order. The cement loss at the margins showed a significant relationship with marginal gap and secondary caries: the larger the marginal gap is, the more frequent is the cement loss (p < 0.05). The average marginal gap was $0.31{\pm}0.26mm$ and showed the highest value in the maxillary 2nd primary molars. The location of the crown margin above the cementoenamel junction was found most frequently and it was found that the higher the crown margin is located, the less the marginal gap becomes (p < 0.05). In conclusion, it is thought very desirable to pay closer attention to crown margins and shapes for stainless steel crown restoration in order to minimize the marginal gaps and consequent cement loss.

• 보존과학연구
• /
• s.32
• /
• pp.25-35
• /
• 2011

Wood vinegar and Asarum sieboldii Miquel were selected as candidate materials showed antimicrobial activity and insect repellent activity. These natural pesticides have its own color and these could cause color difference on fabric materials. In the present study, we investigated the color difference of undyed and dyed fabrics to evaluate negative effect of wood vinegar and A. sieboldii Miquel. Undyed and dyed fabrics were exposed to natural pesticides of various concentrations for six months in relative humidity 70% and temperature $28^{\circ}C$. After exposure of pesticides, color difference (${\Delta}E*$) were investigated at two weeks intervals for six months. As a results, dyed cotton, silk and undyed silk fabrics exposed wood vinegar were not nearly changed in their colors, but color of only undyed cotton fabric was clearly changed by wood vinegar. Especially color difference by wood vinegar on undyed cotton fabric was most distinct as the concentration increased. On the other hand, all of fabrics exposed A. sieboldii Miquel were not nearly changed in their colors for six months. Therefore, this study first suggests that wood vinegar and A. sieboldii Miquel as natural insecticides could be used to conserve for textile cultural properties from insects and microorganism, but wood vinegar couldn't use the high concentration on undyed cotton fabric.

• Journal of Korean Society of Transportation
• /
• v.21 no.5
• /
• pp.97-110
• /
• 2003

The sight distance at unsignalized intersections is the one of the fundamental geometric design elements, and can ensure safety and efficient operations. Despite its importance, little research attention has been directed in Korea compared to developed countries such as European countries, the United States, and Japan. AASHTO ISD policies have been applied to the intersection design in Korea without any revise, which can produce unrealistic and unadoptable design values. Those values are emerged from several reasons because the AASHTO ISD has been calibrated based on the local data. Therefore the ISD hardly takes into account the local characteristics of Korea such as driving behavior. vehicular movement and roadway conditions. The objective of this study is to calculate the appropriate ISD values for unsignalized intersections in the urban area in Korea. In this study, we employed the ISD model of AASHTO(2001), which is based on gap acceptance theory and can account for and take the driving and roadway conditions in Korea into consideration. The approach can also consider the complex driving maneuvers at the intersections in a proper and simple manner. The results in this study show that the ISD design criteria currently used in Korea are more conservative(safer) than those of the USA. In other words, the ISD using field data collected in this study has generally smaller values than those in USA.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.12
• /
• pp.1335-1341
• /
• 2011

The purpose of this research is to investigate how separated and reattached flow affects mass transfer, by comparing the local mass transfer characteristics on an inclined flat plate with those on a parallel flat plate. The local mass transfer coefficients for the flat plate were measured using the naphthalene sublimation technique; the inclined angle of the flat plate was varied from $-10^{\circ}$ to $10^{\circ}$ at $5^{\circ}$ intervals, and the free-stream velocity was varied from 2m/s to 15m/s. At positive inclined angles, the local Sherwood numbers decreased gradually because the boundary-layer thickness increased. On the other hand, for negative inclined angles, the local Sherwood numbers assumed the minimum value at the separation point of the recirculation flow and the maximum value at the reattachment point. The average Sherwood numbers for both positive and negative inclined angles were lower than those in the case of the parallel plate.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.6
• /
• pp.490-497
• /
• 2010

Radial variations in the lengths of wood fibers and vessel elements in the stem of chestnut (Castanea crenata) grown in Korea were investigated to get some fundamental information for efficient use of wood. Seven chestnut cultivars (Tanzawa, Ibuki, Arima, Ginyose, Tsukuba, Riheiguri, and Mansung) were examined in this study. The lengths of wood fibers and vessel elements were measured and analyzed by an optical microscope and an imaging analysis system. In all chestnut cultivars, the wood fiber length of latewood was longer than that of earlywood, and increased with the increase of growth ring number. Similarly, vessel element length of latewood was longer than that of earlywood, and showed increasing tendency with the increase of growth ring number. Consequently, it was considered that the lengths of wood fibers and vessel elements could be used for separating juvenile wood from adult wood in the chestnut stem.

• Korean Journal of Plant Tissue Culture
• /
• v.25 no.2
• /
• pp.125-129
• /
• 1998

Cucumber (Cucumis sativus L.) plants were regenerated through organogenesis and somatic embryogenesis in cotyledon and hypocotyl cultures. The shoots were efficiently formed on the basal region of cotyledons cultured on MS medium containing 1.0㎎/L zeatin and 0.1㎎/L IAA in all cultivars used. Embryogenic calli were formed on hypocotyl segments cultured on MS medium containing 1.0㎎/L 2,4-D in cv. group 'Nakhab' and maintained by consecutive subculture on the same medium every 2-3 weeks without loss of embryogenic ability. Upon transfer to MS basal medium, high frequency somatic embryogenesis was achieved easily from embryogenic callus. Regenerated plantlets through organogenesis and somatic embryogenesis were transplanted to pots and gradually acclimatized to greenhouse condition where they subsequently produced fruits.

• Journal of the Korean GEO-environmental Society
• /
• v.22 no.12
• /
• pp.59-63
• /
• 2021

This study presented the characteristics and additive effects of the grout with mixing ratio for developing of high-efficiency grouting technology under high depth conditions. The laboratory investigation were conducted with Portland cement (OPC) and micro cement (S8000-E) including viscosity experiments, particle size analysis experiments, Gel-Time experiments and uniaxial compressive strength experiments. As a result of the viscosity experiment, it was shown that OPC is advantageous in terms of viscosity, but S8000-E is suitable when considering the passage of rock joint intervals through particle size analysis. The Gel-Time experiment shows that it is not that difficult with injection as a grout material even when silica fume (SF) was applied. The strength of the cured material is improved as increase in the content of silica fium (SF). Within the range of the study, the optimal mixing ratio obtained through various experiments is S8000-E, w/c=70%, silica fium (SF)=6%, and 7 days.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.4
• /
• pp.1-7
• /
• 2002

This study deals with physical properties of Larch(Larix kaemferi Carr.) treated by steaming at temperatures above 100℃. Treatment conditions of this experiment were operated at regular intervals of 10℃ at temperature up to 130℃ for 10, 30 and 60 minutes by using the auto-clave. The Bending strength and compressive strength along the grain were slightly decreased with increasing the treating temperatures. There was no significant relations between wood strength and steaming temperatures. At the range from 120℃ to 130℃ of steaming temperature, it was considered that the change of composition and structure in cell wall was changed due to release of stresses. Water absorption characteristics were not affected by steaming temperature. In this experiment limits, it was concluded that physical properties of wood by steaming treatment were affected more largely by wood density than by treating temperature.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.137-137
• /
• 2017

현재 상용화되어 있는 온실 환경제어시스템의 S/W 및 H/W는 서로 호환이 되지 않아 농민들이 원하는 맞춤형 복합 환경 제어시스템을 운영하는데 어려움이 있다. 따라서 본 연구는 다양한 제어알고리즘 및 장비를 적용시킬 수 있는 호환성이 향상된 온실 환경 제어인터페이스 모듈 성능평가를 목표로 한다. 센서 및 제어 인터페이스 모듈 성능평가를 위해 사용된 제어 시스템은 8 bit MCU가 적용된 전용 개발보드를 사용하였고, RS-232 통신 케이블을 사용하여 온실 환경 측정 데이터 값을 PC에서 수신할 수 있도록 하였다. 또한, 창개폐기, 환풍기를 사용하여 온실 내부 온/습도 환경조성을 하였다. 실험은 정오부터 제어장비를 작동시킨 후 1시간 간격으로 총 3시간 동안의 온실 내 온/습도의 변화량을 계측하였다. 3시간 중 1시간동안의 온/습도 값의 변화량을 계측한 결과 평균값은 각각 $33.21^{\circ}C$, 34.94%이었고 표준편차는 각각 $1.44^{\circ}C$, 2.74% 이었다. 제어 알고리즘은 단순한 ON/OFF 방법을 사용 하였고 총 2가지 제어장비를 사용하였으며 모두 정상 작동 하였다. 1시간동안 온실의 온도는 $30^{\circ}C{\sim}35^{\circ}C$사이를 유지하였으며, 습도는 30%~ 40% 사이로 최초 실험 목표였던 온실 내부의 온/습도 범위를 유지하였다. 이번 실험은 ON/OFF 방법의 제어 알고리즘을 사용하였지만 더욱 정밀한 온실 환경제어를 위하여 PID, 퍼지 제어 알고리즘을 추가하여 기상환경에 따른 제어범위를 더욱 세밀화 할 수 있도록 설계한다면 제어장비에 대한 효율성이 향상될 것이라 기대한다.