• Proceedings of the Korean Society for Cognitive Science Conference
• /
• 2005.05a
• /
• pp.141-144
• /
• 2005

본 연구에서는 한국어 음성어휘의 표상이 음성정보로 이루어져 있는지 아니면 철자정보로 이루어져 있는지와, 음성어휘의 표상단위가 음절인지를 조사하였다. 연구 과제로는 형태점화기법(form priming technique)을 사용하였다. 점화 자극과 목표 자극간의 관련성 수준으로는 음운적 혹은 철자적인 것을 사용하였다. 점화 자극과 목표자극간의 간격은 50msec 이었다. 따라서 SOA 각 점화자극의 제시시간에 50msec를 합한 것이다. 연구 결과는 음운적으로 관련되어 있을 때에는 무관련 조건에 비해 느려지는 방해점화(inhibitory priming)가 나타났고 철자적으로 관련되어 있는 경우에는 촉진적점화(facilitatory priming)가 나타났다. 이런 연구 결과는 시각단어 재인 연구에서도 보이는 공통적인 현상으로 음성어휘와 시각어휘가 심성어휘표상에서는 동일한 형태를 지니고 있음을 암시한다. 또한 음운적 관련성에 의한 방해점화효과는 음운음절을 공유하고 있는 어휘 후보자간의 경쟁 때문에 나타난 것으로 해석되며, 철자관련 촉진효과는 어휘접근 전에 일어나는 과정에서 나타나는 것으로 해석된다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.200-203
• /
• 2007

Devices of junction barrier schottky(JBS) structure using 4H-SiC substrates with wide energy band gaps was designed and fabricated. As a measurement results, the device of reverse I-V characteristics was shown as more than 1000 V, its design optimum length of p-grid was $3{\mu}m$ space. In this paper, I-V characteristics was modeled by using of device fabricated process conditions parameters and it was extracted that the I-V property parameters, and it was compared and analyzed with between device parameters and model parameters.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.49-49
• /
• 2011

실리콘 태양전지에 사용되는 ZnO 박막의 특성은 적외선과 가시광선 영역에서 높은 투과도 (>80%)와 낮은 비저항(<10-2) 외에 산란(scattering)에 의한 빛의 광학적 경로(optical path) 증가로 활성층(active layer)에서의 광 흡수도 증가 및 입사광의 재반사를 방지할 수 있는 표면 형상(morphology)의 제어가 중요하다. 일반적으로 우선 배향성(preferred orientation)이 <0002>방향으로 texturing된 ZnO박막보다 <1120>방향으로 texturing된 박막이 더 우수한 광 산란 효과를 보인다. 따라서, 이 논문에서는 유기화학증착공정으로 증착한 ZnO 박막의 texture 형성에 있어 박막 증착 온도 및 원료로 사용하는 DEZ(Diethylzinc)와 H2O의 상대농도 변화에 따른 texture 방향의 변화에 대해 고찰하였다. 반응기내의 압력을 0.67 torr로고정하고 기판온도를 $90^{\circ}C$에서 $170^{\circ}C$까지 $20^{\circ}C$간격으로 증가시키고, $120^{\circ}C$에서 H2O/DEZ의 비를 0.1에서 4까지 변화시켰다. 기판온도가 증가함에 따라 ZnO박막의 texture 방향은 <0002>에서 <1120> 방향으로 변화하였다. 또한 $120^{\circ}C$에서 H2O/DEZ 비가 증가함에 따라 ZnO 박막의 texture 방향은 <0002>에서 <1120> 방향으로 변화하였다. 이에 따른 광투과, 광산란 특성과 전기적 특성의 변화를 조사하였다.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.1
• /
• pp.12-18
• /
• 2013

Existing wood decks brings out negligent accident because fastener can be pulled-out by cyclic load of pedestrians. When deck and joist are connected, it also causes the problems, which are cracking of wood decks and rapid decay by material of fastener. In this study, strength property of deck unit using reinforced plastic connector made by domestic A company was evaluated. Southern yellow pine (Pinus palustris Miller) were used for deck material. Bending strength of deck units were implemented for fastener type and joist spacing (400, 600 mm). In the result, carbon steel screw into reinforced plastic connector was the best in average bending strength(Joist spacing : 400, 600 mm). In the result of bending strength for joist-width (40, 50, 70, 80 mm), the average maximum bending strength was measured when the joist spacing was 40 mm.

• Journal of the Korean GEO-environmental Society
• /
• v.17 no.1
• /
• pp.13-19
• /
• 2016

Soft ground stabilization is needed to construct large civil facilities on the soft clay ground. Pre-loading method, which is accelerating consolidation method, is generally used to stabilize the soft ground. However, pre-loading method is required long construction period and quantities of fill material. Therefore, electro-osmosis method is used to replace pre-loading method for stabilizing the soft ground. Electro-osmosis method is disadvantageous in constructive and economic aspects because it is needed a metallic electrode. So, in order to solve the those disadvantages, plastic electrode was developed to replace metallic electrode. Plastic electrode, which is made by using nano-technology on existing Plastic Drain Board (PDB), was used to supply the electric power. In this study, therefore, the model test was conducted to confirm the effect of improvement and electrical characteristics of soft ground by spacing of plastic electrode. The result shows that the effect of improvement of soft ground was decreased up to 45% by increasing electrode spacing and electrical characteristics on the soft ground were influenced by consolidation settlement with electrode spacing.

• Proceedings of the Korea Crystallographic Association Conference
• /
• 2002.11a
• /
• pp.40-41
• /
• 2002

차세대 반도체 및 나노소자 산업에 대한 국제적 기술은 고밀도 직접화의 추세에 따라서 .게이트 산화막의 두께가 급속히 작아지는 추세이다. 지금까지 이산화규소(A1₂O₃)가 게이트 산화막으로 주로 사용되어 왔으나 점차 SiON 혹은 high k 박막으로 바뀌고 있다. 본 연구에서는 차세대 반도체 소자에 사용될 게이트 산화막 물질인 SiON 박막과 Al₂O₃박막에 대한 SE(Spectroscopic Ellipsometry)분석 모델을 확립하였고, SE 측정결과를 TEM, MEIS, XRR의 결과들과 비교하였다. SiON 박막의 굴절률 값은 Si₃N₄와 SiO₂가 물리적으로 혼합되어 있다고 가정하여 Bruggeman effective medium approximation을 사용하여 구하였다. 동일한 시료를 절단하여 TEM, MEIS, 그리고 XRR에 의하여 SiON 박막의 두께를 측정하였으며, 그 결과 SE와 XRR에 의해 얻어진 박막두께가 TEM과 MEIS의 결과 값보다 약 0.5 nm 크게 주어짐을 알 수 있었다(Table 1 참조). 본 연구결과는 비파괴적이며 비접촉식 측정방법인 SE가 2～4nm 두께의 초미세 SiON 박막의 두께와 N 농도의 상대적 값을 빠르고 쉽게 구할 수 있는 유용한 측정방법 임을 보여주었다. 기존의 게이트 산화물인 SiO₂를 대체할 후보 물질들 중의 하나인 A1₂O₃의 유전함수를 구하기 위하여 8 inch, p-type 실리콘 기판 위에 성장된 5 nm, 10 nm, 및 20 nm 두께의 A1₂O₃ 박막의 유전함수와 두께를 측정하였다. 이 시료들에 대한 SE data는 vacuum-UV spectroscopic ellipsometer를 사용하여 세 개의 입사각에서 0.75 eV에서 8.75 eV까지 0.05 eV 간격으로 측정되었다. A1₂O₃ 박막의 유전함수와 두께를 얻기 위하여 공기층/A1₂O₃ 박막/Si 기판으로 구성된 3상계 모델을 사용하였다. Si 기판에 대한 복소 유전함수는 문헌상의 값(1)을 사용하였고, A1₂O₃ 박막의 유전함수는 5개의 미지상수를 갖는 Tauc- Lorentz(TL) 분산함수(2)를 사용하였다. A1₂O₃ 박막의 경우 두께가 증가함에 따라서 굴절률이 커짐을 알 수 있었다.

• Journal of KIISE
• /
• v.44 no.2
• /
• pp.148-162
• /
• 2017

Recently, the accomplishment of a system's quality attributes requires the negotiation of increasingly complex requirements, and this is because the contextual and developmental environments in which software is used has undergone broad changes. Nevertheless, with regard to most architectural designs, many of the proportions depend on the architect's intuition. Moreover, even if reusable architectural patterns are adapted to an architectural design, common schemas for the description of their use are nonexistent, and it is difficult to make a comparison for the selection of an appropriate systemic pattern because the focus of the schemas is not the user's perspective. To achieve a fast initial-design decision, this paper suggests new schemas that reduce the distance between the quality attribute requirements and the design by reinterpreting architectural patterns from the user's perspective. Also, based on the reconstructed pattern model that is derived from the use of the new schemas, an architectural-pattern recommendation method (APOQATo) for which the trade-off and the constraints that are due to the design decision are considered is provided as well as the advantages of the architectural pattern for which the quality attributes are satisfied.

• Journal of Korean Society of Steel Construction
• /
• v.25 no.5
• /
• pp.543-553
• /
• 2013

As the deep deck plate has the shape of open cross section, It can cause structural problems such as bending torsions due to instability of the section. There are a number of fasteners types which are frequently used on light gage steel diaphragms such as bolts, rivets, welds, and screws. In this study, the structural capacity of the self drilling screw connection between the deep deck and the reinforced cap plate was evaluated by experimental variables such as the arrangement method, numbers of screw, pitch of screw, and head plate thickness.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.4
• /
• pp.174-180
• /
• 2018

In this study, the propagation characteristics of Lamb waves in anisotropic silicon wafers of (100) and (111) direction were investigated by PVDF (Polyvinylidene Fluoride) line-focused transducer. The modified V(f,z) method was used because the Lamb waves are dispersive. For confirming the anisotropy, a line-focused transducer was used and the silicon wafer was rotated 180 degrees at intervals of 1 degree. As a result, $A_0$ and $S_0$ modes were observed. The speed of $S_0$ mode according to propagation direction showed anisotropy which is associated with the crystal structure, and the speed of $A_0$ mode was isotropic. The result is consistent with the crystal structure of silicon and the mechanism of vibration of each Lamb wave modes.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.4
• /
• pp.9-15
• /
• 2001

This study deals with shear strength test for Pinus densiflora and Pinus radiata treated at above $100^{\circ}C$ by heat steam. Treatment conditions of this experiment were operated at regular intervals of $20^{\circ}C$ at temperatures up to $200^{\circ}C$ for 5, 10, 20 and 30 minutes by using the steam-explosion apparatus. It was examined, at high temperatures, degradation of some compounds from wood composition could lead to reduced the shear strength through heat steaming processes and play a large part in the plastic process of solid wood materials. It could be estimated that the shear strength of woods were gradually reduced by heat steaming time. Remarkable reduction of shear strength of woods was observed with increasing steaming temperatures above 10 minutes steaming time. Furthermore, this phenomenon shows a tendency to increase with higher temperatures. Therefore, it was considered that the softening by steaming treatment at high temperatures is necessary for the improvement on the wood processing ability.