• Membrane Journal
• /
• v.33 no.4
• /
• pp.149-157
• /
• 2023

Covalent organic frameworks (COFs) have shown promise in various applications, including molecular separation, dye separation, gas separation, filtration, and desalination. Integrating COFs into membranes enhances permeability, selectivity, and stability, improving separation processes. Combining COFs with single-walled carbon nanotubes (SWCNT) creates nanocomposite membranes with high permeability and stability, ideal for dye separation. Incorporating COFs into polyamide (PA) membranes improves permeability and selectivity through a synthetic interfacial strategy. Three-dimensional COF fillers in mixed-matrix membranes (MMMs) enhance CO₂/CH₄ separation, making them suitable for biogas upgrading. All-nanoporous composite (ANC) membranes, which combine COFs and metal-organic framework (MOF) membranes, overcome permeance-selectivity trade-offs, significantly improving gas permeance. Computational simulations using hypothetical COFs (hypoCOFs) demonstrate superior CO₂ selectivity and working capacity relevant for CO₂ separation and H₂ purification. COFs integrated into thin-film composite (TFC) and polysulfonamide (PSA) membranes enhance rejection performance for organic contaminants, salt contaminants, and heavy metal ions, improving separation capabilities. TpPa-SO₃H/PAN covalent organic framework membranes (COFMs) exhibited superior desalination performance compared to traditional polyamide membranes by utilizing charged groups to enable efficient desalination through electrostatic repulsion, suggesting their potential for ionic and molecular separations. These findings highlight COFs' potential in membrane technology for enhanced separation processes by improving permeability, selectivity, and stability. In this review, COF applied for the separation process is discussed.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.4
• /
• pp.38-53
• /
• 2022

In this article, I have summarized and reviewed the concepts and terms surrounding the stamped construction technique, focusing on earthen walls in the Three Kingdoms period. This is because confusion is caused by defining the nature of the earthen walls by using various concepts and terms for each researcher regarding the substance and construction method of the earthen walls. The stamped earth method is a representative ancient civil engineering or construction technique in which a frame is made of plates to form a fortress wall, a fence, and the base of a building, and then soil or sand is poured into it layer by layer and then stamped with a bat to make it solid. Therefore, in order to prove that the earthen wall was built by the stamped earth method, evidence such as a narrow plate, a column for fixing it, long horizontal and vertical wood pieces to support the narrow plate, and traces of pounding the soil must be detected. However, in Korea, there are very few cases where such evidence has been fully excavated, so it is necessary to agree on how strictly the standards for the stamped earth method will be applied. The terms related to the stamped technique mobilized for the construction of the earthen walls were explained with actual examples by dividing the terms related to the concept into terms related to the principle and unit of the stamped plate, and the specific stamped technology. In particular, in Pungnabtoseong Earthen wall, a variety of typical and diverse methods of building the ancient stamped earthen wall were identified so that decisive data could be secured to understand the principles and techniques of the stamped earthen wall. In the future, a more general understanding of the stamped technique will be possible only when more evidence related to it is found in relics other than Pungnabtoseong Earthen wall.

• Land and Housing Review
• /
• v.14 no.4
• /
• pp.47-62
• /
• 2023

Using the dynamic panel model, this study investigates rent determinants for small and medium-sized office buildings in Korea's CBD and Gangnam areas, key business districts. The results reveal that rents for small and medium-sized office buildings in CBD and Gangnam areas are influenced by macroeconomic fluctuations and characteristics of buildings and locations, suggesting a market with both spatial consumer and investment goods attributes. There are several investment implications as follows. First, even if the location in the CBD area is advantageous, the practical limitations in renovating aging small and medium-sized office buildings must be taken into account when investing. Second, parking conditions are a key factor influencing rent prices in CBD areas, so evaluating the parking facilities and improvement potential of small and medium-sized office buildings is essential for investors. Finally, due to the high sensitivity of Gangnam's small and medium-sized office market to macroeconomic trends, it's vital to prioritize monetary policy shifts as a key factor in investment decisions.

• Journal of Life Science
• /
• v.34 no.7
• /
• pp.493-499
• /
• 2024

Antimicrobial peptides are antimicrobial substances inherent in animals and plants, with strong antibacterial activity even in small amounts and with various other functions such as antiviral and antioxidant actions. Plants can be grown with just water and sunlight, allowing for their mass production at low costs. However, transforming a chloroplast into one that produces antimicrobial peptides, rather than growing plants, increases the amount of protein expression and minimizes contamination of the ecosystem because gene transfer by pollen does not occur. In that context, using transgenic plant chloroplasts to produce recombinant proteins increases protein degradation and reduces the solubility of proteins. To solve this problem, we fused SUMO, a fusion protein, with a recombinant protein. We also used a 6xHis tag to purify the fusion protein. The antimicrobial peptide stomoxyn is an antibacterial substance found in stable flies. Stomoxyn has an α-helix structure and is amphiphilic, which allows it to dissolve bacterial cell membranes. In this study, we constructed a transformation vector to express stomoxyn in both plant chloroplasts and Escherichia coli and used this vector to confirm the expression of stomoxyn in E. coli. The expression of the protein was then confirmed in E. coli using a transformation vector. The expressed stomoxyn was purified by nickel column and SUMOase treatment, and its antibacterial activity was confirmed using an agar diffusion assay. The EGFP gene was used to ensure that the transformed vector was inserted into the chloroplast.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.4
• /
• pp.247-256
• /
• 2013

In this study, alginate beads containing birnessite (Bir-AB), a highly reactive oxidative catalyst for the transformation of phenolic compounds, was prepared and its 1-naphthol (1-NP) removal efficiency was investigated in a batch test. Based on scanning electron microscopy image, it can be inferred that the alginate gel cluster acts as a bridge which bind the birnessite particles together. Kinetic experiment with Bir-AB of different mixing ratios of birnessite to alginate (Bir : AG=0.25 : 1~1 : 1 w/w) indicate that pseudo-first order kinetic constants, $k(hr^{-1})$ for the 1-NP removals increased about 1.5 times when the birnessite mixing ratio was doubled. The removals of 1-NP was found to be dependent on solution pH and the pesudo-first order rate constants were increased from 0.331 $hr^{-1}$ at pH 10 to 0.661 $hr^{-1}$ at pH 4. The analysis of total organic carbon for the reaction solutions showed that a higher removal of dissolved organic carbon was achieved with Bir-AB as compared to birnessite. HPLC chromatographic analysis of the methanol extract after reaction of 1-NP with Bir-AB suggest that the reaction products could be removed through incorporation into the aliginate beads as a bound residue. Mn ions produced from the oxidative transformation of 1-NP by birnessite were also removed by sorption to Bir-AB. The Bir-AB was recovered quantitatively by simple filtration and was reused twice without significant loss of the initial reactivity.

• The Korean Journal of Air & Space Law and Policy
• /
• v.26 no.1
• /
• pp.215-239
• /
• 2011

We are now entering the era of Commercial Space Transportation with the rapid commercialization of space. Commercial Space Tourism will be realized first of all in the commercial space transportation and the spacecraft is developing for it led by private enterprise such as Virgin Galatic and XCOR Aerospace. The spacecraft for space tourism is developed as Reusable Launch Vehicle(RLV). RLV Spaceship I & II manufactured by the Scaled Composites for Virgin Galatic had completed experimental flight successfully and is going to put to the operation for space travel around the year 2012. In our country, Yecheon Astro-Space Center located in Yecheon, Kyungbuk Province, signed a binding-MOU with XCOR Aerospace and going to start space travel in the year 2013 with the spacecraft LYNX MARK-II. Thus, now space travel has become a reality to us. But it is also reality that there's no study by legal basis preparing for the space tourism domestically and internationally. In this regards, this thesis dealt with legal issues related to space tourism. These are as follows : (1) the applicabe law issue that is which law between air law and space law will apply, (2) the status of space tourist issue that is space tourist can be considered as personnel of a spacecraft and/or space flight participant and has the duty to obey the order of the captain of spacecraft, (3) the responsibility of the government for the non-governmental entities such as private enterprise which involved in space tourism in case space accident occurs during the space travel, (4) license permit and supervision issue by the government (In this point, for activating the market of the space tourism, I think it is essential to guarantee the safety of the spacecraft by the government authority, though U. S. government declared that it has not certified the launch vehicle as safe for carrying crew or space flight participants), (5) registration issue, (6) space insurance issue. For all the issues mentioned above, I have studied the existing international treaties and several country's domestic law to the space by referring U.S's Commercial Space Launch Amendment Act of 2004 and New IGA of 1998 and concluded that uniform legal regime to govern these issues should be established domestically and internationally in the near future.

• Resources Recycling
• /
• v.28 no.5
• /
• pp.60-67
• /
• 2019

A valuable metal recovery from waste resources such as spent rechargeable secondary batteries is of critical issues because of a sharp increase in the amount of waste resources. In this context, it is necessary to research not only recycling waste lithium-ion batteries (LIBs), but also reusing valuable metals (e.g., Li, Co, Ni, Mn etc.) recovered from waste LIBs. In particular, the lithium hydroxide ($LiOH{\cdot}xH_2O$), which is of precursors that can be prepared by the recovery of Li in waste LIBs, can be reused as a catalyst, a carbon dioxide absorbent, and again as a precursor for cathode materials of LIB. However, most studies of recycling the waste LIBs have been focused on the preparation of lithium carbonate with a recovery of Li. Herein, we show the preparation of high purity lithium hydroxide powder along with the precipitation process, and the systematic study to find an optimum condition is also carried out. The lithium carbonate, which is recovered from waste LIBs, was used as starting materials for synthesis of lithium hydroxide. The optimum precipitation conditions for the preparation of LiOH were found as follows: based on stirring, reaction temperature $90^{\circ}C$, reaction time 3 hr, precursor ratio 1:1. To synthesize uniform and high purity lithium hydroxide, 2-step precipitation process was additionally performed, and consequently, high purity $LiOH{\cdot}xH_2O$ powder was obtained.

• The Journal of Engineering Geology
• /
• v.23 no.1
• /
• pp.29-36
• /
• 2013

The application of appropriate rehabilitation methods can improve the efficiency of clogged wells and extend their life. In this paper, we study the feasibility of well cleaning using high-voltage pulsed discharge, in which electrical energy is used to produce impulsive pressure in water, in contrast to conventional methods that employ chemical or pneumatic energy sources. This technique utilizes the compressive shock wave generated by the expansive force of hot, dense plasma that is produced during a pulsed discharge in the gap between electrodes immersed in water. Compared with conventional techniques, this method is simple, and easy to handle and control. Using a capacitive pulsed power system with an electrical energy of 200 J, an impulsive pressure of 10.7 MPa is achieved at the position 6 cm away from the discharge gap. The amplitude of the impulsive pressure was easily controlled by adjusting the charging voltage of the capacitor and was almost linearly proportional to peak discharge current. The technique achieved good results in cleaning feasibility tests with mock-up specimens similar to clogged well screens.

• Journal of Korea Foresty Energy
• /
• v.17 no.1
• /
• pp.47-55
• /
• 1998

In the search for broadband damping composites, it is desirable to have polymers with a broad and high loss region, covering the entire temperature and frequency range of interest. Interpenetrating polymer networks, IPN's, are materials composed of two or more crosslinked polymers intimately and irrevocably interwinded. The resulting distribution of microenviron-ments can result in a materials with a high mechanical loss broad end over that of either polymer component alone. In this study, several series of copolymer, crosslinked copolymer and copolymer/copolymer IPN's were synthesized for possible use as broadband damping materials. Then their dynamic tensile properties were measured and compared with the damping properties of sandwich composites. Dynamic mechanical analysis showed that the temperature of loss peak may be varied over a wide temperature range with formulation. The compatibility of IPN`s was depended on the compatibility of A and B polymers as well as crosslink density. The damping factor(tan ${\delta}_c$) of composites became greater when a polymer of approximate storage module(E`) range of 5X10$^7$ to 10$^9$ dyne/cm$^2$ and large tan ${\delta}$ at the same time was used. The damping properities of poly (2-EHA80-co-St20)/poly(2-EHA20-co-St80) IPN`s crosslinked with 3%-DEGDM were relatively better over a broad temperature range.

• Journal of dental hygiene science
• /
• v.3 no.2
• /
• pp.77-82
• /
• 2003

The purpose of this study was to examine the characteristics of dental homepages in korea to discuss how they could be improved better. The findings of this study could be described as below : First, dental homepage should include differentiated, specialized content and features. Second, the use of three-dimensional image or multimedia would contribute to increasing people's understanding of dental treatment or general dental information and elevating the effectiveness of dental publicity activities. Third, the want ad and order system used by the business sector or hospital would serve to multiply the management efficiency of dental institutions. Fourth, dental hospitals and clinics that belong to the same network or franchise need to make publicity banner for feasible mutual link, and the use of the same homepage design or common logo would be effective for better image and publicity activities. Fifth, it would be convenient to add the map search function or inquiry system. Seventh, if multiple types of services, such as entertainment or game, are prepared, it would be possible for dental institutions to project a better image and to induce visitors to hit the sites again.