• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.16 no.2
• /
• pp.108-119
• /
• 2004

The breakwater extension at Anmok Harbor has resulted in erosional stresses along the wide range of shorelines immediately south of the harbor. In this study, therefore, the downdrift affects caused by the breakwater extension are investigated through both analytical and numerical approaches. In addition, this study stresses the need of monitoring and analysis system for the effective integrated coastal zone management and shows through the case study of Anmok Harbor how the numerical experiments are accomplished for the coastal zone management. The numerical model system, which predicts the seabed changes obtained from the difference between the rates of sediment pickup and settling due to gravity, is combined with the wave, wave-induced currents, and suspended sediment transport models. A new relationship between the near-bed concentration and the depth-mean concentration, which is required in estimating the settling rates. is presented by analyzing the vertical structure of concentration.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.27 no.1
• /
• pp.9-13
• /
• 2015

Field experiment were carried out to investigate the formation of ground water flow and remediation of muddy tidal flat by installation of porous pile at the tidal flat of brackish river located in Hiroshima City, Japan. After the installation of porous pile, the concentrations of Dissolved Oxygen (DO) in the interstitial water in the porous pile increased with maximum concentration of 4 mg/L due to a formation of groundwater flow. It was observed that a increase in Oxidation Reduction Potential (ORP) and a decrease in Ignition Loss (IL) in the porous pile site and these must be caused by the increase of dissolved oxygen in the interstitial water. From these results obtained above, it is concluded that the porous pile is an effective technology for remediation of muddy tidal flats.

• Journal of Korean Society of Steel Construction
• /
• v.12 no.1 s.44
• /
• pp.55-63
• /
• 2000

This paper is a study on the behavior of Concrete-Filled Square Tubular(CFST) column to H-beam connections reinforced with external stiffeners and reinforcing bar. The cyclic loading tests of 5 test specimens were carried out. The main Parameters are as follows; 1)the length of the stiffener: 200mm, 250mm, 2)the diameter of reinforcing bar: HD16, 19. The results of the researches demonstrate that the increase of the stiffener length was more effective than the increase of the area of reinforcing bar in the point of both strength and stiffness. By reinforcing external stiffeners, stable hysteretic behavior was shown and plastic hinge was formed on the beam flange. Cold-formed tube sections should be used carefully to avoid the welding fracture at the round corners of section, and the proposed welding methods are suitable for this connections.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1378-1383
• /
• 2008

댐 저수지에서 지속적인 탁도를 유발하는 물질은 쉽게 침강되지 않는 $20{\mu}m$이하의 작은 부유물질(SS)이며, 가을 수직혼합 시기까지 침강되지 않은 부유물질은 다시 재부상하는 경우도 발생한다. 저수지내 탁수의 장기 체류는 수자원 이용과 하류하천의 수생태계에 다양한 문제를 야기하고 있어 일부 댐에서는 실시간 탁도 감시 장치를 설치하고 취수설비를 개선하는 등의 탁수저감 대책의 노력을 기울이고 있으나, 시설의 최적 운영을 지원할 수 있는 탁수 거동 및 탁도 예측에 관한 연구는 아직 부족한 실정이다. 특히, 탁도는 물 속에 존재하는 부유물질의 광학적 특성(light attenuation)을 나타내는 지표로써 SS와는 물리적인 물성이 달라 실시간 계측자료(탁도)와 모델의 모의 변수(SS)가 다른 문제점 때문에 모델링에 어려움이 있었다. 지금까지 탁도 모델링은 대부분 탁도와 SS의 상관관계를 이용하는 방법을 사용하였다. 그러나 이 방법은 탁도-SS 관계가 실측지점과 입자크기분포에 따라 달라지는 특성 때문에 변환과정에 예측결과의 불확실성이 내재한다는 지적을 받아왔다. 본 연구의 목적은 저수지로 유입한 탁수의 보다 과학적이고 정확한 탁도 예측을 위해 탁도를 유발하는 부유물질의 입자크기 분포와 공간적으로 변하는 탁도-SS의 상관관계를 고려할 수 있는 표준화된 탁도 모델링 방법을 개발하고, 실측자료를 사용하여 제시된 탁도 모델링 방법의 예측 성능을 평가하는데 있다. 부유물질의 이송-확산-침강 모델은 2차원 횡방향 평균 수리 모델과 연결(coupling)되어 수행되며, 저수지 수면을 통한 열 교환, 바람과 바닥 조도에 의한 난류혼합과 성층해석, 하천 유입수의 저수지내 밀도류 유동, 그리고 입자 크기별 부유물질의 독립침강을 해석한다. 부유입자의 크기분포와 공간적으로 서로 다른 탁도-SS 관계를 고려한 탁도 예측모델은 기존의 탁도를 종속변수로 사용한 예측 방법 또는 단일 입자크기를 사용한 모델보다 개선된 모의결과를 보여주었다. 본 연구에서 제시된 탁도 예측 알고리즘은 실시간 탁수감시와 예측 모델링, 그리고 댐 방류수 탁도 관리를 위한 선택취수 설비의 운영을 위한 의사결정지원시스템에 적용 가능할 것으로 사료된다.

• Journal of Science and Technology Studies
• /
• v.8 no.2
• /
• pp.57-81
• /
• 2008

This paper reviewed outline of Strategic Niche Management(SNM) and its usefulness and limits as policy tool. SNM is based on Multi Level Perspective(MLP) that traces technological innovation and makes transition of lock-in socio-technical system. This approach is one of systematical then traditional one, market failure approach. SNM had get a attention not only as a analytical frame of technological development, but also tool of radical innovation, although its limits of theoretical and empirical immaturity. SNM could provide a new perspective to analysis and action within urgent needs of alternative innovation policy for aging society, news energy policy for sustainable and disaster policy in danger society.

• Journal of Environmental Science International
• /
• v.20 no.3
• /
• pp.291-299
• /
• 2011

The main objectives of this research are to investigate characteristics of ozone solubility due to low solubility of conventional bubbles-ozone generators, evaluate the treatment characteristics of reclaiming textile wastewater for industrial water by means of micro/nano bubbles-dissolved ozone flotation(MNB-DOF) process. The textile wastewater used in this research was obtained from final effluent of the textile wastewater in B city. There is a 400L reactor which consists of a micro-nano bubble system and a ozone generator for experiments. As a result of generating micro-nano bubbles (below $0.5{\mu}m$) by using of MNB-DOF process, it improved ozone solubility due to higher ozone transfer rates. Consequently, the shorter ozonation time clearly indicates the lower power costs. The reported results clearly indicated that MNB-DOF process can be effectively and inexpensively. Results of the experiments through MNB-DOF process in this study satisfy all reclaiming standards as industrial water: pH 6.5~8.5, SS 10 mg/L or below, $BOD_5$) 6 mg/L or below, turbidity 10 NTU or below, Coliforms 1,000/100 mL or below. Therefore there is a possibility of the reclaiming of the textile wastewater as industrial water.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.8
• /
• pp.1230-1238
• /
• 2010

The manufacturing output of our country's marine equipment industry has enlarged due to the rapid growth of the shipbuilding industry in our country since the 1990's. But recently, the relative newcomers, BRICs, Vietnam and Turkey promote the shipbuilding industry with the government supports, but these countries will be the huge market in the marine equipments. So that, the marine equipment companies of our country should strengthen the international competitiveness, specially with the reinforcement of overseas marketing and after service. Korea Marine Equipment Association(KOMEA) established the Global Support Center in Busan to strengthen overseas marketing and technical A/S. In this paper, the more effective global A/S system and business model for marine equipment industry are suggested including the strategic action plan, considering the demands of customer and the mechanism of A/S in marine equipments.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.42 no.4
• /
• pp.395-398
• /
• 2009

This study was conducted to investigate the effects of supplemental medicinal herb mixture, laver powder and paprika powder in extruded pellet (EP) on growth and feed utilization of juvenile olive flounder. Triplicate groups of fish (average body weight of 19.6 g) were fed four experimental EPs containing 0.2% medicinal herb mixture (MHM), 1% laver powder (LP), 1% paprika powder (PP) and without supplementation (CON) for 9 weeks. Weight gain, daily feed intake, hepatosomatic index and condition factor were not influenced by dietary additives. Peed efficiency and protein efficiency ratio of flounder fed the diet containing laver powder were significantly higher than those of fish fed the medicinal herb mixture and paprika powder (P<0.05), but not significantly different from control group. The results of this study suggest that all tested additives in the dietary formulation did not affect growth and feed utilization of olive flounder.

• Land and Housing Review
• /
• v.7 no.4
• /
• pp.281-289
• /
• 2016

Structural experiment result showed that PHC(d=600mm) Pile used as a common compression member could resist 83.6 ~ 91.6 tonf of ultimate tension force, if the adhesion of P.C. bar of PHC pile to the concrete foundation is strengthened. Considering a proper safety factor to ultimate tension strength, PHC pile can substitute the anti-floating anchor, or reduce the number of anchors. For this purpose, pullout resistance behavior of a Bored pile embedded in real ground as well as structural tension strength of PHC pile must be evaluated. This study performed the static pullout tests to evaluate the pullout behavior of bored pile, and compared the test results with design value of side resistance. To evaluate the pullout resistance easily, static pullout test results were compared with dynamic loading test results using PDA. As a result, cement paste of the bored pile was hardened which is after 15 days, LH side resistance design value corresponded well to the Static pullout test results, also to the side resistance evaluated by dynamic loading test.

• Journal of Korean Society for Geospatial Information Science
• /
• v.11 no.3 s.26
• /
• pp.55-63
• /
• 2003

Korean cadastral system is primarily based on the graphical maps, thus, map reproduction by excessive shrinkage or extension, map mishandling and imperfection of surveying techniques have created cadastral non-coincident areas, which caused public distrust as well as considerable difficulties in land administration and policy making. Therefore, in this study, the methodologies for the resolution of the non-coincident problem are presented by means of a comparative analysis between cases of the non-coincident areas. The non-coincidence caused by the mismatch of parcel boundaries can be settled by introducing a coordinate-based system namely ${\ulcorner}$Integrated Land Information System${\lrcorner}$, meanwhile, those by other reasons can be done by establishing and executing a plan that can deliver the unification of the cadasoal and the land registration systems. Governmental intention and budgetary measures for securing the project expenses are essential to make this feasible. If the comprehensive improvement project is completed, the cadastral registers that define the parcel boundary, area and ownership will recover public confidence, which in turn secures land owners' rights by promoting land markets and stabilizing land prices.