• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.260-263
• /
• 2004

During the last few years, there have been many efforts on the fabrication of electronic and optical devices based on semiconductor nanowires. Room-temperature ultraviolet lasing in GaN nanowire, ultraviolet light sensing in ZnO nanowire, and dramatically improved hall mobility in Si nanowire have been demonstrated in this article. The studies on semiconductor nanowire based electronic and optical device is reviewed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.255-255
• /
• 2010

Metal-Insulator-Metal 구조의 $Al_2O_3$ ReRAM 소자를 플라스틱 기판 위에 제작하였다. $Al_2O_3$ 박막은 원자층 증착 방법으로 $150^{\circ}C$의 저온 공정에서 15nm 두께로 증착하였으며, 하부와 상부의 전극으로는 DC 스퍼터링 방법으로 증착된 백금전극을 이용하였다. 플라스틱 기판위에 제작된 $Al_2O_3$ ReRAM 소자는 unipolar 메모리 특성을 보였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.149-149
• /
• 2010

The effect of titanium (Ti) coating over the surface of carbon nanotubes (CNTs) on field emission characteristics was investigated. Since the work function of CNTs emitter is about 5.0 eV, field emission would be observed at lower voltage if this work function gets lower. Work function of Ti is approximately 4.09eV. Field emission characteristics of as-grown and Ti-coated CNTs were measured in a diode-type configuration. The resultant emission characteristics revealed that thin($50{\AA}$-thick) Ti-coated CNTs could be a better electron emitter with lower emission voltage and higher emission efficiency.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.259-259
• /
• 2010

교류 전기장에 의해 배열된 ZnO 나노선 기반의 광다이오드를 제작하고 자외선 광특성을 조사하였다. ZnO 나노선은 dielectrophoresis (DEP) force와 토크 (T)에 의하여 두 전극사이에 배열되며, silicon (Si)나노선과 접합을 하여 p-n 접합을 형성한다. 형성된 p-n 접합은 정류작용을 하는 다이오드 특성을 보이며, 자외선 입사시 전류 점멸비 (on/off ratio) $10^1{\sim}10^2$을 보이는 광다이오드(photodiode)로서 동작한다.

• 한국전기전자재료학회논문지
• /
• 제22권8호
• /
• pp.650-653
• /
• 2009

Hybrid nanofibers made of $Cu_2O$ and polyvinyl pyrrolidone were fabricated by electrospinning on glass substrates. The current magnitude of the $Cu_2O$-PVP hybrid nanofibers is 10 times larger than that of pure PVP nanofibers. In addition, $Cu_2O$-PVP nanofibers possess high sensitivity to air at room temperature than pure PVP nanifibers.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 춘계학술대회 논문집
• /
• pp.25-26
• /
• 2009

We design and demonstrate the controlled morphologies of Ag-dpped ZnO nanowires (NWs) adopting self-contrived hot-walled pulsed laser deposition (HW-PLD). p-type Ag-doping is ensuired by low temperature photoluminescence (PL) spectrum to find the AoX peak at 3.349 eV. Morphology of grown NWs are controlled by changing the kinetic energy and flux of the ablated particles with adjusting the target - substrate (T-S) distance. The analysis on the resultant NWs is presented.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 춘계학술대회 논문집
• /
• pp.33-34
• /
• 2009

Hybrid nanofibers made of $Cu_2O$ and polyvinyl pyrrolidone were fabricated by electrospinning. The current magnitude of the $Cu_2O$-PVP hybrid nanofibers is 10 times larger than that of pure PVP nanofibers. In addition, $Cu_2O$-PVP nanofibers possess high sensitivity to air at room temperature.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.256-258
• /
• 2003

Two Si wafers are bonded with indium-silver alloy using diffusion bonding method. When silver and indium thin films are contacted, they diffuse into each other and form inter-metallic compounds like $AgIn_2$, $Ag_2In$, $Ag_3In$ etc. These compounds are determined by ratio of two metals. From phase diagram of Ag-In alloy, we can get the ratio of $Ag_2In$, that has high melting point about 700$^{\circ}C$, approximately 2:1. This ratio was made by controlling of film thickness. And bonding was executed by annealing and adding pressures at a time. The joint of these wafers had been observed by SEM. And we had also seen the EDS (Energy Dispersive Spectroscopy) data to analysis the component of samples.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.505-508
• /
• 2001

Currently there is much interested in removing latent charge that is caused to latent image effect and blurring of obtained image as well as reduction of x-ray conversion efficiency in digital radiography system. To remove latent charge a-Se film is irradiated by light with 3500 lux using halogen lamp and optical fiber. We measured dark current and photosensitivity to analyze removing effect of latent charge, then compared with and without light erasing method. The reduction of measured signal due to latent charge effect was 32.5 %, and the removal effect of latent charge by using light erase method was its 95.5 %.

• 한국전기전자재료학회논문지
• /
• 제16권1호
• /
• pp.11-18
• /
• 2003

In this study we attempted to diagnose the states and properties of plasma generated while depositing SiON thin films using PECVD (Plasma enhanced chemical vapor deposition). The temperature and density of electron gases formed in a PECVD chamber were measured by Langmuir probe method. Their values were also estimated under some assumptions we made in this work. Comparison between experimental and theoretical values of the temperature and density of electron gases was made. The experimental and estimated results revealed that, as RF Power gets higher, the electron density linearly increases, but that the electron temperature does not vary.