• Applied Chemistry for Engineering
• /
• v.32 no.4
• /
• pp.403-408
• /
• 2021

In this study, a thin and flexible planar supercapacitor (PSC) was fabricated by coating polyaniline (PANI) on a screen-printed carbon electrode. Carbon ink was coated onto the flexible polyethylene terephthalate using a screen-printing method; subsequently, a thin film of PANI was coated onto the carbon surface using a dilute polymerization method. A thin flexible PANI electrode in an interdigitated structure was assembled with a polymer gel electrolyte that resulted in planar-shaped supercapacitor (PSC) devices. The as-obtained PANI/PSC was very thin and flexible, exhibiting a high areal capacitance of 409 µF/cm was obtained at a rate of 10 mV/s. This capacitance retains 46% of its original value at 500 mV/s. The flexible PANI/PSC exhibited an excellent capacitance retention of 82% even under bent states of 180° and 100 repetitive bent cycles.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2021.07a
• /
• pp.1-2
• /
• 2021

3D NAND 플래시 메모리는 플래너(2D) NAND 셀을 적층하는 방식으로 단위 면적당 고용량을 제공한다. 하지만 적층 공정의 특성상 각 레이어별 또는 셀 위치에 따라 오류 발생 빈도가 달라질 수 있는 문제가 있다. 이와 같은 현상은 플래시 메모리의 쓰기/지우기(P/E) 횟수가 증가할 수록 두드러진다. SSD와 같은 대부분의 플래시 기반 저장장치는 오류 교정을 위하여 ECC를 사용한다. 이 방법은 모든 플래시 메모리 페이지에 대하여 고정된 보호 강도를 제공하므로 물리적 위치에 따라 에러 발생률이 각기 다르게 나타나는 3D NAND 플래시 메모리에서는 한계를 보인다. 따라서 본 논문에서는 오류 발생률 차이를 보이는 페이지와 레이어를 분류하여 각 영역별로 차별화된 보호강도를 적용한다. 우리는 페이지와 레이어별로 오류 발생률이 현저하게 달라지는 3K P/E 사이클에서 측정된 오류율을 바탕으로 페이지와 레이어를 분류하고 오류에 취약한 영역에 대해서는 패리티 데이터를 추가하여 차별화된 보호 강도를 제공한다. 오류 발생 횟수에 따른 영역 구분을 위하여 K-Means 머신러닝 알고리즘을 사용한다. 우리는 이와 같은 차별화된 보호정책이 3D NAND 플래시 메모리의 신뢰성과 수명향상에 기여할 수 있는 가능성을 보인다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.158-158
• /
• 2021

도시에 불투수면적이 증가하고, 기후변화가 극심해져감에 따라 홍수 및 열섬현상과 같은 도시의 물 문제가 발생하고 있다. 이를 해결하기 위한 정책의 일환으로 우리나라의 녹색건축인증제도(Green Standard for Energy and Environmental Design, G-SEED)에서는 물순환 관리를 평가하고 있다. 하지만, 현재 G-SEED의 평가방법을 살펴보면 빗물관리시설의 설치 정도로 평가하고 있고, 강우 특성 또한 고려되고 있지 않다. 그러므로 본 연구에서는 G-SEED의 빗물관리 및 이용 항목에 대해 수문 모델을 통해 효과를 정량화함으로써 성능에 따라 평가할 수 있는 방법을 제안하였다. 빗물관리 항목에서는 유출저감률을, 빗물이용 항목에서는 빗물이용률을 평가지표로 선정하였고, 각 평가인자를 산출하기 위하여 개념모델을 적용하였다. 빗물이용시설의 경우 초기우수배제장치 용량과 필터 효율에 따른 빗물유입량의 변화와 급수인원에 따른 수요량 변화를 고려한 수문모델을 개발하였고, 수요량과 빗물저장조 용량에 따른 유출저감률과 빗물이용률을 알아보기 위해 MATLAB을 이용하여 모의해보았다. 또한, 옥상녹화의 경우에는 강우, 저류, 증발산, 유출을 고려한 수문흐름모델을 적용하였고, 토층의 두께와 배수(저장) 층의 용량에 따라 모의하여 평가기준을 선정하였다. 제안된 수문모델의 검증을 위하여 서울대학교 기숙사와 35동 옥상녹화의 실측데이터를 비교하였고, 적용성 평가를 위해 RMSE(Root Mean Square Error)와 NSE(Nash-Sutcliffe Efficiency)를 이용하였다. 본 연구에서 제안된 방법을 통해 빗물관리시설의 수문학적 성능에 따른 평가가 가능해질 것이며 설계자와 건축가들로 하여금 실질적인 효과를 내는 시설을 설치하게끔 유도할 수 있을 것이다.

• Journal of the Korean GEO-environmental Society
• /
• v.25 no.5
• /
• pp.15-19
• /
• 2024

This study aimed to develop high-efficiency grouting techniques under deep-depth conditions by experimentally verifying the applicability of various injection materials. Particle size analysis and injection model experiments were conducted with Ordinary Portland Cement (OPC) and Micro Cement (MC) to evaluate the injection performance of each material. Using Barton's Cubic Network theory, the rock fracture spacing was calculated for domestic deep-depth standards, specifically below 40 meters underground. The analysis of particle size passability under selected conditions showed that MC could pass through the rock fracture gaps, while OPC could not. According to the results of the injection model experiments using experimental devices and area calculation software, OPC failed in injection due to its larger particle size, whereas MC was capable of injection even under high-viscosity conditions. Based on these findings, the study quantitatively and visually derived the applicability of grouting materials under deep-depth conditions, and high-viscosity MC material is expected to be effective for waterproofing enhancement in deep-depth rock fracture surfaces.

• Journal of The Korean Institute of Defense Technology
• /
• v.5 no.4
• /
• pp.9-15
• /
• 2023

In this study, electric field analysis was conducted for each process as a preliminary step in the design of the electrospinning device to apply the electrospinning PVDF nanofibers to increase the filtering effect of insect screens. In the electrospinning analysis using a single nozzle, it was confirmed that there was a decrease in the electrostatic field strength as the tip's size decreased, an increase in the voltage, and no effect depending on the TCD distance. In addition, it was confirmed that the closer the distance between tips, the more electric field interference occurs, and this was found to have a more significant effect on the tip located in the center with tips on both sides. Therefore, based on these analytical results, it is believed that an increase in production speed can be expected by establishing an efficient process line by confirming the radiating area of the collector and designing the spacing between multi-nozzles through actual experiments.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.25 no.2
• /
• pp.75-81
• /
• 1989

In this paper, the authors describe on the field experiment of the newly designed actual stow net, standing on the result of the model experiment to examine the performance of the conventional net and the newly designed net, presented in two previous reports of this series. Concurrently the additional experiment to find out the possibility of changing of operating system from the side to the stern was carried out. 1. Fundamental shape of the experimented net was 20 times aslarge asthe newly designed model net. Performance of the net was detected by using two ultrasonic echo sounders: one was set downward at the top-most spreader of the shearing device to detect the opening height of the device from the sea bed, and the other sidewise at the starboard top-most spreader to detect the top-most opening width of the devices. Opening height of the newly designed net showed about 3m smaller than the conventional net at slow current of 0.6m/sec and less but it overcome 1m at speedy current of 0.8m/sec and more. Opening width of the newly designed net was 1.4 times as large as that of the conventional net, ant the front projection area of the newly designed net mouth was estimated as 1.3~1.6 times as large as that of the conventional net. 2. The experiment on the stern operating system was tightly limited by the structure of the ship employed in the experiment, which was a stern trawler of 2275 GT. The ship confronted by the wind with main anchor, while the net was put over the stern slipway and the hauling line of shearing device was operated through the top rollers of gallows. The experiment was very suggestive in the view point to mechanize the operating system, and so to decrease the man power except the following question. The of bow-stern line of ship, and that of net is much different.

• Radiation Oncology Journal
• /
• v.26 no.3
• /
• pp.181-188
• /
• 2008

Purpose: In order to enhance the efficiency of respiratory gated 4-dimensional radiation therapy for more regular and stable respiratory period and amplitude, a respiration training system was designed, and its efficacy was evaluated. Materials and Methods: The experiment was designed to measure the difference in respiration regularity following the use of a training system. A total of 11 subjects (9 volunteers and 2 patients) were included in the experiments. Three different breathing signals, including free breathing (free-breathing), guided breathing that followed training software (guided-breathing), and free breathing after the guided-breathing (post guided-breathing), were consecutively recorded in each subject. The peak-to-peak (PTP) period of the breathing signal, standard deviation (SD), peak-amplitude and its SD, area of the one cycle of the breathing wave form, and its root mean square (RMS) were measured and computed. Results: The temporal regularity was significantly improved in guided-breathing since the SD of breathing period reduced (free-breathing 0.568 vs guided-breathing 0.344, p=0.0013). The SD of the breathing period representing the post guided-breathing was also reduced, but the difference was not statistically significant (free-breathing 0.568 vs. guided-breathing 0.512, p=ns). Also the SD of measured amplitude was reduced in guided-breathing (free-breathing 1.317 vs. guided-breathing 1.068, p=0.187), although not significant. This indicated that the tidal volume for each breath was kept more even in guided-breathing compared to free-breathing. There was no change in breathing pattern between free-breathing and guided-breathing. The average area of breathing wave form and its RMS in postguided-breathing, however, was reduced by 7% and 5.9%, respectively. Conclusion: The guided-breathing was more stable and regular than the other forms of breathing data. Therefore, the developed respiratory training system was effective in improving the temporal regularity and maintaining a more even tidal volume.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.4
• /
• pp.475-483
• /
• 2012

Recently, agricultural lands decrease sharply, which was caused by urbanization, land consolidation, road construction, and innovation city construction, etc. In particular, Goyang, Chenan and Wonju city were had severe land use change. Therefore, we analyzed changes of land use, soil properties, and soil information in order to provide the basic soil information and soil management practice in these cities. The results are summarized as follows. The area of crop cultivated land in Korea (2011) was reduced to 17.3ha compared to ones from the previous year (2009). The paddy field decreased by 24.2 ha but, upland field increased by 7.0 ha. The reasons for the reduction of the paddy field were converting paddy field to upland (20.7 ha) > public facilities (3.2) ${\geq}$ building (3.2) > idle land (1.3) > and others (0.9). Other reasons for reduction in the upland field were switching upland to paddy field, (20.7 ha) > land developed (4.5) > and restoration (0.3) respectively. The main reason of converting paddy field to upland was changing from rice to more profitable upland or greenhouse crops. The cropland area (paddy fields, upland, orchard) of Goyang, Cheonan, and Wonju city were reduced to 1,466 ha, 9,708 ha and 6,980 ha respectively. The ratio of cropland area in each city was reduced by 45~25% dramatically compared to upland soil survey project in Korea (1995~1999). These data were compared with MiFAFF statistics data to use for land use cover map of Ministry of environment. But they were differences significantly. Therefore, intensive investigation should be advised throughout the utilization plan. The paddy fields located in small valley in Wonju city were changed into upland or orchard. The drainage classes of soil have been deteriorated because the flows of water were intercepted by road construction and other disturbance to water flows. In particular, paddy fields have been changed to not only upland, orchard, greenhouse cultivation but also to fallow and soil dressing on paddy in Wonju city. The soil suitability classes of paddy field in Wonju innovation city were the 3rd grade for 70.8% of the area and the 4th grade for 29.2%. The soil suitability classes of upland was the 4th grade for 88.7% of the area. Fortunately, good soil suitability classes were not belong to innovation city in Wonju. So, the good farm land should be conserved and revise the related law.

• Progress in Medical Physics
• /
• v.15 no.1
• /
• pp.1-8
• /
• 2004

Patient dose verification is one of the most Important responsibilities of the physician in the treatment delivery of radiation therapy. For the task, it is necessary to use an accurate dosimeter that can verify the patient dose profile, and it is also necessary to determine the physical characteristics of beams used in intensity modulated radiation therapy (IMRT) The Beam Intensity Scanner (BInS) System is presented for the dosimetric verification of the two dimensional photon beam. The BInS has a scintillator, made of phosphor Terbium-doped Gadolinium Oxysulphide (Gd$_2$O$_2$S:Tb), to produce fluorescence from the irradiation of photon and electron beams. These fluoroscopic signals are collected and digitized by a digital video camera (DVC) and then processed by custom made software to express the relative dose profile in a 3 dimensional (3D) plot. As an application of the BInS, measurements related to IWRT are made and presented in this work. Using a static multileaf collimator (SMLC) technique, the intensity modulated beam (IMB) is delivered via a sequence of static portals made by controlled leaves. Thus, when static subfields are generated by a sequence of abutting portals, the penumbras and scattered photons of the delivered beams overlap in abutting field regions and this results in the creation of “hot spots”. Using the BInS, inter-step “hot spots” inherent in SMLC are measured and an empirical method to remove them is proposed. Another major MLC technique in IMRT, the dynamic multileaf collimator (DMLC) technique, has different characteristics from SMLC due to a different leaf operation mechanism during the irradiation of photon and electron beams. By using the BInS, the actual delivered doses by SMLC and DMLC techniques are measured and compared. Even if the planned dose to a target volume is equal in our experimental setting, the actual delivered dose by DMLC technique is measured to be larger by 14.8% than that by SMLC, and this is due to scattered photons and contaminant electrons at d$_{max}$.

• The Korean Journal of Nuclear Medicine
• /
• v.32 no.4
• /
• pp.332-343
• /
• 1998

Purpose: The purpose of this study was to assess the diagnostic accuracy of various quantitation methods using F-18-fluorodeoxyglucose (FDG) in patients with malignant or benign lung lesion. Materials and Methods: 22 patients (13 malignant including 5 bronchoalverolar cell cancer; 9 benign lesions including 1 hamartoma and 8 active inflammation) were studied after overnight fasting. We performed dynamic PET imaging for 56 min after injection of 370 MBq (10 mCi) of FDG. Standardized uptake values normalized to patient's body weight and plasma glucose concentration (SUVglu) were calculated. The uptake rate constant of FDG and glucose metabolic rate were quantified using Patlak graphical analysis (Kpat and MRpat), three compartment-five parameter model (K5p, MR5p), and six parameter model taking into account heterogeneity of tumor tissue (K6p, MR6p). Areas under receiver operating characteristic curves (ROC) were calculated for each method. Results: There was no significant difference of rate constant or glucose metabolic rate measured by various quantitation methods between malignant and benign lesions. The area under ROC curve were 0.73 for SUVglu, 0.66 for Kpat, 0.77 for MRpat, 0.71 for K5p, 0.73 for MR5p, 0.70 for K6p, and 0.78 for MR6p. No significant difference of area under the ROC curve between these methods was observed except the area between Kpat vs. MRpat (p<0.05). Conclusion: Quantitative methods did not improve diagnostic accuracy in comparison with nonkinetic methods. However, the clinical utility of these methods needs to be evaluated further in patients with low pretest likelihood of active inflammation or bronchoalveolar cell carcinoma.