• Korean Journal of Medicinal Crop Science
• /
• v.13 no.3
• /
• pp.122-125
• /
• 2005

‘Johyun’ was a new adlay variety which was developed from three way crosses of (Suwon-6xOkayama)x UCN300-25 at the Northern Agricultural Research Station, Gyeonggi Province ARES. This variety had purple sheath and green leaf blade in primitive growth stage and green leaf and culm in heading stage. Colors of pistil and seed coat were milky-white and dark-brown, respectively. Plant height of Johyun was 179 cm and shortened 22 cm less than Yulmoo-1 which was tested by check variety. Johyun shortened 8 days of heading date and 15 days of ripening date compared with Yulmoo-1. Yield of Johyun was 320 kg/10a of hulled grains in three regional yield trials and 18% higher than Yulmoo-1. This variety was adaptable to single cropping in central and northern region of Korea.

• Resources Recycling
• /
• v.20 no.1
• /
• pp.28-36
• /
• 2011

More than 50% of refractory materials generated from high-temperature melting furnace was not carbonized and could be recycled by adopting proper separation process. In the present work, the separation of refractory materials has studied by adopting color sorting technology to promote the recycling of waste refractory. Purity of the refractory materials was obtained with at 97.2%, color temperature of sorter light source 6,500K, which gives less interference of surrounding light source. Purity and separation efficiency were improved as size is setting bigger and lower conveyer belt speed. It is revealed that optimum conditions were color temperature 6,500K, conveyer belt speed 1,000 mm/sec, particle size -20 mm, etc. To improve purity and separation efficiency on below 10mm size, the resolution of should be fixed camera and it narrow recognition range. As a result of the study, color sorting technology could be used for separation of waste refractory materials and will contribute to promote the waste recycling.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.3
• /
• pp.865-875
• /
• 2018

Selection of optimum reaction conditions during deoxygenation process of palm oil is essential factor to obtain the maximum yield of bio-jet fuel. In this context, the deoxygenation of palm oil was carried out in a fixed bed reactor with an internal diameter of 1 inch loaded with a 1 wt.% $Pt/Al_2O_3$ catalyst. The composition of the organic liquid product(OLP), which can be utilized as a transportation fuel through the upgrading process, was analyzed by a gas chromatography method. The palm oil/hydrogen ratio and hydrogen pressure in the feed affected the decarboxylation(DCB) and hydrodeoxygenation(HDO) reactions, resulting in a change in the composition of the OLP. As the reaction temperature increased, the continuous cracking reaction of the deoxygenation product was promoted and the product composition in the $C_5{\sim}C_{14}$ region was increased. Thus, the results can help to understand the characteristics of deoxidation reaction of palm oil as well as the subsequent process, hydro-upgrading, to obtain the maximum yield of bio-jet fuel.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.35 no.5
• /
• pp.316-323
• /
• 2009

Purpose: This study was performed to evaluate three-dimensional positional change of the condyle using 3D CT after bilateral sagittal split ramus osteotomy (BSSRO) in skeletal class III patients. Patients and methods: Nine patients who underwent BSSRO for mandibular set-back in skeletal class III malocclusion without facial asymmetry were examined. Miniplates were used for the fixation after BSSRO. 3-D CT was taken before, immediately after, and 6 months after undergoing BSSRO. After creating 3D-CT images using V-works $4.0^{TM}$ program, axial plane, coronal plane, & sagittal plane were configured. Three dimensional positional change, from each plane to the condyle, of the nine patients was measured before, immediately after, and 6 months after undergoing BSSRO. Results: 1. The mean value of mandibular set-back for nine mandibular prognathism patients was 7.36 mm (${\pm}\;2.42\;mm$). 2. In the axial view, condyle is rotated inward immediately after BSSRO (p < 0.05), comparing with preoperative but outward 6 months after BSSRO comparing with postoperative (p < 0.05). 3. In the axial view, condyle is moved laterally immediately after BSSRO (p < 0.05), comparing with preoperative but regressed 6 months after BSSRO comparing with preoperative (p > 0.05). 4. In the frontal & coronal view, there is changed immediately after and 6 months after BSSRO, comparing with preoperative but no statistical difference. Conclusion: These results indicate that three-dimensional positional change of the condyle in skeletal class III patients is observed lateral displacement & inward rotation immediate after BSSRO, but the condyle in 6 months after BSSRO tends to regress to preoperative position.

• Journal of Life Science
• /
• v.17 no.8 s.88
• /
• pp.1027-1033
• /
• 2007

Although paclitaxel induces apoptosis of cancer cells, its exact mechanism of action is not yet known. The present study has been performed to determine whether influence of paclitaxel in HeLa $S_{3}$ uterine cancer cells. Three assays were employed in this study: cell cytotoxicity, morphological assessments of apoptotic cells (DAPI staining assay), and western blot analysis. The results indicated that paclitaxel has cytotoxic effects in HeLa $S_{3}$ cells. Especially, the $IC_{50}$ value of paclitaxel was about 1 ${\mu}M$. And morphological changes (fragmentation) of cells were observed by paclitaxel in HeLa $S_{3}$ cells. The flow cytometric analysis of paclitaxel-treated cells indicated a block of G2/M phase. The results that pacli-taxel regulates the cell cycle, especially Sub-$G_{1}$ phase. Paclitaxel induces apoptosis of HeLa $S_{3}$ cells via PARP-dependent fashion, and this apoptosis is related to disappearance of Bcl-2 proteins.

• Journal of Adhesion and Interface
• /
• v.21 no.3
• /
• pp.101-106
• /
• 2020

In this study, epoxy-modified acrylate was synthesized. The synthesized acrylate was added to the composition for sheet molding compound (SMC) in the range of 5 phr to 15 phr. The prepared SMC prepreg was molded at high temperature and pressure to produce a glass fiber reinforced composite. Physical properties such as tensile and impact strength of the composite were measured, respectively. Experimental data show that the composite with 5 phr of synthesized acrylate has 20% improved tensile strength and 12% improved impact strength than that of the reference sample.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.37 no.3
• /
• pp.1-10
• /
• 2009

Wooded areas that are a part of school campuses are one type of urban forest. Most schools located in an urban environment make an excellent setting for a forest in terms of location and area. These kinds of wooded spaces also make the city greener and healthier. As a place where students spend a great deal of time, schools can also be a venue for environmental education. The creation of wooded areas in schools currently has focused on the end result only; by ignoring student needs and participation, these areas have not had a significant influence on student environmental education. Previous studies based on questionnaire survey are significant in that they have quantified subjective qualitative data via Likert Scale. There has been, however, a problem in quantifying the more ambiguous subjective data. Therefore, this paper has attempted to investigate those factors that have an influence on student satisfaction with the wooded areas of their school campus using Fuzzy Theory with elementary school students in Gyeongsangbuk-do. A change was observed in terms of the ranking of arithmetic mean values of 'school peculiarity' and 'emotion evolution' and center of gravity, which has adopted Fuzzy Theory, proving that Fuzzy Theory could rationally objectify qualitative data such as human thoughts. In terms of the influential factors on the satisfaction with school forests(regression coefficient), 'school uniqueness(0.159)' was the highest, followed by 'many trees(0.142),' 'importance of nature(0.136)' and 'emotion evolution(0.130).' This paper may therefore be useful as basic data for objective questionnaire surveys and the development of school forests.

• Journal of Korea Water Resources Association
• /
• v.51 no.6
• /
• pp.535-542
• /
• 2018

The study was intended to simulate the sediment reduction effects of the Vegetative Filter Strip (VFS) in uplands of Saemangeum watershed through VFSMOD-W model application. The model was calibrated by using the field data and the simulation scenarios were designed based on the investigation of uplands characteristics in Saemangeum watershed. The simulation scenarios were considered various size and slope of uplands including 1 ha, 5 ha, 10 ha of field size with width-length ratio of 1 : 1 having 7% and 15% of slopes under the daily rainfall of 50 mm, 100 mm, 150 mm, and 200 mm in order to mimic the different fields conditions. The effluent reduction ranged from 2.9~13.5% and 2.9~12.1% for runoff, and 33.8~97.0% and 27.1~85.9% for sediment under the field's slope of 7% and 15%, respectively. The VFS reduction effects showed different degree of influence from field size, slope, rainfall amounts. Based on the simulated results, the sediment contributing non-point source pollution expected to be reduced in the condition of VFS constructed 10% of fields in outlet of less than 10 ha of uplands having less than 15% of the slope.

• Journal of Korean Society for Geospatial Information Science
• /
• v.12 no.4 s.31
• /
• pp.53-60
• /
• 2004

Congestion index is needed for quantifying congestion level for various areas. So far, the index has been calculated based on multiple vehicle data for specified time interval. Such being the case, it was costly to build it and the usage of it was focused on policy development and evaluation rather than on traffic information provision. This study focuses on a development on a single vehicle based congestion index which can be a representative value for link congestion level and link speed information at the same time for dual purposes of traditional usages and information provision. A new term has been added for representing real time based arterial congestion level and it has been verified on a real time basis. The index was based on single vehicle GPS data and seemed to be cost effective in deriving the index. With the help of the index, the traffic information contents can be diversified in a constructive way in providing real time traffic information for ITS area and in using congestion level determination for traditional transportation areas.

• Journal of Food Hygiene and Safety
• /
• v.35 no.4
• /
• pp.354-364
• /
• 2020

For this paper we analyzed heavy metals including lead, cadmium, arsenic and mercury, and conducted risk assessment on 171 types of herbal medicines used as foods and drugs distributed in Seoul's Yangnyeongsi and Kyungdong (Gyeongdong) herbal medicine markets. The concentrations of the heavy metals were measured by the ICP-MS and a mercury analyzer. The detection ranges of the lead, cadmium, arsenic and mercury were found to be ND-4.719 mg/kg, ND-1.019 mg/kg, 0.002-8.696 mg/kg and ND-0.058 mg/kg, respectively. Artemisiae Capillaris Herba exceeded the standards of the MFDS (Ministry of Food and Drug Safety) for cadmium items, and Actinidiae Ramulus et Fulium et Fructus Vermicultus exceeded the standards for arsenic items. The non-carcinogenic risk assessment showed that there were no items exceeding 1 and that they were safe. The risk of carcinogenicity to lead was below 10^-6 in all items and was evaluated as safe. The risk of carcinogenicity of arsenic was almost all in the range of 10^-4 to 10^-6. All %PTWI are considered to be safe below 100.