• The Korean Journal of Air & Space Law and Policy
• /
• v.34 no.1
• /
• pp.159-201
• /
• 2019

Along with Annex 14 Volume I establishment in 1951 and the set-up of restriction surface around the runway, aeronautical technique and navigation performance achieved dazzling growth, and the safety and precision of navigation greatly improved. However, restrictions on surrounding obstacles are still valid for safe operation of an aircraft. Standards and criteria for securing safety of aircraft operating around and on airport is stated in Annex 11 Air Traffic Services and Annex 14 Aerodrome etc. In particular, Annex 14 Volume I presents the criteria for limiting obstacles around an airport, such as natural obstacles such as trees, mountains and hills to prevent collisions between aircraft and ground obstacles, and artificial obstacles such as buildings and structures. On the other hand, Annex 14 Volume I, in the application of the obstacles limitation surfaces, apply the exception criteria, as it may not be possible to remove obstacles that violate the criteria if the aeronautical study determines that they do not impair the safety and regularity of aircraft operation. Aeronautical study has been applied and implemented in various countries including United States, Canada and Europe etc. accordingly, Korea established and amended some provisions of the Enforcement rules of the Aviation Act and established the Aeronautical study guidelines to approve exceptions. However, because ICAO does not provide specific guidelines on procedures and methods of Aeronautical study, countries conducting aeronautical study have established and applied their own procedures and methods. Reflecting this realistic situation, at the 12th World Navigation Conference and at the 38th General Assembly, the contracting States demanded a reexamination of the criteria for current obstacle limitation surfaces and methods of aeronautical study, and the ICAO dedicated a team of experts to prepare new standard. This study, in line with the movement of international change in obstacle limitation surface and aeronautical study, aims to compare and analyze current domestic and external standards on obstacle limitation and height limits, while looking at methods, procedure and systems for aeronautical study. In addition, expecting that aeronautical study will be used realistically and universally in assessing the impact of obstacles, we would recommend the institutional improvement of the aeronautical study along with the development of quantitative analysis methods using the navigation data in the current aeronautical study.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.30 no.3
• /
• pp.28-37
• /
• 2022

Obstacle Limitation Surface (OLS) is conceptual surface establishing the airspace around aerodromes to be maintained from obstacles to ensure safe aircraft operations. Despite advances in the technologies for aircraft, navigation systems and the development of new flight procedures, the criteria defining OLS have not been amended since its initial establishment, resulting in the overestimation of areas for height restriction. As there were requests to examine OLS at the 12th Air Navigation Conference and the 38th ICAO Assembly, the research on the OLS revision began in earnest and ICAO has proposed Obstacle Free Surface (OFS) and Obstacle Evaluation Surface (OES) as an alternative of the existing OLS. OFS is surfaces where obstacles shall not be permitted, and OES is ones where obstacles be evaluated with an aeronautical study and could be permitted under some conditions. The purpose of this study is to preemptively assess the efficiency and safety of OFS and OES by applying them to the second runway (15L/33R) of Incheon International Airport. The results show that OFS and OES are capable of serving the instrument flight procedure safely with a smaller obstacle clearance area compared to the existing OLS.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.26.2-26.2
• /
• 2018

최근 연구결과에 따르면, 상용 AZ91D 마그네슘합금에 Ca과 Y을 복합 첨가함으로써 마그네슘합금의 문제점인 발화저항성을 크게 향상시키는 동시에 충분한 기계적 특성을 확보할 수 있어 마그네슘합금의 적용분야 확대에 대한 기대가 높아지고 있다. 한편 Ca과 Y을 복합 첨가된 마그네슘합금은 기존의 상용합금에 비해서 매우 우수한 내식성을 나타내는 것으로 알려져 마그네슘합금의 또 하나의 장애물로 여겨졌던 부식 문제 또한 해결할 수 있을 것으로 기대되고 있다. 선행연구결과, 이러한 내식성의 향상은 Ca과 Y의 첨가에 따라 이차상의 조성이 변하게 되면서 상과 기지간의 부식 전위의 차이가 감소하고, 이로 인해 미세 갈바닉 부식 발생이 감소하게 되었기 때문으로 판단된다. 본 연구에서는 이러한 Ca 과 Y의 첨가가 이차상의 부식 전위 뿐 만 아니라 AZ91D 합금의 표면 특성을 어떻게 변화시키고 이러한 특성의 변화가 내식성에 어떠한 영향을 미치는 지에 대하여 평가하였다. 다양한 전기화학적 분석을 통해 각 합금의 표면 특성과 내식성을 평가하였고, 표면 산화층 분석 및 TEM 분석 등을 통해 표면 피막의 구조와 조성을 분석하여 차이를 비교하였다.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.6
• /
• pp.55-59
• /
• 2008

For effective mobility control of UGV(unmanned ground vehicle), the terrain cover classification is an important component as well as terrain geometry recognition and obstacle detection. The vision based terrain cover classification algorithm consists of pre-processing, feature extraction, classification and post-processing. In this paper, we present a method to classify terrain covers based on the color and texture information. The color space conversion is performed for the pre-processing, the wavelet transform is applied for feature extraction, and the SVM(support vector machine) is applied for the classifier. Experimental results show that the proposed algorithm has a promising classification performance.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.24 no.2
• /
• pp.25-30
• /
• 2016

Obstacle defines all fixed and mobile objects, or parts thereof, that are located on an area intended for the surface movement of aircraft or extend above a defined surface intended to protect aircraft in flight or stand outside those defined surfaces and that have been assessed as being a hazard to air navigation. The airspace around airports are maintained free from obstacles so as to permit the intended aeroplane operations at the airports to be conducted safely and to prevent the airports from becoming unusable by the growth of obstacles around the airports. This is achieved by establishing a series of obstacle limitation surfaces or airspace imaginary surfaces that define the limits to which objects may project into the airspace. This is a case study that shows an application of obstacle limitation criteria, which must be maintained free from an critical obstacle, for specific conditions of two airports. For the purpose of the application, aeronautical studies/flight safety influence assessments were used to identify possible solutions and select a solution that is acceptable without degrading aviation safety.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.46-46
• /
• 2008

스텔스 기능을 가진 군사용 항공기는 레이다 망의 추적을 피하기 위해 일반 냉각수 대신에 절연유를 냉각매체로 사용한다. 그러나 절연유는 물에 비하여 열전달특성이 매우 낮기 때문에 항공기 전기전자 기기/부품 발열부를 효과적으로 냉각시키지 못하는 한계성을 가지고 있다. 따라서 본 연구에서는 나노유체(Nanofluid) 개념을 이용하여 절연유에 알루미나 및 질화알루미늄 나노분말을 미랑 분산시킨 나노절연유를 제조하고 이것의 열전달특성을 순수 절연유의 그것과 비교 평가함으로써, 냉각특성이 크게 개선된 새로운 냉매로서의 적용 가능성을 확인하고자 하였다. 다만 나노절연유를 제조함에 있어서 가장 큰 장애물은 오일에 대한 분산성 확보에 있기 때문에, 비드밀 및 초음파를 이용한 나노분말 응집체의 습식분산 및 분산제를 이용한 친유성 표면개질을 동시에 수행함으로써 장시간 안정된 분산성을 확보하도록 노력하였다. 나노유체의 열전도도 및 대류열전달계수는 비정상열선법을 이용하여 측정하였으며, 유체 속의 분말 분산 상태는 원심력을 이용한 분산안정성 평가장치 및 cryo FE-SEM을 이용하여 확인하였다. 또한 분말 형상이 대류열전달에 미치는 영향을 조사하기 위하여 알루미나 나노분말은 구상과 침상의 분말을 모두 사용하였고, 질화알루미늄 외에 다이아몬드 나노절연유도 함께 제조, 평가함으로써 냉각 및 절연특성, 그리고 물리화학적 안정성이 우수하고 실적용 가능성이 가장 높은 재료를 도출하고자 하였다.

• Journal of the Korean Solar Energy Society
• /
• v.23 no.1
• /
• pp.39-47
• /
• 2003

In order to test the predictability of the wind resource assessment computer code in our country a field experiment and prediction by WAsP has been compared. A field experiment has been performed in Songdang province, Jeju island, composed of sea, inland flat terrain, a high and a low slope craters. For this experiment, four meteorological towers have been installed at seashores, inland flat and on a crater. Wind resource at one site is predicted by WAsF with the meteorological data at the other three sites. The comparisons show that the WAsP preditions give better agreement with experimental data by adjusting the roughness descriptions.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.1C
• /
• pp.45-51
• /
• 2010

In urban area, design and construction of civil engineering structures such as subway tunnel, underground space and deep excavation is impeded by unreliable site investigation. Variety of embedded objects, electric noises and traffic vibrations degrades the quality of site investigation, whatever the site-investigation technique would be. In this research, a preliminary research was performed to develop a dedicated site investigation technique for urban geotechnical sites, which can overcome the limitations of urban sites. HiRAS (Hybrid Integration of Surface Waves and Resistivity) technique which is the first outcome of the preliminary research was proposed in this paper. The technique combines surface wave as well as electrical resistivity. CapSASW method for surface-wave technique and PDC-R technique for electrical resistivity survey were incorporated to develop HiRAS technique. CapSASW method is a good method for evaluating material stiffness and PDC-R technique is a reliable method for determination of underground stratification even in a site with electrical noise. For the inversion analysis of HiRAS techniuqe, a site-specific relationship between stress-wave velocity and resistivity was employed. As for outgrowth of this research, the 2-D distribution of Poisson's ratio could be also determined.

• Korean Journal of Microbiology
• /
• v.49 no.2
• /
• pp.211-214
• /
• 2013

Bisphenol A (BPA) is a highly hazardous component to human since it is regarded as one of endocrine disruptors. For the analysis and/or removal of BPA, the searching for the specific ligand with a selective affinity to target BPA is required. In order to find the peptide moiety that specifically binds to BPA, the ultrasound-assisted biopanning was carried out with a phage-displayed peptide library expressing constrained heptamer. After six rounds of positive screening against BPA particles followed by the negative screening against the surface of eppendorf tube, the peptide sequence (CysLysSerLeuGluAsnSerTyrCys) with affinity to BPA was screened based on the order of frequency from the screened phage clones. To further verify the specificity of screened peptide sequence, the cross-binding affinity of the phage peptide toward BPA analogues such as Bisphenol S (BPS) and Bisphenol F (BPF) was also assessed, where the selected phage peptide showed a higher affinity to BPA over BPS and BPF.

• Journal of the Korean Ceramic Society
• /
• v.40 no.9
• /
• pp.902-908
• /
• 2003

Au/TiO$_2$ core-shell structure nanoparticles were synthesised by sol-gel process, and the morphology and crystallinity of TiO$_2$ shell were investigated by TEM and UV-Vis. absorption spectrometer. Au/TiO$_2$ core-shell structure nanoparticles could be prepared by the hydrolysis of TOAA (Titanium Oxide Acethylacetonate) in Au colloid ethanol solution with $H_2O$. The thickness of TiO$_2$ shell on the surface of Au particles was about 1 nm. To investigate the crystallinity of TiO$_2$ shell, UV light with 254 nm and radioactive lay of $^{60}$ CO were irradiated on the TiO$_2$ coated Au colloid ethanol solution. The surface plasmon phenomenon of Au nanoparticles appeared only when the radioactive lay was irradiated on the TiO$_2$ coated Au colloid ethanol solution. From these results, it was found that the TiO$_2$ shell was amorphous and the MUA (Mercaptoundecanoic Acid) layer on the Au particle for its dispersion didn't act as an obstacle to disturb the movement of electron onto the surface of Au particle.