• Journal of the Korean Society of Radiology
• /
• v.11 no.7
• /
• pp.619-625
• /
• 2017

The sudy was intended to evaluate the optimal equipment selection by quantitatively assessing the SNR(signal to noise ratio) and CNR(contrast to noise ratio) on the abdominal organ. This study performed on 1.5 T and 3.0 T MRI units focusing on HASTE, HASTE(f/s) and FFE(in of phase), FFE(out of phase) without using the contrast medium(Gadolinium). The data analysis was performed by randomly selecting on 1.5 T and 3.0 T abdominal MRI images. As a results, SNR and CNR values of 3.0 T is higher than 1.5 T at liver, kidney and spleen(p<0.05). Stomach, abdominal fat and pancreas was obtained a higher value at 1.5 T(p<0.05). On conclusion, the organs of outer part in the body showed generally a high value at 3.0 T, and the organs of inner part in the body including the gas showed a high value at 3.0 T because of a large difference on magnetic susceptibility.

• The Journal of the Korea Contents Association
• /
• v.13 no.2
• /
• pp.390-399
• /
• 2013

The purpose of this study is to examine the impact of enterprise R&D investment on inter-industry technology spillover in Korea under the new Normal Era. In order to do this, we tested the effect of production inducement, backward and forward linkage effects, and the effect of technology spillover such as technology intensity effects and technology diffusion effects based on an input-output framework. The results show that the high index industries of the production inducement effect were professional, scientific and technical activities, manufacture of metal products, and general machinery. Some manufacturers of other non-metallic mineral products and transport equipment sectors appeared to have the strong effect of forward and backward linkages that were almost equivalent to high-tech manufacturing industries. In particular, the industries of professional, scientific and technical activities appeared to have the strong effect of both forward and backward linkages. Therefore, we need to drive a strong policy support to higher enterprise R&D investment in the those particular industries not only to increase global competitiveness, but also to widen up the technology spillover effect on other industries.

• Membrane Journal
• /
• v.27 no.5
• /
• pp.375-388
• /
• 2017

Wastewater treatment (WWT) technology has been developing from simple pollutant treatment to energy and resource-saving advanced technology, and various technologies combined with IT and BT are developed to minimize the amount of pollutant and toxic substance discharge to the public water areas and to improve operational efficiency. To examine the development trend of domestic wastewater treatment technology, the registered patent technologies were surveyed, classified and analyzed by year and sector. This paper considers the status of patent registration related to WWT from 2010.1 to 2017.5 in terms of the number of specific technical areas, and the trends are analyzed based on the 10 categorization field such as biological and physicochemical treatment process, equipment and device, material, sludge treatment, membrane, process control and 42 specific technical areas. A total of 3,356 patents have been registered since 2010, and the number of patents has been decreasing since the peak at 2013 and maintains 3~400 per year. The total number of patents has not yet been less than other countries, but the number of patents of more advanced technologies, which can lead the global market, such as process monitoring, new concept processing and equipment technologies is still insufficient compared to developed countries.

• Journal of Internet of Things and Convergence
• /
• v.6 no.3
• /
• pp.75-80
• /
• 2020

Recently, the size of the IoT sensor has been decreased and the collecting direction of the IoT sensor for acquiring the data have been changed from 2D to 3D. It makes sensor structure complex. In the fabrication of the complex structure, 3D printing technology has more useful than traditional manufacturing technologies. Among 3D printing technologies, FDM (fused deposition modeling) is a candidate technology to fabricate a small IoT sensor because the price of the machine and the material is cheap. In the FDM process, a 3D shape is made by depositing the melted filament. Recently, the patent of FDM technology is expired and cheat machines are developed based on the open-source. In the FDM process, mechanical properties of a fabricated part is affected by a lots of factors such as the kind of material and process parameters. Among them, infill is affecting the mechanical properties and the production lead time as well. In this work, a new method to optimize the FDM process with the consideration of mechanical property and production lead time was proposed. To verify the method, the fabrications were performed with the different infill rates. The results of tensile tests were analyzed to verify the proposed method.

• Economic and Environmental Geology
• /
• v.46 no.6
• /
• pp.495-508
• /
• 2013

Recently, stable isotopes (${\delta}^{18}O$ and ${\delta}D$) of water are increasingly analyzed using laser-based technologies. These methods have advantages over Isotope Ratio Mass Spectrometry (IRMS) in that they can be used for in-situ measurements and require much less maintenance and preparation work. Two types of laser-based methods are currently available, which have different analytical principles; OA-ICOS (off-axis integrated cavity output spectroscopy) and WS-CRDS (wavelength-scanned cavity ring-down spectroscopy). In the WS-CRDS instrument, water is vaporized at controlled environment and transferred to an optical cavity by nitrogen carrier gas, and stable isotopic compositions of water vapor are measured using the degree of absorbance of specific wavelengths and the ratios of attenuation time of the laser intensity with the sensitivity of ppb to tens of ppt level. In this study, we introduce the principle of the WS-CRDS technology and the performance results including stability and comparisons with Isotope Ratio Mass Spectrometry (IRMS) and suggest possible applications of various topics in isotope hydrology.

• Journal of Information Technology and Architecture
• /
• v.10 no.1
• /
• pp.101-111
• /
• 2013

Internet traffic volume has been increasing rapidly due to popularization of various smart devices and Internet development. In particular, HTTP-based traffic volume of smart devices is increasing rapidly in addition to desktop traffic volume. The increased mobile traffic can cause serious problems such as network overload, web security, and QoS. In order to solve these problems of the Internet overload and security, it is necessary to accurately detect applications. Traditionally, well-known port based method is utilized in traffic classification. However, this method shows low accuracy since P2P applications exploit a TCP/80 port, which is used for the HTTP protocol; to avoid firewall or IDS. Signature-based method is proposed to solve the lower accuracy problem. This method shows higher analysis rate but it has overhead of signature generation. Also, previous signature-based study only analyzes applications in HTTP protocol-level not application-level. That is, it is difficult to identify application name. Therefore, previous study only performs protocol-level analysis. In this paper, we propose a signature generation method to classify HTTP-based traffics in application-level using the characteristics of typical semi HTTP header. By applying our proposed method to campus network traffic, we validate feasibility of our method.

• Journal of the Korea Convergence Society
• /
• v.8 no.9
• /
• pp.1-7
• /
• 2017

As the network environment develops and speeds up, a lot of smart devices is developed, and a high-speed smart society can be realized while allowing people to interact with objects. As the number of things Internet has surged, a wide range of new security risks and problems have emerged for devices, platforms and operating systems, communications, and connected systems. Due to the physical characteristics of IoT devices, they are smaller in size than conventional systems, and operate with low power, low cost, and relatively low specifications. Therefore, it is difficult to apply the existing security solution used in the existing system. In addition, IoT devices are connected to the network at all times, it is important to ensure that personal privacy exposure, such as eavesdropping, data tampering, privacy breach, information leakage, unauthorized access, Significant security issues can arise, including confidentiality and threats to facilities. In this paper, we investigate cases of security threats and cases of network of IoT, analyze vulnerabilities, and suggest ways to minimize property damage by Internet of things.

• 재활복지
• /
• v.21 no.2
• /
• pp.191-216
• /
• 2017

Recently, according to demands for a mobility right of people with disabilities, the use of powered mobility device has been rapidly increased and recharging facilities have been set up in many places of country. But the standards for the installation and management of the facilities are not clear and many problems are brought up in operating the facilities. Therefore, regulations and realities of recharging facilities were investigated and the user survey was progressed. On the basis of the research results, a rational and efficient installation and management plan was drawn up. The plan suggests that the recharging facilities should be installed in a building managed by government and many kinds of public building like library, theater, sports facilities, department store, museum, etc. Further, the recharging facilities should secure independent place which have specified area for protecting of privacy and provide some amenities for people with disabilities to enhance the conveniences.

• Journal of the Korea Institute of Building Construction
• /
• v.21 no.6
• /
• pp.677-687
• /
• 2021

If a fire breaks out in a building, occupants can evacuate more rapidly if they are able to identify the location of the fire, the exits, and themselves. This study derives the requirements of system development, such as distance non-limitation, a non-additional device, a non-centralized server system, and low power for an emergency, to identify information about the fire and the location of evacuees. The objective is to receive and transmit information and reduce the time and effort of the database for location tracking. Accordingly, this study develops a server-independent system that collects information related to a building fire and an evacuee's location and provides information to the evacuee on their mobile device. The system is composed of a transmitting unit to disseminate fire location information and a mobile device application to determine the locations of the fire and the evacuee. The developed system can contribute to reducing the damage to humans because evacuees can identify the location of the fire, exits, and themselves regardless of the impaired server system by fire, the interruption of power source, and the evacuee's location. Furthermore, this study proposes a theoretical basis for reducing the effort required for database construction of the k-nearest neighbor fingerprint.

• Journal of the Korean Chemical Society
• /
• v.66 no.2
• /
• pp.96-106
• /
• 2022

The purpose of this study is to investigate the effect of science-centered convergence class program using realistic contents such as virtual reality and augmented reality on class satisfaction, scientific attitudes and the perception of the gifted students in middle school. After developing the convergence class program including realistic contents using smart devices, we applied it to the gifted students. We analyzed the class satisfaction, scientific attitude and perception of the gifted students through questionnaires. In addition, a survey was conducted on the pre-teachers to investigate and analyze the class satisfaction, scientific attitude of the science class program to students and the perception of science classes using realistic contents. As a result, both students and pre-teachers were positively aware of class satisfaction by science class program using realistic contents. In particular, it was positive in that the class can induce learning motivation and interest. On the other hand, it was pointed out that the low-quality App and lack of infra for smart devices were disadvantages. In addition, pre-teachers lack confidence and information about class using the realistic contents, but they recognize the need of classes using realistic contents for students and education for pre-teachers. Based on this, it obtained suggestions on the preparation of facilities and equipment in schools for future education, development of contents that can be used for convergence class, development of programs and teaching·learning materials using realistic contents, and education for pre-teachers.