• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.8
• /
• pp.29-37
• /
• 2019

Textile quality management targets the physical properties of fabrics and the subjective discriminations of color and fitting. Color is the most representative quality factor that consumers can use to evaluate quality levels without any instruments. For this reason, quantification using a color discrimination device has been used for statistical quality management in the textile industry. However, small and medium-sized domestic textile manufacturers use only visual inspection for color discrimination. As a result, color discrimination is different based on the inspectors' individual tendencies and work procedures. In this research, we want to develop a textile industry-friendly quality management method, evaluating the possibility of rapid color discrimination using a digital imaging device, which is one of the office-automation instruments. The results show that an imaging process-based color discrimination method is highly correlated with conventional color discrimination instruments ($R^2=0.969$), and is also applicable to field discrimination of the manufacturing process, or for different lots. Moreover, it is possible to recognize quality management factors by analyzing color components, ${\Delta}L$, ${\Delta}a$, ${\Delta}b$. We hope that our rapid discrimination method will be a substitute technique for conventional color discrimination instruments via elaboration and optimization.

• Journal of the Korean Society of Radiology
• /
• v.12 no.6
• /
• pp.737-743
• /
• 2018

Patient exposure dose exposure test, which is one of the items of accuracy control of Computed Tomography, conducts measurements every year based on the installation and operation of special medical equipment under Article 38 of the Medical Law, And keep records. The CT-Dose phantom used for dosimetry can accurately measure doses, but has the disadvantage of high price. Therefore, through this research, the existing CT - Dose phantom was similarly manufactured with a 3D printer and compared with the existing phantom to examine the usefulness. In order to produce the same phantom as the conventional CT-Dose phantom, a 3D printer of the FFF method is used by using a PLA filament, and in order to calculate the CTDIw value, Ion chambers were inserted into the central part and the central part, and measurements were made ten times each. Measurement results The CT-Dose phantom was measured at $30.44{\pm}0.31mGy$ in the periphery, $29.55{\pm}0.34mGy$ CTDIw value was measured at $30.14{\pm}0.30mGy$ in the center, and the phantom fabricated using the 3D printer was measured at the periphery $30.59{\pm}0.18mGy$, the central part was $29.01{\pm}0.04mGy$, and the CTDIw value was measured at $30.06{\pm}0.13mGy$. Analysis using the Mann - Whiteney U-test of the SPSS statistical program showed that there was a statistically significant difference in the result values in the central part, but statistically significant differences were observed between the peripheral part and CTDIw results I did not show. In conclusion, even in the CT-Dose phantom made with a 3D printer, we showed dose measurement performance like existing CT-Dose phantom and confirmed the possibility of low-cost phantom production using 3D printer through this research did it.

• Journal of the Korean Society of Radiology
• /
• v.13 no.2
• /
• pp.271-281
• /
• 2019

This study investigated the shielding efficiency of various types of shielding materials and measured the dose by organ using the phantom. Results of Shielding Efficiency Measurement Using Personal Radiation Meter. Among the various shielding materials, 1.1 mm RNS-TX composed of nano tungsten showed the highest shielding efficiency and 0.2 mm lead shielding showed the lowest shielding efficiency. 99mTc 30 mCi was exposed to the phantom for 120 minutes and the result of the measurement of the organs. 20.53 mSv without radiation protective clothing, 8.75 mSv when wearing 0.25 mm Pb protective clothing, 6.03 mSv when wearing 0.5 mm Pb protective clothing. 131I 2 mCi mCi was exposed to the phantom for 120 minutes and the result of the measurement of the organs. 7.71 mSv without radiation protective clothing, 4.88 mSv when wearing 0.25 mm Pb protective clothing, 2.79 mSv when wearing 0.5 mm Pb protective clothing. 18F 5 mCi was exposed to the phantom for 120 minutes and the result of the measurement of the organs. 16.39 mSv without radiation protective clothing, 15.84 mSv when wearing 0.25 mm Pb protective clothing, 12.52 mSv when wearing 0.5 mm Pb protective clothing. None of the radiation workers working in the nuclear medicine department exceeded the dose limit. However, when compared with other workers in the hospital, they showed a relatively high dose. Therefore, it is necessary to prepare measures to reduce and manage the dose of radiation workers in the nuclear medicine department through the wearing of radiation protective clothing made of lightweight, shielding material with good shielding efficiency, circulation task, task sharing, and substitution equipment such as auto dispenser.

• Science of Emotion and Sensibility
• /
• v.21 no.4
• /
• pp.63-76
• /
• 2018

The purpose of this study was to investigate the effect of contact type textile electrode structure on heart activity signal acquisition for smart healthcare. In this study, we devised six contact type textile electrodes whose electrode size and configuration were manipulated for measuring heart activity signals using computerized embroidery. We detected heart activity signals using a modified lead II and by attaching each textile electrode to the chest band in four healthy male subjects in a standing static posture. We measured the signals four times repeatedly for all types of electrodes. The heart activity signals were sampled at 1 kHz using a BIOPAC ECG100, and the detected original signals were filtered through a band-pass filter. To compare the performance of heart activity signal acquisition among the different structures of the textile electrodes, we conducted a qualitative analysis using signal waveform and size as parameters. In addition, we performed a quantitative analysis by calculating signal power ratio (SPR) of the heart activity signals obtained through each electrode. We analyzed differences in the performance of heart activity signal acquisition of the six electrodes by performing difference and post-hoc tests using nonparametric statistic methods on the calculated SPR. The results showed a significant difference both in terms of qualitative and quantitative aspects of heart activity signals among the tested contact type textile electrodes. Regarding the configurations of the contact type textile electrodes, the three-dimensionally inflated electrode (3DIE) was found to obtain better quality signals than the flat electrode. However, regarding the electrode size, no significant difference was found in performance of heart signal acquisition for the three electrode sizes. These results suggest that the configuration method (flat/3DIE), which is one of the two requirements of a contact type textile electrode structure for heart activity signal acquisition, has a critical effect on the performance of heart activity signal acquisition for wearable healthcare. Based on the results of this study, we plan to develop a smart clothing technology that can monitor high-quality heart activity without time and space constraints by implementing a clothing platform integrated with the textile electrode and developing a performance improvement plan.

• Journal of the Society of Disaster Information
• /
• v.17 no.3
• /
• pp.640-654
• /
• 2021

Purpose: Normal education operation was difficult in the national disaster situation of Coronavirus Infection-19. Non-face-to-face education can be an alternative to face to face education, but it is not easy to provide the same level of education. In this study, the professor of disaster management field will identify problems that can occur in the overall operation and progress of non-face-to-face education and seek ways to improve non-face-to-face education. Method: Non-face-to-face real-time education was largely categorized into pre-class, in-class, post-class, and evaluation, and case studies were conducted through the professor's case studies. Result&Conclusion: The results of the survey are as follows: First, pre-class, it was worth considering providing a non-face-to-face educational place for professors, and the need for prior education on non-face-to-face educational equipment and systems was required. In addition, it seems necessary to make sure that education is operated smoothly by giving enough notice on classes and to make efforts to develop non-face-to-face education programs for practical class. Second, communication between professor and learner, and among learners can be an important factor in non-face-to-face mid classes. To this end, it is necessary to actively utilize debate-type classes to lead learners to participate in education and enhance the educational effect through constant interaction. Third, non-face-to-face post classes, policies on the protection of privacy due to video records should be prepared to protect the privacy of professors in advance, and copyright infringement on educational materials should also be considered. In addition, it is necessary to devise various methods for fair and objective evaluation. According to the results of the interview, in the contents, which are components of non-face-to-face education, non-face-to-face education requires detailed plans on the number of students, contents, and curriculum suitable for non-face-to-face education from the design of the education. In the system, it is necessary to give the professor enough time to fully learn and familiarize with the function of the program through pre-education on the program before the professor gives non-face-to-face classes, and to operate the helpdesk, which can thoroughly check the pre-examination before non-face-to-face education and quickly resolve the problem in case of a problem.

• The Journal of Korean Society for Radiation Therapy
• /
• v.33
• /
• pp.15-24
• /
• 2021

This study is about the introduction and usefulness evaluation of the manufacturing method of the bolus-helmet. Helmet-production for the treatment of scalp tumor patients has been tried and will continue in many creative and various ways. However, Most of the research data did not significantly reduce the psychological burden and physical and physical discomfort that the patient had to bear due to the time and economic cost required for the production of the helmet, the convenience of production, and the complexity of the process. In addition, recently, studies using more advanced technologies and equipment such as 3D-printer technology, which are being studied as a way to increase the treatment effect, are being introduced, but the time, economic cost, and psychological and physical burden are still the sole responsibility of the patient. Isn't it getting worse? The reality is that the thoughts of concern cannot be erased. Therefore, by maintaining the physical properties of the bolus and manufacturing a helmet without incurring additional costs, the physical and physical discomfort aggravated to the patient was reduced and the procedure and time for helmet manufacturing were minimized. In this way, it was possible to reduce the time, economic cost, and physical discomfort required for the production of the helmet, and it was also possible to minimize the psychological burden of the patient, although it is invisible. Additionally, in evaluating the usefulness of helmets, we are able to continuously seek and develop ways to reduce the air-gap interval, and as a result, we will be able to introduce a method to keep it within 2.0mm along with the manufacturing method through this study. I feel very welcome. Finally, I hope that anyone working in the Department of Radiation Oncology will be able to easily manufacture the helmet required for radiation therapy using a bolus through the guide-line on helmet manufacturing provided by this institute. I hope and hope that if you have any questions or inquiries that arise during the production process, please feel free to contact us through the researcher's e-mail or mobile phone at any time.

• Journal of Korea Entertainment Industry Association
• /
• v.15 no.4
• /
• pp.337-347
• /
• 2021

This study is a qualitative study conducted to provide basic data for therapists working in long-term care hospitals to improve their countermeasure strategies for new infectious diseases and improvement of the treatment room infection management system, and to help therapists understand their infection management work. Colaizzi's phenomenological research method was applied as the research method. Telephone interviews were conducted with nine occupational therapists and physical therapists working in nursing hospitals. The contents of the interview were recorded with the consent of the study subjects, and additional confirmation was received by email. The recorded content was analyzed after transcription, and the meaning and nature of the experience coping with COVID-19 were described. The content was organized into 6 themes, 17 main meaning and 49 meaning units. In accordance with the COVID-19 situation, the infection control system has been strengthened by reinforcing infection control education in nursing hospitals, practicing infection control, and supervising infection control outside business hours. It was found that the treatment environment was changed due to the restriction of treatment activities by practicing distancing in the treatment room, adjusting rest and meal times during working hours, and strengthening infection control. In addition, the therapist's role has been expanded and the paradigm of treatment has changed, such as considering the untact intervention, and they have experienced cohort quarantine, pre-tested for COVID-19, vaccinations, and side effects from COVID-19. However, due to the infection work, the therapist's work burden is increased, and the person is experiencing fear, depression, and work stress from the spread of COVID-19. They were also aware of the need for nursing hospital care personnel support, such as guaranteeing rest after vaccination and providing infection control tools and equipment. The results of this study are expected to be used as basic data for human and physical support for the development of infectious disease response strategy programs in nursing hospital treatment rooms and for infection control in nursing hospitals.

• Journal of Korea Water Resources Association
• /
• v.55 no.8
• /
• pp.623-634
• /
• 2022

Due to river maintenance projects such as the creation of hydrophilic areas around rivers and the Four Rivers Project, the flow characteristics of rivers are continuously changing, and the risk of water quality accidents due to the inflow of various pollutants is increasing. In the event of a water quality accident, it is necessary to minimize the effect on the downstream side by predicting the concentration and arrival time of pollutants in consideration of the flow characteristics of the river. In order to track the behavior of these pollutants, it is necessary to calculate the diffusion coefficient and dispersion coefficient for each section of the river. Among them, the dispersion coefficient is used to analyze the diffusion range of soluble pollutants. Existing experimental research cases for tracking the behavior of pollutants require a lot of manpower and cost, and it is difficult to obtain spatially high-resolution data due to limited equipment operation. Recently, research on tracking contaminants using RGB drones has been conducted, but RGB images also have a limitation in that spectral information is limitedly collected. In this study, to supplement the limitations of existing studies, a hyperspectral sensor was mounted on a remote sensing platform using a drone to collect temporally and spatially higher-resolution data than conventional contact measurement. Using the collected spatio-temporal hyperspectral images, the tracer concentration was calculated and the transverse dispersion coefficient was derived. It is expected that by overcoming the limitations of the drone platform through future research and upgrading the dispersion coefficient calculation technology, it will be possible to detect various pollutants leaking into the water system, and to detect changes in various water quality items and river factors.

• Atmosphere
• /
• v.33 no.2
• /
• pp.223-246
• /
• 2023

This paper summarized the research papers on weather extremes that occurred in the Republic of Korea, which were published in the domestic and foreign journals during 1963~2022. Weather extreme is defined as a weather phenomenon that causes serious casualty and property loss; here, it includes typhoon, heavy rain, drought, heat wave, cold surge, heavy snow, and strong gust. Based on the 2011~2020 statistics in Korea, above 80% of property loss due to all natural disasters were caused by typhoons and heavy rainfalls. However, the impact of the other weather extremes can be underestimated rather than we have actually experienced; the property loss caused by the other extremes is hard to be quantitatively counted. Particularly, as global warming becomes serious, the influence of drought and heat wave has been increasing. The damages caused by cold surges, heavy snow, and strong gust occurred over relatively local areas on short-term time scales compared to other weather hazards. In particularly, strong gust accompanied with drought may result in severe forest fires over mountainous regions. We hope that the present review paper may remind us of the importance of weather extremes that directly affect our lives.

• The Korean Journal of Franchise Management
• /
• v.4 no.1
• /
• pp.1-24
• /
• 2013

The purpose of this work is to analyze the case that Yeongju Municipality Government of Gyeongbuk and Jung Donuts Co., Ltd., a franchise company, activated local economy through Farm's Franchise Commercialization (FCC) and to establish the concept of FCC. As a food service franchise company, Jung Donuts specializes in making and selling glutinous rice donuts. In cooperation with Commodity Dept. of Yeongju Municipality Government, the company cultivates raw materials under contract. Such farm's franchise business has the following advantages: First, it is meaningful in the point that it contributes to opening a new market of local agricultural products in a stable way. In short, by using most agricultural products of Yeongju as raw materials, the business serves as a stable market for farmers. Secondly, it is possible to set a reasonable price through stable supply of raw materials. It is to advantages of both producers and consumers. Thirdly, the business brings about the effect of employment rise. It can cause increases in employment of franchise head office and its agencies, and of the Commodity Dept.. Lastly, it produces the promotion effect of local special products. By expanding its agencies across the country, a franchise business can promote the items of raw materials in terms of marketing. The successful FCC needs to meet three requirements as follows. The first one is to establish systematic logistic system. Stable logistic system is required in order to directly distribute and deliver products to nationwide agencies by a producing place. The second one is constant R&D activity. Through the activity of R&D of raw materials and equipment, they should be used most effectively. The third one is to build mutual trust relationship. For long-term business achievements, it is required to establish mutual trust relationship in which relevant entities share their visions with each other and cooperate with each other.