• Proceedings of the Optical Society of Korea Conference
• /
• 1988.06a
• /
• pp.132-134
• /
• 1988

얇은 금속면의 얀쪽 표면에 유전율이 같은 물질을 두는 감쇄 전반사 방법에 의하면 수명이 긴 표면 플라즈몬이 생성될수 있다. 이럼엄을 이용하여 금속표면과 접한 액체에서의 라만 산란의 증가를 얻을수 있다.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.119-127
• /
• 2011

This paper shows development of 1-3 dimensional hybrid mesh method to analysis flow induced by ultra-high speed vehicle inside a long distance tunnel. For three-dimensional analysis of the tunnel system many meshes are required. However it is not efficient to calculate the whole tunnel system in three-dimension. Therefore in this paper, three-dimension meshes was used to describe stations, shafts and around vehicle, and one-dimension meshes was used to describe the tunnel except these three sections. And unsteady flow analysis of the ultra-high speed vehicle was performed with UDFs in commercial software, Ansys vr. 12.0.

• Journal of the Korea Convergence Society
• /
• v.9 no.8
• /
• pp.33-39
• /
• 2018

In the Internet of Things (IoT) era, objects are connected to each other by wired and wireless networks, and information is exchanged whenever necessary. Channel and network environments change over time; thus, a carrier sensing function that identifies whether signals containing information are present in the channel is essential. The carrier sensing circuit of a wireless communication system determines the receiver sensitivity, and the receiver sensitivity is closely related to the service coverage and service quality of the system. As the receiver sensitivity decreases, the service coverage increases but it becomes sensitive to noise. However, as the receiver sensitivity increases, the service coverage decreases but it becomes insensitive to the noise. Therefore, carrier sensing design and optimization are very important from the viewpoint of the receiver sensitivity and noise sensitivity. This paper proposes an effective carrier sensing technique from the viewpoint of the receiver sensitivity for the long range IoT.

• Journal of Internet of Things and Convergence
• /
• v.3 no.1
• /
• pp.13-19
• /
• 2017

In this paper, we designed and implemented Thing Connected-Green, a self-installing agricultural automation system capable of remote monitoring and control based on Low Power Wide Area communication technology (LPWA). Farming requires water, sunlight, soil, fertilizer, temperature control, etc., and these elements can be remotely monitored and controlled using an automated system. Using this system, it is possible to construct an agricultural automation system which can be optimized according to the kind of plant and cultivation environment from vinyl house to flower garden. The information gathered from the sensor is stored in the server through the gateway, and the optimal cultivation environment can be set and operated using the smart phone based on the big data.

• Korean Journal of Remote Sensing
• /
• v.29 no.2
• /
• pp.243-251
• /
• 2013

The optical properties of long-range transported Asian dust were studied by the satellite observations and Sun/sky radiometer measurements from the Aerosol Robotic Network(AERONET) in Northeast Asia. The movement of Asian dust from source regions to downwind areas was tracked by the Ozone Monitoring Instrument(OMI) derived aerosol product imagery. The optical properties of Asian dust were classified for geographical locations, which are source regions such as deserts area in Dunhuang and Inner Mongolia, downwind areas such as Yulin and Beijing, and long-range transported regions such as Korea(Anmyon and Gosan) and Japan(Noto). In general, relatively higher aerosol mass loadings with larger aerosol particles at desert regions were found. Aerosol Optical Depth(AOD) decreased significantly in downwind areas and long-range transported areas, which was accompanied by increased Angstrom exponents. This indicates the effects of aerosol mixing with various pollutants during transport of Asian dust plume on aerosol optical properties. Moreover, relatively high Single-Scattering Albedo(SSA) at 440 nm values ranging from 0.90 - 0.96 and increasing tendency of SSA with wavelength were observed at source region. The spectral dependence of SSA decreased during long-range transport.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.6
• /
• pp.617-623
• /
• 2016

Recently, IoT technology has been applied to the control of appliances in the home, and information about temperature, humidity, etc. is collected and the application of the system to control the indoor environment automatically is increasing. Currently, the network configuration of IoT devices is mainly used to connect IoT devices to the Internet through wireless gateways. Since such a method is dependent on a gateway, there are limitations in providing various services. Therefore, this paper proposes an independent method of gateway by using IoT network without using gateway by applying long distance wireless communication technology. IoT devices using the proposed long distance wireless internet technology can connect to a remote server and provide mobility that can not be supported by existing methods, thereby providing more various services. The performance evaluation of the proposed network configuration method is compared with the delay time and the amount of data generated in the existing network method constituted by the gateway and the proposed network configuration method respectively. Experimental results show that the proposed method decreases the delay time and the amount of data generated by the gateway.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.3
• /
• pp.514-522
• /
• 2015

In Microwave Radio Link, it is necessary to consider the radio fading to consistently assure the radio link of the high quality as the distance. If the fixed modulation is used for the microwave radio link, it is difficult to keep the high availability of link for the case of the long distance. Adaptive Modulation(AM) provide good quality on microwave link, but the application of the only-AM is not enough to provide the availability assurance due to the fluctuating characteristics of link capacity. Our previous study has proposed the improvement method of transmission in association with the distance, however the previous method needed to make up for the common application. There was no suggestion of a mathematical formula with a variable. In this paper, we propose an optimized Adaptive Transmission Techniques with calculating formula of the priority traffic transmission capacity based on AM in consideration of the fade margin for the availability assurance as the distance and the comparison of the channel bandwidth for Long-distance Radio Link.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.9A
• /
• pp.867-875
• /
• 2005

In this paper, we fabricated along distance wireless communication transmitter and receiver over the 100 which used NRD technology. To make the transmitter and receiver of 400Hz band using the non radiative dielectric wave guide, transmitter was composed of gm oscillator, m modulator and antenna, receiver was composed of local gum oscillator, balanced mixer, 3dB direction coupler and antenna. Also we executed a wireless communication image transmission examination to the transmitter and receiver. We receive the image information in real-time data transmission from receiver after we send the image signal in the wireless distance of the 10km. Therefore, the 400Hz band U transmitter and receiver to be developed will be used widely for the transmission system CATV or broadband transmission system. This will be utilized also to the link device of a long distance high speed wireless communication network.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.12B
• /
• pp.1468-1474
• /
• 2009

This paper shows an UHF RFID metallic tags using a Cavity structure for a long reading range. The reading range of a general passive tag is limited because the EIRP of a reader system is limited as 36㏈m by ISO 18000-6. To extend the reading range, the tag antenna should have a high gain antenna structure. The designed tag antenna is recognized over 10m range with a Cavity structure. The directivity pattern and the performance of the tag with the Cavity structure is stable when it is attached to a metallic object. The designed tag antenna has two kinds as cavity thickness. The sizes of designed tag antennas are $176\;{\times}\;52\;{\times}\;10\;mm$ and $176\;{\times}\;61\;{\times}\;30mm$ They can be attached to a large metallic materials and heavy equipments. The measured reading ranges of the tags are about 11m and 15m when they are attached to a metallic object.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2007.11a
• /
• pp.187-192
• /
• 2007

A project is being implemented to develop the long distance energy transport technology using the chemical reactions. This project can be classified into three main research categories covering heat recovery reaction, long distance energy transport, and heat generation reaction. In this study, the methanol is selected as a system material since it shows several unique superior characteristics as follows: gaseous state of reactant and product, large heat of reaction, high yields of reaction at relatively low temperature, and also steady and economical supply. Furthermore, it is anticipated that the outcomes of this study can be widely applied to the related industries. A feasibility study was carried out to evaluate the economics of this technology which study was based on the following case: 10,000 households, 15km distance energy transportation, utilization of waste heat from power plant.