• Resources Recycling
• /
• v.14 no.5 s.67
• /
• pp.32-39
• /
• 2005

Leaching behavior of nickel contained in waste Multi-Layer Ceramic Capacitor (MLCC) was investigated using a batch reactor. The effects of acid type, acid concentration, leaching temperature, particle size, and reaction time on the extraction of nickel metal from waste MLCC were examined. As a result, 97% of nickel contained in waste MLCC was leached out in 30 min at the temperature of $90^{\circ}C$ under the condition of $HNO_3$ concentration 1N, solid/liquid ratio 5 g/L and particle size $-300/+180{\mu}m$. It was also found that a Jander equation was useful to fit well the leaching rate data. The rate of nickel leaching is controlled by pore diffusion in $BaTiO_3$ layer and has an activation energy of 37.6 kJ/mol (9.0 kcal/mol).

• Journal of Practical Engineering Education
• /
• v.6 no.2
• /
• pp.105-110
• /
• 2014

In this work, mechanical characteristics of titanium diaphragm have been studied as a potential robust substrate and a diaphragm material for automotive tire pressure sensor. Lamination process techniques combined with traditional micromachining processes have been adopted as suitable fabrication technologies. To illustrate these principles, capacitive pressure sensors based on titanium diaphragm have been designed, fabricated and characterized. The fabrication process for micromachined titanium devices keeps the membrane and substrate being at the environment of 20 MPa pressure and $200^{\circ}C$ for a half hour and then subsequently cooled to $24^{\circ}C$. Each sensor uses a stainless steel substrate, a laminated titanium film as a suspended movable plate and a fixed, surface micromachined back electrode of electroplated nickel. The finite element method is adopted to investigate residual stresses formed in the process. Besides, out-of-plane deflections are calculated under pressures on the diaphragm. The sensitivity of the fabricated device is $9.45ppm\;kPa^{-1}$ with a net capacitance change of 0.18 pF over a range 0-210 kPa.

• Journal of fish pathology
• /
• v.12 no.1
• /
• pp.42-48
• /
• 1999

The disinfectant effects of total residual oxidants (TROs) produced by ozonization of natural sea water were investigated against fish pathogenic bacteria isolated from flounder and red seabream. The concentration of 0.1 mg TROs/liter was stable for 20 min in filtered natural seawater, and those of 0.3 and 0.5 mg TROs/liter were also stable for more 1 hr. Disinfectant effects of TRO against Edwardsiella tarda, Vibrio sp., Streptococcus sp. and Staphylococcus sp. were observed with a concentration of 0.1 mg/liter for 180 sec, and the treatment killed more than 99.9% of bacterial cells. With TROs of 0.3 to 0.5 mg/ liter, the viable cells of the bacteria were reduced by more than 99.99% in 60 sec.

• Resources Recycling
• /
• v.9 no.6
• /
• pp.45-52
• /
• 2000

Generally, the residues of EAF's dusts treated by reduction process at high temperature are disposed. If the residues can be recycled as iron sources of EAF by upgrading their iron contents, it can be expected to reduce the amounts of disposed wastes and the environmental impacts. Reduction of EAF's dusts mixed with millscale was carried out in rotary hearth furnace to upgrade iron contents of reduction residues. Dusts should be reduced rapidly to protect from reoxidation of reduced iron residue which can be reoxidized at high temperature. In our experimental conditions, optimum reduction time was about 40min. and iron contents of the residues were increased with increasing mixing ratio of millscale and upgrade to 85% at 50%wt mixing ratio. Zinc and lead contents in residues were about 3% and 0.5% respectively. The residues reduced rapidly must be recycled in EAF because heavy metal elements in the residues can be extracted easily and contaminate air and water.

• Membrane Journal
• /
• v.31 no.5
• /
• pp.327-332
• /
• 2021

The use of membranes for MBRWG (Membrane Bioreactor for Waste Gas) treatment can provide highly selective separation of a waste gas stream followed by effective biological removal. MBRWG have several potential advantages, among which the most distinctive one is separation of gas and liquid phases at each side of membrane potentially allowing the optimal biomass control toward effective biodegradation of target gases as well as biofilm activation. This advantage becomes especially favorable for removal of hydrophobic toxic gases, such as xylene, by MBRWG systems, because the mass transfer, the toxicity, and thereby the biodegradation of hydrophobic gas treatment requires sensitive handling of liquid stream and water control near biofilm. Among various membranes for MBRWG treatment, PDMS-hollow fiber membranes provide the high gas mass transfer. Despite lower specific surface areas, capillary type membranes are also applied current MBRWG studies. In addition to the main application of membranes as biofilm supporter in MBRWG systems, there can be another application of membranes in a posterior process for removal of residual gases or dusts emitted from conventional biological waste gas treatment processes.

• Applied Chemistry for Engineering
• /
• v.22 no.1
• /
• pp.31-36
• /
• 2011

Tetrafluoromethane ($CF_4$) has been used as the plasma etching and chemical vapor deposition (CVD) gas for semiconductor manufacturing processes. However, the gas need to be removed efficiently because of their strong absorption of infrared radiation and the long atmospheric lifetime which cause global warming effects. A waterjet gliding arc plasma system in which plasma is combined with the waterjet was developed to effectively produce OH radicals, resulting in efficient destruction of $CF_4$ gas. Design factors such as electrode shape, electrode angle, gas nozzle diameter, electrode gap, and electrode length were investigated. The highest $CF_4$ destruction of 93.4% was achieved at Arc 1 electrode shape, $20^{\circ}$ electrode angle, 3 mm gas nozzle diameter, 3 mm electrode gap and 120 mm electrode length.

• Journal of the Korean earth science society
• /
• v.43 no.5
• /
• pp.639-646
• /
• 2022

Occurrence of black opaque hydrocarbon (pyrobitumen) in some Cretaceous Jinju sandstones of the Sindong Group, Gyeongsang Basin in Korea is first reported in this study. The pyrobitumen is developed on chlorite pore-lining cement, or impregnated into the outer zone of chlorite cement. Therefore, it seems to have been formed after the precipitation of chlorite cement, indicating the former presence of crude oil. The liquid hydrocarbons migrated into sandstones during moderate burial and these sandstones seem to have acted as a liquid hydrocarbon reservoir. The presence of pyrobitumen in the Jinju Formation indicates that this formation underwent deep burial after liquid hydrocarbon migration. As reservoir temperatures increased further, hydrocarbons were cracked and a solid pyrobitumen residue remained in the reservoir.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.226-226
• /
• 2021

Tetractycline은 sulfonamides, penicilines 등과 함께 축산계에서 널리 사용되는 대표적인 항생물질의 한 종류이다. 2011년 사료 내 항생제 투여를 금지한 이후 자가치료 및 예방용으로 사용되고 있으며, 가축의 체내로 투여되는 tetracycline는 주로 분뇨에 포함되어 배출되는데, 강우 등 물 순환에 따라 지표수 및 지하수로 이동하여 미생물에 독성을 일으키거나 내성균이 발생하기도 한다. Tetracycline 등의 항생물질 처리 방식으로 흡착 등 다양한 공정이 제시되고 있다. 본 연구에서는 산화제 중 하나인 ferrate(VI)를 이용하여 tetracycline 분해실험을 수행하였다. ferrate(VI)는 염소산화물 및 H₂O₂에 비해 비교적 강한 산화력을 가지며, 처리 후 발생되는 철염(Fe³⁺)은 독성이 없다는 장점이 있다. Ferrate(VI)는 병원균 제거 등에 효과적인 것으로 알려져 있으며, 다양한 난분해성 물질과 항생물질을 성공적으로 분해하여 그 효과를 입증한 바 있다. 본 연구에서는 자체적으로 제조한 potassium ferrate(VI)를 이용하여 다양한 수중 환경에서 tetracycline를 분해하고, 분해특성 및 중간생성물 연구를 수행하였다. Ferrate(VI)는 염기성 환경에서 tetracycline 분해효율이 가장 높은 것으로 나타났으며, 이는 pH에 따른 tetracycline과 ferrate(VI)의 이온화가 가장 큰 원인인 것으로 판단된다. 특히 ferrate(VI)는 pH가 낮을수록 쉽게 환원되는 특징이 있으며, 염기성으로 갈수록 안정화하여 오래 잔류하므로 이러한 결과가 나타난 것으로 판단된다. 중간생성물 조사 결과, ferrate(VI)와 tetracycline 사이의 분해 메커니즘은 주로 OH 라디칼로 인한 것이 대부분이며, hydroxylation과 amino group에서의 demethylation의 형태로 발생하였다. 이후 추가적인 반응으로 benzene ring이 깨지면서 결과적으로 CO₂ 및 H₂O 등으로 무기물화 되는 것으로 판단된다.

• Analytical Science and Technology
• /
• v.21 no.3
• /
• pp.201-211
• /
• 2008

The treatment efficiency of PCBs containing wastes has been investigated. The samples treated by electron beam and de-chlorination method were analyzed to verify the byproducts before treatment and after treatment. In the treated samples by electron beam irradiation, PCBs were not detected by comparing the peak matching using the Korean official waste test method. On the other hand, PCBs congeners were detected by analyzing individual isotope method using HRGC/HRMS. Most of PCB congeners in waste were decomposed to 3-chlorobiphenyls, lower chlorinated congener produced during the treatment of electron beam. In the chemical dechlorination treatment, it was found that the concentrations of PCBs in treated samples were lower than those of regulation criteria in Waste & POPs management law and the after treatment concentration were satisfied to the regulation criteria. Also, dioxins were not observed after the physio-chemical treatment processes of PCBs containing wastes.

• Clinical and Experimental Pediatrics
• /
• v.52 no.4
• /
• pp.494-498
• /
• 2009

Purpose : Applicability of transcatheter closure of atrial septal defect (ASD) has been expanded by accumulation of clinical experiences and evolutions of the device. This study was performed to evaluate the safety and efficacy of transcatheter closure of ASD with Amplatzer septal occluder (ASO) in young children less than 3 years of age. Methods : From May 2003 to December 2005, 295 patients underwent transcatheter closure of ASD with ASO in the Severance Cardiovascular Hospital, Yonsei University Health System. Among them, 51 patients less than 3 years of age were enrolled in this study. We investigated procedural success rate, rate of residual shunt, frequency of complications, procedure/fluoroscopy time, and need of modified techniques for device implantation. Results : The median age was 2.1 years and median body weight was 12 kg. Implantation of device was successful in 50 patients (98%). Seven patients (15%) showed a small residual shunt 1 day after the procedure, but complete occlusion had been documented at 6 month follow-up in all patients (100%). The pulmonary to systemic flow ratio (Qp/Qs), peak systolic pulmonary artery pressure, and peak systolic right ventricular pressure had decreased significantly after closure of ASD. There were 2 complications including device embolization (1, 2%) and temporary groin hematoma (1, 2%). Conclusion : Transcatheter closure of ASD with ASO can be performed with satisfactory results and acceptable risk even in young children less than 3 years of age. We could suggest that even in very young children with ASD, there is no need to wait until they grow to a sufficient size for the transcatheter closure.