• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.6
• /
• pp.581-586
• /
• 2018

Cast iron manhole lids cause environmental pollution during the manufacturing process, and the work environment is very poor. In addition, if the height of the manhole cover does not match the height of the road surface, it causes considerable inconvenience and safety problems. This study proposes a height - adjustable steel manhole cover that can replace cast iron manhole covers and easily match the road surface with the upper surface of the manhole cover. Structural analysis was performed to grasp the design variable of the structure of the manhole cover, satisfying the required quality performance. To fabricate a manhole cover that satisfies the required load capacity, the optimal design for the U-shaped reinforcement structure was made. The cylindrical shape of the height adjustment part and the low frame were formed by bending the steel sheet into a circular shape and then welding. Reinforcing bars were also made by bending a steel plate. The height adjustment groove was machined by a CNC milling machine. Four prototypes were fabricated and a load bearing test was carried out, and new manhole cover was made reflecting results of the test. In the load bearing test, there was no breakage of the welded part, and deformation occurred mainly at the contact area between the groove and gusset plate. Deformation of 1 to 2.7mm occurred due to a load of 450kN. On the other hand, after removing the load, there was almost no residual deformation, and the load bearing evaluation was judged to be satisfactory because the manhole cover could be disassembled and reassembled.

• Journal of KIISE:Computing Practices and Letters
• /
• v.11 no.1
• /
• pp.15-25
• /
• 2005

Embedded systems have a set of tasks to execute. These tasks can be implemented either on application specific hardware or as software running on a specific processor. The design of an embedded system involves the selection of hardware software resources, Partition of tasks into hardware and software, and performance evaluation. An accurate estimation of execution time for extreme cases (best and worst case) is important for hardware/software codesign. A tighter estimation of the execution time bound nay allow the use of a slower processor to execute the code and may help lower the system cost. In this paper, we consider an ARM-based embedded system and developed a tool to estimate the tight boundary of execution time of a task with loop bounds and any additional program path information. The tool we developed is based on an exiting timing analysis tool named 'Cinderella' which currently supports i960 and m68k architectures. We add a module to handle ARM ELF object file, which extracts control flow and debugging information, and a module to handle ARM instruction set so that the new tool can support ARM processor. We validate the tool by comparing the estimated bound of execution time with the run-time execution time measured by ARMulator for a selected bechmark programs.

• Journal of Music and Human Behavior
• /
• v.12 no.1
• /
• pp.1-21
• /
• 2015

This study examined the effects of a tablet PC-based music-making program on the executive function of adolescents with intellectual disabilities. Four adolescents with intellectual disabilities participated in this program. Each participant received 45-minute individual sessions twice a week for a total of 16 sessions. The music-making program was designed in the sequence of planning; learning table PC operations; exploring musical elements; making rhythm, melody, and lyrics; composing loop sections; and presentation of the completed music. The Stroop test, Children's Color Trails Test, and Digit Span and Letter-Number sequencing tests were measured at pretest, midtest, and posttest in order to examine changes in executive function. The participants showed increased scores on all three tests. The participants' attention span also increased and their attempts to correct errors during tasks occurred more frequently at posttest. This study supports the effects of the technology-based program on the executive function of adolescents with intellectual disabilities and presents its expanded applicability for adolescents who show low cognitive function and limited motivation for cognitive engagement.

• Journal of Korean Society of Forest Science
• /
• v.95 no.1
• /
• pp.73-81
• /
• 2006

This study has the object of deriving schemes for not only securing safety of chestnuts, which is the most important forest product in terms of both production and exportation, to consumers with implementing persistent production of them in harmony with the environment, but also producing environmentally friendly chestnuts that can contribute to the increase of a farm household's income through price differentiation from other chestnuts, which are grown by generally accepted ways. In order to do this, I performed an analysis of the reality and outcome from the management of farm households that produce environmentally friendly chestnuts. The result of the analysis demonstrated some problems such as poor establishment of farming skills in a beginning stage, administrative problems with weeding operations and prevention of blight, difficulty in ensuring distribution channels and high production cost. Therefore, propelling productive expansion of environmentally friendly chestnuts after resolving these problems requires many supports and ideas: establishment and diffusion of farming skill system under the cooperation of civil and government organizations, construction of environmentally friendly INM (Integrated Nutrient Management) and IPM (Integrated Pest Management), creation of production areas for improving productivity, introduction of 'Institution of Income Conservation for Environmentally-Friendly Production' that can help farmers to preserve integrity of income on their switchover to production of environmentally friendly chestnuts from generally-grown chestnuts, and finally strong and persistent promotion of environmentally friendly chestnuts towards existing farmers and consumers.

• Journal of Korea Soil Environment Society
• /
• v.3 no.2
• /
• pp.101-114
• /
• 1998

Soil vapor extraction (SVE) is known to be an effective process to remove the contaminants from the soils by enhancing the vaporization of organic compounds using forced vapor flows or applying vacuum through soils. Experiments are carried out to investigate the effects of the organic contaminants, types of soils, and water contents on the removal efficiency with operating time. In the study, simulated soils include the glass bead which has no micropore, sand and molecular sieve which has a large volume of micropores. As model organic pollutants, toluene, methyl ethyl ketone, and trichloroethylene are selected. Desorption experiments are conducted by flowing nitrogen gas. Under the experimental conditions, it is found that there are linear relationships between logarithm of removal efficiency and logarithm of number of pore volumes. The number of pore volumes are defined as the total amount of air flow through the soil column divided by the pore volume of soil column. For three organic compounds studied, the removal rate is slow for no water content, while the number of pore volumes for removal of organic compounds are notably reduced for water contents up to 37%. For the removal of dense organic compound, such as trichloroethylene, a large number of pore volumes are needed. Also, the effects of the characteristics of simulated soils on the removal efficiency of organic compounds are studied. After the characterization of soil surface, porosity of soil columns and types of contaminants, the results could provide a basis for the design of SVE process.

• Fire Science and Engineering
• /
• v.31 no.6
• /
• pp.107-111
• /
• 2017

The purpose of this study was to develop a Eco smoking booth that can effectively reduce hazardous pollutants generated during smoking and evaluate the efficiency and effectiveness of removing hazardous pollutants. The design and manufacture of an eco-friendly automatic smoking booth equipped with deodorizing facilities, such as inlet - HEPA filter - electrostatic precipitator (EP) - impregnated activated carbon - exhaust port, etc., and the efficiency of removing hazardous pollutants from inside and outside was measured and evaluated. The complex odor removal efficiency was 95.37% inside the smoking booth, and 97.38% at the exit of the preventive facility. The carbon monoxide removal efficiency was 94.25% in the inside and 98.32% in the outlet. In addition, the removal efficiency of particulate matter, (PM1, PM2.5, and PM10) inside the smoking booth was 98.59%, and 98.85% at the outlet. The total volatile organic compounds (TVOCs) decreased from $26,000{\mu}g/m^3$ to $5,203{\mu}g/m^3$ in the smoking booth, resulting in 79.99% removal efficiency. After the ventilator was operated, the measured effluent concentration was $5,019{\mu}g/m^3$, and the removal efficiency was 80.70%. Therefore, the smoking booth designed and manufactured through this study can be applied to the removal of harmful pollutants even in the small working environment in the future.

• Korean journal of food and cookery science
• /
• v.31 no.1
• /
• pp.41-52
• /
• 2015

The substitute tea was manufactured from the leaves of Salvia plebeia R. Br. (SPR) that have anti-inflammatory and antioxidative activities. Total polyphenols and flavonoids in SPR were $71.8{\pm}4.74GAE\;mg/g$ and $38.7{\pm}2.95QUE\;mg/g$, respectively. DPPH radical scavenging activity of SPR water extract had an $RC_{50}$ of $16.9{\mu}g/mL$. SPR inhibited lipopolysaccharide (LPS)-induced nitric oxide (NO) production with an $IC_{50}$ of > $100{\mu}g/mL$. Medium and large leaves were used in the SPR substitute tea (SPRT). The water content was dissipated on roasting within approximately 10 minutes, and the tea obtained from fan-firing for a total 120 minutes was evaluated as most superior. Flavor was positively correlated with the taste and general preference. SPRT maintained its anti-oxidative activity without significant changes on roasting or fan-firing even after the heat treatment. The appropriate weight of a tea bag for one serving was 1.0 g. The study results indicated that SPR is a potential resource for the development of food or ingredients with anti-inflammatory properties.

• Therapeutic Science for Rehabilitation
• /
• v.6 no.1
• /
• pp.35-43
• /
• 2017

Objective : To identify the effect of symmetrical and asymmetric bilateral training For stroke patients in upper extremity recovery. Methods : 15 patients with stroke, randomized to an in- phase group(n =7) and anti-phase group(n =8). Each groups received symmetrical and asymmetric bilateral training, 30-min sessions per a day for 5 weeks, total 20 session.Accelerometer was used to evaluate the amount used for both groups. Y-BAT was used to evaluate performance status and satisfaction, ARAT was used to evaluate hand function. Results : the amount used of symmetrical movement training showed significant changes in affected and unaffected side. asymmetric bilateral training. there is a significant difference in affected side before and after receiving asymmetric bilateral training. Also, There was a significant difference between the groups on the affected side. Both training, there was no significant difference in performance, satisfaction, and upper limb function between group but, there was significant differences within-groups, Conclusions : Symmetric training showed higher motor performance than asymmetric training, but, To obtain a clearer difference, it would be necessary to use a neuromuscular assessment tool such as fMRI. Also, need a clearer training protocol and the need for follow-up studies on more stroke patients is suggested.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.6_1
• /
• pp.539-547
• /
• 2012

Volume survey for earthwork is conducted periodically at every month at large scaled construction sites for request payment for the construction. Currently, the earthwork volume is calculated on the overlapped drawing for two cross sections which were created by new and previous surveying data observed by GPS and TS. However the survey is required lots of time and expenses as it is a pin-point surveying method thus surveyors intend to get data only for the heavy undulated topographic features chosen by himself to save time and expenses. Consequently, it causes poor results due to low dense measurement as well as it's not matched with the results by another surveyors. As a result, the conflicts related in earthwork volume calculation often arises among the owner, contractors and sub contractors. In this study, we developed a method to get surveying data for fast and accurate volume calculation using 3D Mobile Laser System and conducted an application test. Also we carried out experiments for topographic survey using MLS to judge for the application additionally. The results showed that we could reduce a time for cross section survey from 48 hours to 2 hours and collected high dense data which have 0.2m interval instead of 3m interval compare with existing method. Also we could make a map which has high accuracy within 10cm in horizontal through topographic survey using MLS.

• Archives of design research
• /
• v.16 no.1
• /
• pp.35-44
• /
• 2003

In the past era, acquisition and utilization of useful information was the main origin of competition. Nowadays, unlike that era, is the era of knowledge information(management) in which we should create a new knowledge on the basis of information and apply it to the field of practice. And more acquisition of information is no more the competitive power of any person, any company and any nation because in such the era of knowledge management, anyone can access and get the information he needs, utilizing internet-based searching system. Such demands of the times of knowledge management change rapidly in each field through knowledge management system and researches about knowledge management are actively processed in various academic branches. However, in our field of design, researches about those demands(knowledge management) still remain on the level of one-dimensional searching service for general data about design. Therefore, in this study, we developed building database of researches on form, color, aesthetical elements, preference image word, satisfaction etc. about CI/BI of home electronics goods, living goods, apparels, and food goods companies, also suggesting searching system through which you can obtain useful data and information helpful for designers to process CI/BI works of new product by using that database. Especially, in case of developing specific CI/BI, various search results through help of suggested system will supply a useful design concept. And more, cross table which is the result of analysis two-dimensional categorical data about existing design factors(such as form, color, aesthetical elements, preference image word, and satisfaction) will make contribution for designers to create a new design knowledge.