• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2023.11a
• /
• pp.149-150
• /
• 2023

많은 인원을 필요로 하는 조선업은 선박을 건조하는 현장의 제품들이 복합 공정이면서도 중후장대한 특성을 가지고 있다. 이러한 선박을 건조할 때는 종사하는 작업자 간의 작업 내용에 대한 의논과 방법의 결정에 따른 경험기술의 활용도가 높다. 그래서 작업자별 작업 방법이나 기능의 차이가 많고 그 차이만큼이나 공정 진척이나 품질에 대한 결과도 다르게 나타나게 된다. 하지만 인력 집약도가 높은 조선소 작업인력이 퇴직이나 이직 등으로 발생되는 공백을 내국인으로 채우지 못하고 경험이 없고 소통도 어려운 외국인 작업자로 대체하고 있는 실정이다. 외국계 작업자의 경우 인건비가 낮은 중소기업이나 대기업의 하도급 업체에 고용이 되는데 중소기업의 특성상 기술력의 축적이나 안전작업을 위한 사전 직무교육 등에는 여유가 없어 제한된 기간 동안의 고용이나 단순 업무에만 종사토록 하는 등의 방법으로 활용해왔다. 그러나 외국계 작업자의 고용 비중이 높아지면서 전반적인 생산성의 한계와 불안전 작업에 대한 우려로 그 관심도 높아지고 있다. 외국계 작업자의 경우 생산 현장에서 이루어지고 있는 각종 안전관련 교육이나 행사, 동료간의 소통등에 소외되면서 불안전이 가중되고있고 비자종류에 따라 체류기간이 한정되어 기술력의 유지는 어려운 현실이 될 수 밖에 없다. 이러한 외국계 작업자에게 안전에 대한 수준을 높이기 위한 방안으로 직무별 위험성평가도 작업자의 논높이에 맞게 해야 한다. 현재 활용되고 있는 4가지 위험성평가 방법을 일부 보완하여 안전수준에 맞게 실시하여 작업자 개인별 직무 수행상의 위험성에 대한 이해도가 안전에 미치는 영향을 최소화 하여 안전을 유지시키는 방안을 연구한다. 위험성평가의 취지가 기본적으로 해당 작업자 전원참여라는 중요 요소임을 감안할 때 외국인 작업자의 직무 이해도 점검은 매우 중요하다 하겠다.

• Proceedings of the KAIS Fall Conference
• /
• 2009.12a
• /
• pp.739-742
• /
• 2009

대형 트럭의 적재함 제조 공장의 경우 전 공정이 인력에 의존하는 강도 높은 제조 현장이다. 특히 적재함의 양 측면 게이트 고정 작업의 경우 약 7명 정도의 인력이 투입되어 드릴링 및 조립 작업을 수행한다. 또한 드릴링 작업은 작업자의 손목이 손상되는 사고를 빈번히 일으키고 있는 위험 작업이다. 본 연구에서는 이와 같은 일련의 작업을 작업자 2인이 수행할 수 있도록 설계하고 제작하는 것에 그 목적이 있다. 본 논문에서는 자동 드릴링 머신을 개발하기위한 기구적 및 시스템 설계, 제어 방법에 대해 소개한다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2022.07a
• /
• pp.437-438
• /
• 2022

현재 산업현장은 작업한 인부들이 작업을 마치고 청소하는 식으로 현장의 청결을 유지한다. 본 연구에서는 산업현장의 청결을 보다 깨끗하고 안전하게 유지하여 안전사고 발생의 요인이 되는 것을 제거하는 것을 전제로 하여 현재 상용화 되고 있는 로봇청소기와 아두이노를 이용한 센서를 적용하고자 한다. 본 논문은 기존의 로봇청소기에 미세먼지 센서와 유해가스 센서를 탑재하여 산업현장의 환경을 감지하도록 한다. 산업 현장의 미세먼지 농도가 일정 수치 이상이면, 로봇청소기를 작동하도록 한다. 로봇청소기에 공기청정기와 전자석을 추가하여 산업현장의 공기를 쾌적하게 조성하며, 미세 금속 이물질을 처리하는 기능을 탑재하여 산업현장에서 발생하는 이물질을 보다 쉽게 처리하도록 한다. 유해가스 농도가 일정 수치 이상이면, 부저를 통해 경보를 울려 산업현장 내부에 유해가스가 유출되고 있다고 알려준다. 또한, 블루투스 통신을 통해 스마트폰 어플리케이션으로 센서의 값을 확인하여 DC모터, 공기청정기, 전자석 등을 수동조작해 청소되지 않은 부분을 청소하도록 할 수 있다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.6
• /
• pp.2509-2518
• /
• 2013

Augmented reality (AR) technology visualizes a real type object that cannot simulate in virtual reality technology by overlapping a virtual object and real object in a computer system. This study suggests a methodology and prototype system for applying AR system to rebar distribution work in a civil engineering project. Rebar work in civil engineering project is a representative activity that is progressed by empirical approach of skilled labor rather than formalized manual. AR technology improves the constructability of rebar work because AR tool can identify missing rebars and different rebars comparing with the drawings. AR system developed in this study can enhance the understanding of rebar work using 3D modeling with real image of construction site and save construction cost by reducing reconstruction work.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.262-267
• /
• 2008

The domestic construction market started to expand steadily since 1970s. The building market which utilizes a sandwich panel with advantages of economical construction expenses and convenient construction has grown rapidly in recent years. However, the companies which specialize in constructing sandwich panels are relatively small or medium size, compared with other construction companies. As a result, studies on the improvement of productivity have not been conducted sufficiently. In this study, the construction sites of sandwich panel are investigated, and the work processes by each team are analyzed. Additionally, the productivity and the construction cost of each construction team are analyzed by constructing a model using the Web-Cyclone. It is expected that the results of this study can be applied to estimate the productivity and the construction cost of a sandwich panel construction that is appropriate for the on-site characteristics of small and medium sized construction companies in Korea. Also, similar processes can be simulated based on the modeling constructed in this study.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.426-431
• /
• 2016

In quay processes in shipyards, it is difficult to manage workers and to maintain secure working environments because at least 1,000 people can occupy the quay at the same time. In this study, a system was designed to monitor the environment and processes of quay operation. In order to lower initial investments and the costs of maintenance and operation, the entire system consists of six connected components. Considering the communication environment of the shipyard site, Wi-Fi and the LoRa communication protocol were selected for the system. The feasibility of the communication protocols was verified by data transmission tests in the field. The designed system can provide real-time information about employees working in the quay area, the safety status of moored ships on the quay, and step-by-step alarms in dangerous situations based on the detected information. The system is expected to prevent or greatly reduce safety hazards.

• Journal of agriculture & life science
• /
• v.53 no.6
• /
• pp.35-44
• /
• 2019

The objectives of this study were to identify engineering problems in the design and installation of cable logging operation that affects productivity through case study of actual logging sites, and to analyze associated productivity loss and increased cost. As a result of the study, when the geographic conditions and engineering safety of the site are not sufficiently considered, deflection of the cable line can not be secured. Hourly productivity of the operation decreased to 65% and the logging cost increased by more than two times compared to the productive yarding operation, which lowered overall efficiency of the operation. Thus, it is required to spread filed technologies that minimize unnecessary production cost incurred due to the in-efficient logging operations as well as secure work safety and efficiency to expand cable logging operation throughout the country.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.24 no.2
• /
• pp.41-49
• /
• 2024

This paper discusses the modeling and implementation of a worker location system at a shipbuilding site. The importance of worker location in an industrial environment is highlighted as a critical element in the prevention of industrial accidents. The paper presents a worker tracking system that integrates power line and beacon communication to accurately track worker position. Through experiments, the paper demonstrates how to monitor the changes in worker location based on different scenarios and how to access the status of worker location using the manager's web service. The paper can be used for the design of a system that will provide real-time location information to safety managers for the improvement of worker safety management.

• Explosives and Blasting
• /
• v.38 no.2
• /
• pp.22-35
• /
• 2020

Recently, electronic detonators have been widely used in various sites. Electronic detonators are often used for the purpose of reducing the noise and vibration produced by blasting. In addition, electronic detonators are used for precision blasting at sites where mechanical excavation techniques are applied due to proximity of safety things or where blasting by conventional detonators are not possible. Various technologies are being attempted at the blasting site to increase constructivity and lower production costs by using electronic detonators. In this paper, we would like to introduce a construction case that use of electronic detonators in the situation of safety things being adjacent increases the efficiency of construction while meeting the ground vibration criteria of Ministry of Land, Infrastructure, and Transport. The blasting was carried out at domestic and overseas shaft using HiTRONIC II™, produced by Hanwha. Generally the shaft blasting is performed by dividing the blasting surface because of the noise and vibration caused by the blasting. but, in the case introduced in this paper, the blasting was carried out once without dividing the blasting surface, thus the construction period could be shortened.

• Journal of the Korean GEO-environmental Society
• /
• v.14 no.4
• /
• pp.47-52
• /
• 2013

In Korea, the number of mining operations are getting smaller. But buried accidents are on the increase every year. For this reason, it is important to safety management in construction process, especially the worker's safety. In the field of construction needs utilization of integration system according to purpose of utilization, particularly in underground construction sites utilizing is emphasized even more. The current element technologies of location tracking, sensors and wireless communication possible to utilize but it is still difficult to utilization of integration system in construction field because a study is not complete on commercialization and availability. In this study, for real time 3-dimensional management of ubiquitous construction site in ground and underground, measure data using MEMS sensor, EDM and DGPS in 2 test site. Also results were analysed by MATLAB. As a result, error is verification less than 3 meter that possible to distinguish with the naked eye and construct direction of study based on result of former.