• Journal of the Mineralogical Society of Korea
• /
• v.28 no.1
• /
• pp.29-38
• /
• 2015

Cyanide can be leached out from the cyanidation method which has been used to extract high-purity gold and silver from ores, and it becomes a variety of cyanide complexes associated with heavy metals contained in ores. Such cyanide complexes are considered as persistent and non-degradable pollutants which cause adverse effects on humans and surrounding environments. Based on binding force between heavy metals and cyanide, cyanide complexes can be categorized weak acid dissociable (WAD) and strong acid dissociable (SAD). This study comparatively evaluated the performance of photo-catalytic process with regard to forms of cyanide complexes. In particular, both effects of UV LED wavelength and surface modification of photo-catalyst on the removal efficiency of cyanide complexes were investigated in detail. The results indicate that the performance of photo-catalytic oxidation is significantly affected by the form of cyanide complexes. In addition, the effect of UV LED wavelength on the removal efficiency was quite different between free cyanide and cyanide complexes associated with heavy metals. The results support that the surface modification of photo-catalyst, such as doping can improve overall performance of photo-catalytic oxidation of cyanide complexes.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.1
• /
• pp.34-44
• /
• 2015

This study was initiated to remove free cyanide from wastewater using the process of photocatalytic oxidation. UV lamp has been extensively used as a light source in conventional photocatalytic oxidation, but numerous drawbacks of UV lamp have been raised so far. Thus, this study focused on evaluating the applicability of UV LED as an alternative light source to overcome the drawbacks of UV lamp. Furthermore, the effects of diverse operational parameters on the performance of process were investigated. The results demonstrated the applicability of UV LED as a substitute of UV lamp. Also, the results show that the performance of process was improved by the increase in the number of UV LEDs used. To acquire economic feasibility as well as high efficacy, however, it is required to determine the optimum number of UV LED prior to practical implementation of the process. Among the three types of photocatalysts (anatase, rutile, and Degussa P25) tested, the Degussa P25 showed the greatest performance, and it was proven that the process was not improved as much as the Degussa P25 through simple mixing of anatase and rutile without any pretreatment. In addition, the removal efficiency of free cyanide appeared to be increased with the decrease in the particle size of $TiO_2$ photocatalyst. Besides, the process was enhanced with injection of oxygen which is considered as a major electron acceptor in the photocatalytic oxidation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.1A
• /
• pp.43-47
• /
• 2000

In regions of low signal-to-noise ratio (SNR), performance analysis uses simulations of hybrid concatenated coding systems. However, for higher SNR regions beyond simulation capabilities, average upper bounds to bit error rate (BER) and word error rate (WER) are used. In [1], all weight enumerating functions are needed to obtain average bounds. In this paper, we use RSC as constituent codes, by using effective free distances instead of WEF, we derive average BER and WER bounds of hybrid concatenated convolutional codes (HCCC) and analyze the BER and WER over AWGN and Rayleigh/Rician fading channels.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.6
• /
• pp.1273-1280
• /
• 2013

The UKF algorithm for tracking moving objects has fast convergence speed and good tracking performance without the derivative computation. However, this algorithm has serious drawbacks which limit its use in conditions such as Gaussian noise distribution. Meanwhile, the particle filter(PF) is a state estimation method applied to nonlinear and non-Gaussian systems without these limitations. But this method also has some disadvantages such as computation increase as the number of particles rises. In this paper, we propose the Unscented Particle Filter (UPF) algorithm which combines Unscented Kalman Filter (UKF) and Particle Filter (PF) in order to overcome these drawbacks.The performance of the UPF algorithm was tested to compare with Particle Filter using a 2-DOF (Degree of Freedom) Pendulum System. The results show that the proposed algorithm is more suitable to the nonlinear and non-Gaussian state estimation compared with PF.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.3A
• /
• pp.406-411
• /
• 2000

In wireless ATM system, powerful FEC code is required for highly reliable data transmission. In this paper, we propose an adaptive hybrid ARQ scheme using RCPSCCC for WATM system. The code rate of RCPSCC is adjusted to match channel conditions and data types. By using only the effective free distances of outer and inner encoders, we derive upper bounds of the bit and word error probabilities over Rayleigh and Rician fading channels. By applying RCPSCC to the adaptive hybrid ARQ protocol, highly reliable data transmission can be achieved.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.12A
• /
• pp.1862-1867
• /
• 1999

In wireless ATM system, powerful FEC code is required for highly reliable data transmission. In this paper, we propose an adaptive hybrid ARQ scheme using RCPSCCC for WATM system. The code rate of RCPSCCC is adjusted to match channel conditions and data types. By using only the effective free distances of outer and inner encoders, we derive upper bounds of the bit and word error probabilities over Rayleigh and Rician fading channels. By applying RCPSCCC to the adaptive hybrid ARQ protocol, highly reliable data transmission can be achieved.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.611-617
• /
• 2018

The application of health monitoring, including a fault detection technique, is needed to secure the structural safety of large structures. A 2-step crack identification method for detecting the crack location and size of the beam structure is presented. First, a crack occurrence region was estimated using the modified Laplacian operator for the strain mode shape obtained from the distributed local strain data. The crack location and size were then identified based on the natural frequencies obtained from the acceleration data and the neural network technique for the pre-estimated crack occurrence region. The natural frequencies of a cracked beam were calculated based on an equivalent bending stiffness induced by the energy method, and used to generate the training patterns of the neural network. An experimental study was carried out on an aluminum cantilever beam to verify the present method for crack identification. Cracks were produced on the beam, and free vibration tests were performed. A crack occurrence region was estimated using the modified Laplacian operator for the strain mode shape, and the crack location and size were assessed using the natural frequencies and neural network technique. The identified crack occurrence region agrees well with the exact one, and the accuracy of the estimation results for the crack location and size could be enhanced considerably for 3 damage cases. The presented method could be applied effectively to the structural health monitoring of large structures.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.11
• /
• pp.19-29
• /
• 2001

The Pan-European Digital Audio Broadcasting(DAH) system's performance is characterized and improved with the aid of turbo codec. From the fact that the first bit among the four coded bits at the RCPC coding defined in the Eureka 147 DAD system is not. punctured and always transmitted, this paper proposes a new turbo coded DAB system model that replaces the existing RCPC codec by a turbo codec without modifying the puncturing procedure and puncturing vectors defined in the standard DAB system for compatibility. The performance of a new system is compared to that of the conventional system under the Rician fading channel and the Rayleigh fading channel in conjunction with DAD transmission mode I and III suitable for the terrestrial single frequency network and satellite broadcasting.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.2
• /
• pp.176-187
• /
• 2002

The digital Audio Broadcasting (DAB) system adopts Coded OFDM(COFDM) for channel coding. The COFDM is a combined technique of multicarrier transmission(OFDM) and punctured convolutional coding with viterbi error correction. Because the channel coding is an important topic for OFDM systems, this paper proposes a new turbo coded OFDM system that replaces the existing RCPC codec by a turbo codec without modifying the puncturing procedure and puncturing vectors defined in the standard DAB system for compatibility. The performance of a new system is compared to that of the conventional system under the frequency selective Rician fading channel and the frequency selective Rayleigh fading channel in conjunction with DAB transmission mode I suitable for the terrestrial single frequency network(SFN) broadcasting. The standard system's performance was improved with the aid of turbo codec.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.6
• /
• pp.48-60
• /
• 2011

Nowadays, the 3D community is actively researching on 3D imaging and free-viewpoint video (FVV). The free-viewpoint rendering in multi-view video, virtually move through the scenes in order to create different viewpoints, has become a popular topic in 3D research that can lead to various applications. However, there are restrictions of cost-effectiveness and occupying large bandwidth in video transmission. An alternative to solve this problem is to generate virtual views using a single texture image and a corresponding depth image. A critical issue on generating virtual views is that the regions occluded by the foreground (FG) objects in the original views may become visible in the synthesized views. Filling this disocclusions (holes) in a visually plausible manner determines the quality of synthesis results. In this paper, a new approach for handling disocclusions using depth based inpainting algorithm in synthesized views is presented. Patch based non-parametric texture synthesis which shows excellent performance has two critical elements: determining where to fill first and determining what patch to be copied. In this work, a noise-robust filling priority using the structure tensor of Hessian matrix is proposed. Moreover, a patch matching algorithm excluding foreground region using depth map and considering epipolar line is proposed. Superiority of the proposed method over the existing methods is proved by comparing the experimental results.