• Journal of the Korean Institute of Gas
• /
• v.27 no.2
• /
• pp.71-78
• /
• 2023

In general, electric submersible pumps (ESPs), which have an average life of 1.0 to 1.5 years, experience a decrease in performance and a reduction in life of the pump depending on oil and gas reservoir characteristics and operating conditions in wells. As the result, the failure of ESP causes high well workover costs due to retrieval and installation, and additional costs due to shut down. In this study, a flow loop system was designed and established to predict the life of ESP in long­term operation of oil and gas wells, and the life cycle data of ESP from the time of installation to the time of failure was acquired and analyzed. Among the data acquired from the system, flow rate, inlet and outlet temperature and pressure, and the data of the vibrator installed on the outside of ESP were analyzed, and then the performance status according to long-term operation was classified into five stages: normal, advice I, advice II, maintenance, and failed. Through the experiments, it was found that there was a difference in the data trend by stage during the long­term operation of the ESP, and then the condition of the ESP was diagnosed and the failure of the pump was predicted according to the operating time. The results derived from this study can be used to develop a failure prediction program and data analysis algorithm for monitoring the condition of ESPs operated in oil and gas wells.

• 한국노년학
• /
• v.39 no.3
• /
• pp.531-548
• /
• 2019

The purpose of this study is to provide basic data in order to improve service quality based on empirical analyses about a relationship among positive psychological capitals, service quality, and job satisfaction of professional care workers under the Long-Term Care Insurance in South Korea. In this study, total 430 numbers of the workers who were currently working in nursing homes for the elderly at the cities of Ansan, Anyang, Bucheon, and Kwangmyeong in Gyeonggi Province, South Korea, participated in self-report questionnaires. Only 393 questionnaires were used for the final analyses after excluding the ones that neither were not returned nor didn't completed it all. These are major results. First, positive psychological capitals affect positively on service quality. Second, job satisfaction works as a mediating effect in the process of positive psychological capitals affect on service quality. Based on above results, it is possible to suggest it as down below. First, it is required to have policies that will be helpful for both positive psychological capitals and capacity building through human resource management in systematic approaches. Second, it is also required to acknowledge that having positive psychological capitals is effective to improve both their job satisfaction and service quality. Therefore, it is necessary to change environmental circumstances in relevant institutions where this acknowledgement will be applied.

• Journal of Venture Innovation
• /
• v.5 no.4
• /
• pp.57-74
• /
• 2022

The purpose of this study is to verify the influence of SME members' motivation and creative working environment on innovative behavior and to see differences according to individual absorptive capacity. As a research method for this, 350 copies were collected by requesting a specialized research company for employees who have worked at SMEs for more than a year, and research models and hypotheses were verified with SPSS 28 and Smart PLS 3. As a result of the study, approach motivation and creative work environment had a positive effect on individual innovation behavior, which showed significant differences according to individual absorptive capacity. The implications of this study are summarized as follows. First, for innovative organizational management in SMEs where human resources are more important than physical resources, SMEs need to provide a creative working environment and motivate members to derive positive innovative behavior. Second, innovation behavior differs depending on personal absorptive capacity, and innovation behavior becomes the subject of corporate growth, indicating that various interests and support are needed to increase personal absorptive capacity along with positive motivation for members.

• Journal of the Korean Institute of Gas
• /
• v.27 no.3
• /
• pp.98-107
• /
• 2023

This study presents a well spacing design for coalbed methane(CBM) reservoirs using the experimental results of methane gas adsorption measurement of coal samples obtained from North Kalimantan Island, Indonesia. The gas productivity analysis shows that the cumulative gas production increases as the Langmuir volume increases. This indicates that the maximum gas adsorption directly affects the gas production. In addition, the maximum gas production increases with the increase of reservoir permeability, and the dewatering period is shortened. In particular, the cumulative gas production increases as the production influence area increases. However, when comparing productivity per unit well, the maximum cumulative gas production is found between 2,000 ft of depth and 80-160 acres of the influence area. When reservoir depth and production influence area are considered simultaneously, the results of the appropriate well depth and spacing calculations show that gas productivity is highest between 600-2,000 ft. In this case, it is appropriate to design well spacing in the range of 80-160 acres. Therefore, well spacing design considering coalbed depth in undeveloped CBM reservoirs can be accomplished using gas sorption test results from coal samples.

• Journal of Korean Library and Information Science Society
• /
• v.54 no.4
• /
• pp.229-254
• /
• 2023

The university library's service strategy needs to be established based on users, who are actual service consumers, including an outlook on changes in the social environment. Accordingly, in this study, college and graduate students, instructors, and researchers who are university library users were identified to understand users' perceptions of the university library functions and services currently provided, and the demand for services that need to be improved or developed. Data was collected through an online survey, with 1,216 responses from the student group and 433 responses from the researcher group. The survey results were organized by each group, and implications were drawn from common results. First, it was found that both groups had a continuous demand for strengthening the collection and access to information resources. Second, there was a need to expand information provision services, such as strengthening the sharing of information resources through cooperation with other organizations and wishing to use overseas academic materials in various ways. Third, although the library was recognized as an important institution, it was found that satisfactory use was not achieved due to lack of publicity. Fourth, it was found that university libraries recognize that they must provide open services to everyone without discrimination. The results of this study can be used as basic data when establishing strategies to develop and improve university library services optimized for users.

• Environmental and Resource Economics Review
• /
• v.33 no.3
• /
• pp.203-239
• /
• 2024

The introduction of a regional differential electricity rate system is being discussed, and the LMP (Locational Marginal Price) method is mentioned as a promising alternative. Under this background, this study analyzed a mathematical model and suggests that the LMP method produces results that maximize social welfare. The analysis was conducted separately for long-term decision-making where transmission capacity can be expanded, and for short-term decision-making in which transmission capacity is given. The analysis for short-term decision-making was conducted for peak load situations where capacity is insufficient and for non-load situations with spare capacity. The results of the analysis suggested that the price to maximize social welfare is equal to the marginal power generation cost by region, and the difference in marginal cost by region reflects the value lost due to transmission loss and compensation for transmission network investment. In addition, if the transmission capacity is less than the optimal capacity, the compensation for transmission network investment exceeds the incremental cost, providing an incentive to invest in the transmission network. If the transmission capacity exceeds the optimal capacity, the compensation for transmission network investment becomes lower than incremental cost or zero and the investment is not recovered, suppressing the investment in transmission networks. The results are the same as the LMP method suggests, and this means that this method maximizes social welfare and provides an optimal transmission network investment signal. The above analysis results contribute to understanding the characteristics of LMP. In addition, this study discussed what changes are needed in the electricity market when introducing the LMP concept.

• Economic and Environmental Geology
• /
• v.46 no.4
• /
• pp.313-327
• /
• 2013

In the study, three-dimensional geostatistical simulations on McMurray Formation which is the largest oil sand reservoir in Athabasca area, Canada were performed, and the optimal site for steam assisted gravity drainage (SAGD) was selected based on the predictions. In the selection, the factors related to the vertical extendibility of steam chamber were considered as the criteria for an optimal site. For the predictions, 110 borehole data acquired from the study area were analyzed in the Markovian transition probability (TP) framework and three-dimensional distributions of the composing media were predicted stochastically through an existing TP based geostatistical model. The potential of a specific medium at a position within the prediction domain was estimated from the ensemble probability based on the multiple realizations. From the ensemble map, the cumulative thickness of the permeable media (i.e. Breccia and Sand) was analyzed and the locations with the highest potential for SAGD applications were delineated. As a supportive criterion for an optimal SAGD site, mean vertical extension of a unit permeable media was also delineated through transition rate based computations. The mean vertical extension of a permeable media show rough agreement with the cumulative thickness in their general distribution. However, the distributions show distinctive disagreement at a few locations where the cumulative thickness was higher due to highly alternating juxtaposition of the permeable and the less permeable media. This observation implies that the cumulative thickness alone may not be a sufficient criterion for an optimal SAGD site and the mean vertical extension of the permeable media needs to be jointly considered for the sound selections.

• Resources Recycling
• /
• v.26 no.6
• /
• pp.29-37
• /
• 2017

Nuclear fuel cladding tube is fabricated by pilgering and annealing process. In order to remove impurity and oxygen layer on the surface, pickling process is carried out. When Zirconium(Zr) is dissolved and saturated in acid solution during the pickling process, all the waste acid including Zr is disposed. Therefore, $BaF_2$ is added into the waste acid to extract Zr and $Ba_2ZrF_8$ is subsequently formed. To recycle Zr by electrowinning process, $Ba_2ZrF_8$ is used as electrolyte, but it has high melting point ($1053^{\circ}C$). $ZrF_4$ should be added into $Ba_2ZrF_8$ to decrease the melting point. In this paper, it was investigated that $Ba_2ZrF_8$ was separated to $BaF_2$ and $ZrF_4$ by vacuum distillation. Firstly, $BaF_2$ with different particle size ($1{\mu}m$, $35{\mu}m$, $110{\mu}m$) was added into the waste acid and the respective precipitation property was estimated. $BaF_2$ obtained by vacuum distillation was shattered by ball-milling with different time. The precipitation efficiency was compared with $1{\mu}m$ of ${BaF_2}^{\prime}s$ one, which was not used as precipitation agent.

• Korean Journal of Plant Resources
• /
• v.32 no.2
• /
• pp.116-123
• /
• 2019

Angelica gigas Nakai (AGN) is a traditional medicinal herb especially in Korea. It contains pyranocoumarins, which are major active components including decursin (D) and decursinol angelate (DA). This study was carried out to determine the change in active component content and antioxidant activity depending on the root diameter of AGN. Several processing steps are involved to use AGN roots as medicine. The dried AGN roots are divided into body (B), thick root (TkR), medium root (MR) and thin root (TnR) according to their diameter before cutting into medicine. The recovery rates of each root parts per 100 kg were measured as $32.3{\pm}2.5$, $9.0{\pm}1.0$, $39.3{\pm}2.1$ and $15.0{\pm}1.0%$, respectively and the mean diameters were measured as $51.95{\pm}4.55$, $7.05{\pm}0.89$, $2.88{\pm}0.49$ and $1.57{\pm}0.32mm$. Two index components, D and DA, were analyzed. The change of both D and DA content showed a similar tendency. Both D and DA content were increased as the root diameter decreased (higher in TnR). In addition, antioxidant activity was higher in B and TnR, and lower in TkR and MR than control. This study showed that the thinner the root diameter, the higher the D and DA content in AGN roots and that TnR has excellent antioxidant activity compared to other root parts, suggesting that the thinner root part of AGN could be used as a potential material.

• Resources Recycling
• /
• v.31 no.4
• /
• pp.56-65
• /
• 2022

Copper is one of the non-ferrous metals used in the electrical/electronic manufacturing industries due to its superior properties particularly the high conductivity and less resistivity. The effluent generated from the surface finishing process of these industries contains higher copper content which gets discharged in to water bodies directly or indirectly. This causes severe environmental pollution and also results in loss of an important valuable metal. To overcome this issue, continuous R & D activities are going on across the globe in adsorption area with the purpose of finding an efficient, low cost and ecofriendly adsorbent. In view of the above, present investigation was made to compare the performance of a plant root (Datura root powder) as a bio-adsorbent to that of the synthetic one (Tulsion T-42) for copper adsorption from such effluent. Experiments were carried out in batch studies to optimize parameters such as adsorbent dose, contact time, pH, feed concentration, etc. Results of the batch experiments indicate that 0.2 g of Datura root powder and 0.1 g of Tulsion T-42 showed 95% copper adsorption from an initial feed/solution of 100 ppm Cu at pH 4 in contact time of 15 and 30 min, respectively. Adsorption data for both the adsorbents were fitted well to the Freundlich isotherm. Experimental results were also validated with the kinetic model, which showed that the adsorption of copper followed pseudo-second order rate expression for the both adsorbents. Overall result demonstrates that the bio-adsorbent tested has a potential applicability for metal recovery from the waste solutions/effluents of metal finishing units. In view of the requirements of commercial viability and minimal environmental damage there from, Datura root powder being an effective material for metal uptake, may prove to be a feasible adsorbent for copper recovery after the necessary scale-up studies.