• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.6
• /
• pp.772-779
• /
• 2019

The subsea pipeline has received considerable attention as a high-value-added industry linked to the energy and steel industries including natural resource development. The design and installation of the subsea pipeline require a variety of key technologies to carry out the project. In particular, a thorough pre-verification process through pre-commissioning is essential for the safe operation of the subsea pipeline. The hydrotesting stage in the pre-commissioning process of the subsea pipeline is known to be affected significantly by the ambient temperature change; however, there is a little study based on the theoretical and numerical approach. In this study, the method of predicting the internal temperature change using the transient heat transfer method for the stage of hydrotesting during the pre-commissioning process of the subsea pipeline and the prediction method of the pressure variation in the pipeline using it were proposed. The predicted results were compared with field test results and its effectiveness was verified. The proposed analysis procedure is expected to contribute to the productivity improvement of the subsea pipeline installation project by enabling the prediction of pressure variation through pipeline heat transfer simulation from the initial design stage of the subsea pipeline installation project.

• Journal of Digital Contents Society
• /
• v.19 no.3
• /
• pp.505-512
• /
• 2018

Internet demand has increased rapidly, and Internet Protocol Version 4, the main Internet protocol, can not cope with various types of network demand in the future. Therefore, it is urgent to spread IPv6-based stable network to solve the shortage of Internet address resources. Due to the proliferation of IoT and the increase in mobile devices, efficient and optimal IPv6 routing design is indispensable. In this paper, we have studied about characteristics of IPv6, address system of IPv6, structure analysis and efficient routing technology among IPv6 terminals. Furthermore, experimental results on routing packet analysis and convergence time are presented in network - based IPv6 routing implementation environment. In addition, we show the results of the experiment analysis by dividing the implementation of IPv6 routing, operation test, and fail over performance into three kinds of routing protocol methods. As a result, this study can be applied to the introduction of IPv6 system, test bed environment construction, and network design.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.11
• /
• pp.91-99
• /
• 2010

Recently, recognizing user resource for personalized service has been needed in digital content service fields. Especially, to analyze user taste, recommend music and service music related information need recognition of user music file in case of online music service. Music related information service is offered through recognizing user music based on tag information. Recognition error has grown by weak points like changing and removing of tag information. Techniques of content based user music recognition with music signal itself are researched for solving upper problems. In this paper, we propose user music recognition on the internet by extracted feature from music signal. Features are extracted after suitable preprocessing for structure of content based user music recognition. Recognizing on music server consist of feature form are progressed with extracted feature. Through this, user music can be recognized independently of tag data. 600 music was collected and converted to each 5 music qualities for proving of proposed recognition. Converted 3000 experiment music on this method is used for recognition experiment on music server including 300,000 music. Average of recognition ratio was 85%. Weak points of tag based music recognition were overcome through proposed content based music recognition. Recognition performance of proposed method show a possibility that can be adapt to online music service in practice.

• Journal of Korean Society of Transportation
• /
• v.20 no.4
• /
• pp.151-162
• /
• 2002

The object of this study is to develop an operating time prediction model for expressways using toll collection data. A Prediction model based on modular neural network model was developed and tested using real data. Two toll collection system(TCS) data set. Seoul-Suwon section for short range and Seoul-Daejeon section for long range, in Kyongbu expressway line were collected and analyzed. A time series analysis on TCS data indicated that operating times on both ranges are in reasonable prediction ranges. It was also found that prediction for the long section was more complex than that for the short section. However, a long term prediction for the short section turned out to be more difficult than that for the long section because of the higher sensitivity to initial condition. An application of the suggested model produced accurate prediction time. The features of suggested prediction model are in the requirement of minimum (3) input layers and in the ability of stable operating time prediction.

• 대한공업교육학회지
• /
• v.34 no.1
• /
• pp.19-43
• /
• 2009

An ideology what a modern society seeks is lifelong employment through lifelong learning. The single word which draws the attainment is lifelong vocational competency development. This study is designed for exploring its possibility and limit of a redesign of it, and tries to propose efficiently a redesign idea of a vocational educational path. To this end, it was analyzed by a subject for a national human resource foundation plan and a lifelong bocational competency development foundation plan. In addition to that, it was covered a structure and content analysis of main laws and regulations which are a base of policy making. An educational path could be divided into an area of formal education system, an area of workplace for labors, and an area of lifelong vocational competency development. And the insights were drawn by pulling apart an operational situation of main organizations and a recurrent process of the educational path. The redesign plan of a vocational education path we did analyze to activate lifelong vocational competency development system is deduced as following. Firstly, it should be re-organized with a direction towards an effective manpower training to be linked with skills and demands required by an industry. Secondly, it should be generalized for a model of recurrence between work and learning and its alternation for lifelong vocational competency development. Thirdly, it should create a cluster in the region for lifelong vocational competency development so that it is to form an efficient network to have a division of labor and its liaison with cooperative relationship.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.21 no.1
• /
• pp.96-105
• /
• 2018

The V-world, Spatial information open platform map service, provides various national spatial data. Recently, with the development of IT technology, demand for 3D geospatial data that can be merged with new industries such as Internet of Things(IoT) and autonomous vehicles is increasing. Because 3D geospatial data is large and complex, many computer resources are used to provide map services. Most of the 3D map services, such as Vworld, are constructed binary data in consideration of performance. However, this type of data is incompatible because it is difficult to use in other services if there is no precise understanding of the specification. In this paper, we propose a data serialization method to improve the compatibility of new Vworld 3D format which is constructed in binary form. The performance of binary data and serialized binary data is tested and compared. As a result, it is expected that the data using the serialization technique will be similar to the binary data and contribute to improve compatibility.

• Cartoon and Animation Studies
• /
• s.48
• /
• pp.1-22
• /
• 2017

Independent short animation was the expression method for young animation creators through creative and progressive representation. Since the birth of animation, independent short animation has become a driving force for qualitative development and diversification of animation. This has brought many works to the world that emphasize experimentation and challenges in the history of animation and in countries that have the rich animation resources such as France, Japan, and Canada, they recognize its importance and supports young creators in order to maintain the value of it. However, Korean animations are evaluated the quality of works by the popularity of the children, moreover, companies that focus on developing and selling products, including toys, rather than animation works themselves and public awareness that accepts them are formed throughout the Korean animation industry. Because of these points, Korean animation creators can not express the creative vision for the future and philosophical awareness of the problem and they are trapped in commercial animation markets. In order to re-leap and expand the Korean animation industry, which has reached the saturation level with infant animation, it is necessary to reestablish the value of independent short animations with challenging and experimental characteristics and requires the creative environment and support system for the diversity of Korean animation industries, including the achieving commercial goals through good planning, story development and technological innovation. For this purpose, this paper analyzes the current state of production, screening, distribution, and government support of independent short animation in Korea, and explores the structural problems and solutions.

• Journal of Plant Biotechnology
• /
• v.43 no.3
• /
• pp.272-280
• /
• 2016

Chrysanthemum is one of the top floriculture species with ornamental and medicinal value. Although chrysanthemum breeding program has contributed to the development of various cultivars so far, it needs to be advanced from the traditional phenotype-based selection to marker-assisted selection (molecular breeding) as shown in major cereal and vegetable crops. Molecular breeding relies on trait-linked molecular markers identified from genetic, molecular, and genomic studies. However, these studies in chrysanthemum are significantly hampered by the reproductive, genetic, and genomic properties of chrysanthemum such as self-incompatibility, inbreeding depression, allohexaploid, heterozygosity, and gigantic genome size. Nevertheless, several genetic studies have constructed genetic linkage maps and identified molecular markers linked to important traits of flower, leaf, and plant architecture. With progress in sequencing technology, chrysanthemum transcriptome has been sequenced to construct reference gene set and identify genes responsible for developments or induced by biotic or abiotic stresses. Recently, a genome sequencing project has been launched on a diploid wild Chrysanthemum species. The massive sequencing information would serve as fundamental resources for molecular breeding of chrysanthemum. In this review, we summarized the current status of molecular genetics and genomics in chrysanthemum and briefly discussed future prospects.

• Journal of Internet Computing and Services
• /
• v.10 no.4
• /
• pp.87-103
• /
• 2009

Grid computing is an expanded technology of distributed computing technology to use low-cost and high-performance computing power in various fields. Although the purpose of Grid computing focuses on large-scale resource sharing, innovative applications, and in some case, high-performance orientation, it has been used as conventional distributed computing environment like clustered computer until now because Grid middleware does not have common sharable information system. In order to use Grid computing environment efficiently which consists of various Grid middlewares, it is necessary to have application-independent information system which can share information description and services, and expand them easily. Thus, in this paper, we propose a semantic information system framework based on web services and ontology for Grid computing environment, called WebSIS. It makes application and middleware developer easy to build sharable and extensible information system which is easy to share information description and can provide ontology based platform-independent information services. We present efficient ontology based information system architecture through WebSIS. Discovering appropriate resource for task execution on Grid needs more high-level information processing because Grid computing environment is more complex than other traditional distributed computing environments and has various considerations which are needed for Grid task execution. Thus, we design and implement resource information system and services by using WebSIS which enables high-level information processing by ontology reasoning and semantic-matching, for automation of task execution on Grid.

• Journal of the Korea Society for Simulation
• /
• v.17 no.1
• /
• pp.33-42
• /
• 2008

In general, simulation is to predict or evaluate some systems that are hard to be executed in real world, and so usually the target systems to be modeled are large and complex. Trying to observe the dynamics of the systems results in similar level of animation complexity, the model and animation has the same complexity as the system. Trying to display all the graphic objects representing the dynamics of the models being simulated, however, causes the distraction of focus, which results in solving the above listed problems difficult. The redundant graphic objects also increase the computer computation overhead. To solve the problem, a research about a hierarchical animation environment has been proposed a few years ago. In the research, the users can have better focus on the dynamics of system components by selectively choosing the hierarchical level and components within a level of the hierarchically structured model. However, the research has not a modeling methodology for modelers to describe systematically animation part corresponding to dynamics of simulation in a model. This research has defined the modeling methodology of DESHA and defined DESHA-C++, improving the previous research output, as an execution environment of DESHA models. In addition, to use hierarchical animation environment in various problems, this research proposed and developed the distributed simulation modeling environment that connects DESHA environment and HLA.