• Journal of the Korean Magnetics Society
• /
• v.4 no.2
• /
• pp.168-172
• /
• 1994

This paper reports a method measuring magnetostriction, Young's moduli of a substrate and film and ${\Delta}\;E$-effect with one apparatus. A substrate deposited with a thin magnetic film is parallely cantilevered paraIled to a metal plate electrode, forming a capacitive cell. The cantilever deflects due to own weight, applied electric and magnetic filed. The smaIl change of the capacitance caused by this deflection is measured by a sensitive capaci-tance bridge. Young's modulus, magnetostriction and ${\Delta}\;E$ effect can be calculated by theoretical analysis with the weight, applied field and deflection data.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.544-548
• /
• 2003

The objective of this investigation is to develop an efficient method to generate and measure torsional waves in non-ferromagnetic waveguides by using magnetostrictive transducers. In existing methods using a nickel strip that is attached circumferentially to the test specimen such as aluminum pipes, large current input to the magnetostrictive transducer often generates undesired wave modes in addition to desired torsional wave. However, we propose an improved method to generate the torsional waves without being accompanied by other undesirable wave modes regardless of the input current magnitude. The specific transducer configuration and its performance will be presented in the present investigation.

• Journal of the Korean Magnetics Society
• /
• v.3 no.2
• /
• pp.135-138
• /
• 1993

Saturation rnagnetostriction and rnagnetoelastic properties of amorphous $Fe_{82}B_{18-x}Al_{x}$ and $Fe_{80}B_{20-x}Al_{x}$ alloys have been studied. Saturation magnetostriction of the alloys has increased according to the increase of AI content. The amorphous $Fe_{82}B_{14}Al_{4}$ alloy shows the highest saturation magnetostriction of 45 ppm among the alloy systems. The ratio of maximum magnetic induction change to tensile stress of this alloy is about $0.026\;T.mm^{2}/N$, and it is considered to be applicable for a high resolution mechanical sensor.

• Journal of Sensor Science and Technology
• /
• v.12 no.2
• /
• pp.95-101
• /
• 2003

Ultrasonic transmitter used for scale prevention in boiler or heat exchanger is composed of the magnetostrictive material which transforms electric energy into ultrasonic wave and the horn which amplifies generated ultrasonic wave and transfers it into medium loaded. In this paper, we have performed the shape design for magnetostrictive material and analyzed a few type of horns which amplify generated ultrasonic wave and found each solution theoretically. Final length of the horn has been determined by measuring the sound pressure in medium between theoretical value and experience data. At last we have given the results of our study for the effects of ultrasonic wave irradiated by manufactured ultrasonic transmitter on preventing scale deposition on test pipe under the similar condition to boiler.

• Proceedings of the Korean Magnestics Society Conference
• /
• 1997.05a
• /
• pp.94-95
• /
• 1997

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1989.06a
• /
• pp.49-51
• /
• 1989

The effect of Mo elenent and annealing condition on the magnetic properties were investigated in Fe$_{80}$B$_{12}$Si$_{8}$ amorphous alloy. With increasing Mo contents, soft magnetic properties were improved by decreasing coercive force and increasing maximum permeability. These improvements were attributed to the decreasing of magnetostriction by Mo addition. The annealing treatment also improved the soft magnetic properties of (Fe$_{1-x}$ Mo$_{x}$)$_{80}$ B$_{12}$ Si$_{8}$ amorphous alloys. It could be thought that these improvements were ascribed to the relaxation of internal stress.nal stress.ess.

• Journal of the Korean institute of surface engineering
• /
• v.31 no.4
• /
• pp.199-208
• /
• 1998

자벽고착 개념에 기초를 둔 새로운 조화센서는 다음과 같이 설명되어진다. 2단계 열처리된 Co계 비전질 percursor은 특이한 signal을 유발시키는데 이는 자속의 단계적인 변화를 나타내는 hystresisloop에 기인한다. 자장하에서의 1단계 열처리는 M-H loop에서 일축유도 자기이방성을 발생시킨다. 2단계 무자장하의 열처리는 고착된 자벽의 stepped hystresis의 특성을 나타내는데 이로인해 유용한 marker로서의 특징을 가지게 된다. 열처리동안 비정질재료의 표면과 내부에서 상당량의 산화와 결정화 과정을 거치는 것이 관찰되었다. 이오인한 표면 자벽 고착 모델의 제안은 자벽의 고착이 비정질부분과 semi-hard Co 층간의 접합면에서 가장 효과적으로 얻어지다는 것으로써 확신되어진다. 또한 자벽 고착 자장과 결정화된 Co층의 두께간의 상당한 연관성도 관찰되었다.

• Korean Journal of Materials Research
• /
• v.10 no.10
• /
• pp.709-714
• /
• 2000

SAW 소자에 응용 가능한 자성박막재의 개발을 목적으로 RF 스퍼터링법으로 증착한 (Fe(sub)0.6Co(sub)0.4)(sub)89Zr(sub)11/Fe(sub)1-xCo(sub)x)Zr(sub)11(x=0, 0.6, 0.9)<원문잠조> 비정질 다층박막의 자기특성을 조사하였다. 수직자기장중열처리를 행하였을 때 상온에서 비자성 Fe(sub)89Zr(sub)11 층의 삽입에서만 다층박막화의 효과가 나타났다. 일 예로 (Fe(sub)0.6Co(sub)0.4)(sub)89Zr(sub)11(30${\AA}$)/Fe(sub)89-Zr(sub)11(40${\AA}$)<원문참조> 박막시편에 1kHz, 50 mOe의 여기자기장으로 평가된 최대 미분투자율${\mu}$(sub)d.max는 단층막의 750에서 1650으로 2배 이상 증가, 구동 바이어스자기장 Hw는 20 Oe에서 6Oe로 3배 이하로 감소하는 양호한 특성이 얻어졌다. 그러나 다른 중용 특성인 자왜는 34% 정도 감소하는 것으로 추정되었다.

• Korean Journal of Optics and Photonics
• /
• v.2 no.3
• /
• pp.139-148
• /
• 1991

A fiber-optic magnetic sensor system for the detection of small ac magnetic field(200Hz-2 kHz) was constructed. Magnetic field sensing part was fabricated by bonding a section of optical fiber to amorphous metallic glass(2605SC) having large magnetostriction effect. And with the directional coupler, all fiber type Mach-Zehnder interferometer was constructed to measure the variation of the external magnetic field by translating it into the optical phase shift in the interferometer. The signal fading problem of the interferometer, which is due to random phase drifts originated from the environment, i.e., temperature fluctuation, vibrations, etc., was elliminated by feedback phase compensation. This allows the sensitivity to be maintained at the maximum by keeping the interferometer in quadrature phase condition. The frequency response of metallic glass was found to be nearly flat in the range of 90 Hz-2 kHz and dc bias field for the maximum ac response was 3.5 Oe. The interferometer output showed good linearity over the range $\pm$0.5 Oe. For 1 kHz ac magnetic field the scale factor S and the minimum detectable magnetic field were measured to be 8.0 rad/Oe and $3X10^{-6} Oe/\sqrt{Hz}$at 1 Hz detection bandwidth respectively.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.4
• /
• pp.333-341
• /
• 2022

Magnetoelectric (ME) composites are comprised of magnetostrictive and piezoelectric phases. Lots of theoretical and experimental works have been done on ME composites in the last couple of decades. The output performance of ME composites has been enhanced by optimizing the constituent phases, interface layer, dimensions of the ME composites, different operating modes, etc. However, the detailed information about the characterization of ME coupling in ME composites is not provided yet. Therefore, in this tutorial paper, we are giving an insight into the details of measurements of ME voltage coefficient of ME composites both at off-resonance and resonance conditions. A symmetric type Gelfenol/PMN-PZT/Gelfenol ME composites were fabricated by sandwiching (011) 32-mode PMN-PZT single crystal between two Galfenol plates by epoxy bonding are used for the example of ME coupling measurement. The details about the experimental setup used for the measurement of ME voltage coefficient are provided. Furthermore, a step-by-step measurement of ME voltage coefficient using computerized program is demonstrated. We believe the present experimental measurement details can help readers to understand the concept of ME coupling and its analysis.