• Proceedings of the Korea Information Processing Society Conference
• /
• 2008.11a
• /
• pp.763-765
• /
• 2008

최근 물류가 취급되는 발착장에서는 업무효율을 높이기 위해 RFID 시스템을 구축하여 물류의 발착업무를 자동으로 수행하는 사례가 늘고 있다. 본 고는 우편집중국 발착장에 900MHz 대역의 RFID 시스템을 구축하기에 앞서, 시스템을 구성하는 주요 장비의 기능 및 성능을 사전에 검증하고 대상장비의 신뢰성을 제고하고 시간과 노력 및 비용을 줄이기 위해 BMT 를 실시한 내용을 기술한 것이다. BMT 의 주요 항목으로는, RFID 고정형 리더의 전파간섭시험, 주파수 호핑시험, 롤파렛 인식시험 등이었으며, 해당 장비의 기능 및 성능을 기술적으로 검증할 수 있었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.98.2-98.2
• /
• 2011

지구 온난화의 원인이 되는 이산화탄소를 저감하며 유해한 배기가스를 배출하지 않는 수소연료전지자동차(FCV)에 대한 관심이 높아지고 있다. 한국가스안전공사에서 현재 구축하고 있는 평가장비는 이러한 수소연료전지자동차용으로 사용되는 고압용기의 수압반복시험 및 밸브류로 구성된 고압수소저장시스템의 단품 및 시스템 평가를 통한 안전신뢰성 검증을 목적으로 하고 있다. 현재 수소연료전지자동차는 차량이나 부품의 시험 방법에 대한 통일된 기준/표준/시험법이 아직 완전하게 정비되어 있지 않고, 시장에서의 도입 제도, 기준 등이 만들어지고 있는 현실이다. 또한 연료로 수소를 사용하는 도입단계에 있기 때문에, 수소용기가 반복압력변동에 따라 어떤 거동을 나타내는지에 대한 실험관련 연구가 미진한 상태이다. 따라서 수소연료전지자동차용 고압수소저장시스템에 대한 내구성, 안전성 확보를 위하여 수소연료전지자동차에서 중요한 부품인 용기에 대한 반복피로시험이 필요하다. 특히 복합재 용기 분야에서 Type3용기에 대한 높은 안전성과 내구성이 보고되고 있지만 실질적으로 얼마나 다른 용기에 비해 높은 성능을 가지고 있는지 국내에서는 체계적으로 검증된바 없다. 따라서 구축된 수압반복 장비를 이용하여 Type3 용기에 대한 수압반복시험을 실시하였으며, 이를 통해 수소용기의 거동을 확인하고자 한다.

• KIISE Transactions on Computing Practices
• /
• v.24 no.1
• /
• pp.33-39
• /
• 2018

For the integration test in the current field of defense simulation, each actual equipment and simulator's logging information is automated. Although the event of the integrated test system is written in the test log, it is not automated, and relies on the operator's handwriting or file creation, resulting in ineffective aspects such as low-quality record content and repetition of the same content. In this study, we propose the automatic test report recording program that solves these problems. Automatic test report recording program uses framework-based technology to receive information from the test control computer and user to record a log of the test log. Automatic test report recording program allows the user to record the repeated test content in a stable manner. Additionally, even if the number of test operators is limited, the efficiency is improved so that we can fucus on the integration test.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.4
• /
• pp.316-323
• /
• 2016

A UAV(Unmanned Aerial Vehicle) flies along pre-programed navigation points(in-flight, take-off, or landing) automatically without pilot input. Even though UAVs fly differently from general piloted aircraft as the pilot controls the aircraft from a ground station through means of a data-link system. Occasionally, the data-link connection can be lost for any number of reasons, in which case, the FLCC(Flight control Computer) must automatically switch to autopilot to continue flying. Hence, the FLCC is a flight-critical component that must be throughly tested and validated. This paper discusses the development of a HILS(Hardware in the Loop Simulation) test environment designed to simulate real flight conditions to verify the FLCC satisfies flying quality requirements and maintains robustness despite any potential malfunctions or emergency situations.

• Journal of Korea Society of Industrial Information Systems
• /
• v.19 no.3
• /
• pp.1-7
• /
• 2014

This paper describes the implementation of high speed comparator for the ATE (automatic test equipment) system. The comparator block is composed of continuous comparator, differential difference amplifier(DDA) and output stage. For the wide input dynamic range of 0V to 5V, and for the high speed operation (1~800MHz), high speed rail-to-rail amplifier is used in the first stage. And hysteresis circuits, pre-amp and latch are followed for high speed operation. To measure the difference of output signals between the two devices under test (DUTs), a DDA is applied because it can detect the differences of both common signals and differential signals. This comparator chip was implemented with $0.18{\mu}m$ BCDMOS process and can compare the signal difference of 5mV up to the frequency range of 800 MHz. The chip area of the comparator is $620{\mu}m{\times}830{\mu}m$.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.9
• /
• pp.5-12
• /
• 2005

SPT hammer energy and its delivery are hon to influence the N value. The SPT hammer energy is classified into theoretical energy, velocity energy, rod energy and dynamic efficiency. In this study, the rod energy and the velocity energy are measured directly by PDA and Digital Line-Scan Camera which are most widely used type of SPT apparatus in Korea. The Dynamic efficiency is calculated through measured data. As the results of this study, the averages of rod energy ratio of donut, safety and automatic hammer are measured at 49.57, 61.60, and at $87.04\%$ by FV method. The averages of hammer velocity of donut, safety and automatic hammer are measured at $3.177{\pm}0.872$, $3.385{\pm}0.681$, and at $3.651{\pm}0.550$ m/s by Digital Line-Scan Camera, with the dynamic efficiencies at 0.732, 0.801, and 0.973 respectively.

• Journal of Digital Convergence
• /
• v.14 no.5
• /
• pp.317-323
• /
• 2016

This paper suggests a system that can detect malfunctions of the temperature testing equipment, and then notify this information to surroundings using arduino. Precision electronics need a test under extremely high/low temperature using temperature called a chamber. If this chamber have a malfunction situation, the precision electronics under test is damaged and scrapped. Especially when the temperature test is automatically conducted at night with no representative, this system monitors the actual temperature of the tested product in real-time by attaching a temperature sensor to the inside of the test equipment. In case when it is out of the temperature range set up by the tester, the damage to high-priced products can be prevented in the condition of extremely high/low temperature, by turning off the power of the temperature testing equipment, and also notifying this information to the worker at night-time. Regardless of the equipment manufacturers, proposed system in this paper can be applied to all kind of temperature testing equipments, and it can be also produced for low cost.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.6
• /
• pp.2472-2478
• /
• 2012

This research is aiming to develop Semiconductor equipment maintenance certification course to train qualified maintenance experts more effectively requested in related semiconductor industry. In the course of research, we adopted diverse research technique such as interview, on-spot investigation, documentary references to analyze current status of related training facilities, and forecast the population of test applicants. We analyzed similar certification course(Craftsman SMT, Industrial Engineer SMT, Craftsman Mechatronics, Industrial Enginee Mechatronics, et) as reference to set up job objectives and curriculum of semiconductor equipment maintenance certification. We conducted survey on expectations on newly created certificate, presented evaluation standard and objective of test, and preliminary writing test and demonstration test. Based on the result of various research, we were able to present training program for semiconductor equipment maintenance certification and set the assessment standard of qualification exam.

• Journal of Aerospace System Engineering
• /
• v.13 no.5
• /
• pp.87-93
• /
• 2019

This study suggests the development of the ALE (Automatic Link Establishment) system for the long-range communication with a helicopter at the lands or marines by HF (High Frequency) radios. In the condition of LOS or more than 35 NM, the communication success rate is significantly lowered when the frequency is manually selected because of the reduced transmission power and various strong RF environment noise signals. In this paper, we make an effort to overcome the difficulties of choosing the optimal frequency when the operating frequency selection is manually operated in long-distance communication or LOS uncertain environment. The ALE system is designed based on the frequency analysis propagation software and is verified that the communication success rate is increased by applying the proposed system. The ALE system was applied to the helicopter system and the ground/flight test was conducted. As a result, the superiority and efficiency of the proposed system were verified.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2000.04a
• /
• pp.123-124
• /
• 2000

오존($O_3$)은 이산화질소, 일산화탄소, 휘발성유기화합물 둥을 포함하는 다양한 물질과 광화학반응에 의하여 생성되는 2차적인 오염물질로 사람과 식물에 영향을 미치고 있는 중요한 오염물질로 알려지고 있으며, 국내에서는 이와 관련하여 오존예보제, 경보제 둥을 운영하여 오존에 의한 피해 영향을 줄이고자 노력하고 있다. 현재 오존을 측정할 수 있는 방법은 환경오염공정시험방법과 정부에서 운영하고 있는 대기오염 자동측정망의 오존 측정방법인 자외선광도법(Ultra Violate Photometric Method)으로 구분되어 지고 있으나, 자동측정장비는 매우 고가의 장비이며, 관리를 위하여 전문적인 지식이 요구되고 있고, 측정소의 개수가 매우 부족한 실정이기 때문에 대기중 오존농도의 지역적인 자료와, 실내공기 측정, 그리고 공간적인 분포 해석을 위해서는 다른 측정방법이 요구된다고 하겠다. (중략)