• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 추계학술대회
• /
• pp.670-671
• /
• 2016

자동화 수동변속기는 수동변속기에 액츄에이터를 설치하여 자동으로 수동변속기를 변속할 수 있게 한 변속기로써, 자동화 수동변속기의 조작 편의성과 수동변속기 수준의 높은 연비로 인해 대형 상용차에 많이 적용되고 있다. 대형 상용차에 적용되는 12단 자동화 수동변속기는 다른 자동 변속기와 마찬가지로 자동변속로직과 변속맵에 의해 변속시점을 결정하지만 기존의 방식으로는 변속충격, 클러치 마모, 연비저하 등의 문제점이 발생할 수 있다. 본 논문은 12단 자동화 수동변속기에 알맞은 변속로직 및 변속맵의 설계와 성능확인시험에 대한 내용을 다루고 있다.

• 한국자동차공학회논문집
• /
• 제7권7호
• /
• pp.136-148
• /
• 1999

Detailed mathematical models of hybrid drivertrain components are presented and numerical simulations are carried out to analyze the shift characteristics and to improve the driving comfortability when the hybrid drivetrain is applied at the vehicle . Theoretical results are compared with experimental ones from the dynamometer as same condition in order to prove the appropriateness of modeling . Adding the vehicle body modeling, included in the suspension and the engine mount, it is possible to predict the dynamic behavior and shift characteristics more actually when shifts are occurred by automated manual transmission(AMT). these additional results are also compared with the same simulation ones of internal combustion engined vehicle equipped conventional manual transmission. Hence, it can be expected that the hybrid vehicle with AMT has a good shift quality.

• 한국자동차공학회논문집
• /
• 제9권5호
• /
• pp.105-114
• /
• 2001

In this study, a shift control algorithm far improving the shift quality of a parallel hybrid drivetrain with an automated manual transmission (AM) is proposed. The general AMT requires the sophisticated control of clutch in the clutch engagement to improve its shift characteristics, and that is generally known to be difficult. But in this hybrid drivetrain, we can control the speeds of clutch plates by engine and motor control, and it provides the easier clutch control in shift process than general AMT. Additionally, it permits the much-reduced shift shock. The motor control during the shift period is also to achieve reduced velocity drop of the vehicle in comparison with that of a general AMT. Furthermore various dynamometer-based experiments are carried out to prove the validity of the proposed shift control algorithm.

• 한국정밀공학회지
• /
• 제24권10호
• /
• pp.75-82
• /
• 2007

The AMT(Automated Manual Transmission) has been developed by utilizing the auto clutch system and the automatic shift mechanism, to automate the clutch operation and shift operation of the existing MT(Manual Transmission). The use of hydraulic actuator for each actuator of the clutch and gear has realized a reduction of fuel consumption and exhaust emission. In this paper, we develop a simulator for the transmission control system of the AMT using AMESim. The developed simulator can be applied to design the hydraulic select actuator system of an AMT.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.325-329
• /
• 1996

This study is one of the prestudy for te design of an automated manual transmission. For understanding dynamic characteristics of the clutch that is one of the most important elements. the mathematical modeling of the core element of a manual transmission is fulfilled and using this modeling the simulation program is developed. To verify this analysis, the A.M.T dynamomenter is constructed.

• 한국정밀공학회지
• /
• 제23권3호
• /
• pp.86-93
• /
• 2006

This study is concerned with the investigation of characteristics of an AMT (Automated Manual Transmission) which are composed of clutch part and transmission part. When a shilling signal is received from the controller, the clutch is disengaged first, and shifting action including selecting action is followed, and then the clutch is engaged last. The characteristics of transmission shifting response are affected by various parameters of clutch and transmission control elements. Analytical results are in fair agreement with experimental results. It is found that the operating pressure level is the most important for the response of AMT characteristics, and that the other parameters such as natural frequency and damping ratio of the control valve are less important.

• 한국생산제조학회지
• /
• 제9권6호
• /
• pp.9-18
• /
• 2000

This study includes noise automatic inspection system for washing machine auto-transmission one of modern home necessary. We effort to find and certificate sound noise source by sound power and sound intensity, and apply to frequency analysis in vibration related sound noise. still more we have been studying to data acquisition and programming for MS VisualBasic version 5.0. System component is below. 1) Pentium PC or data acquisition. 2) DSO for noise acquisition. 3)S/W for comparison and decision. 4) I/F Board for data communication. Wave form data through the DSO are converting to ASCII code data. The ASCII code through binary converting S/W. Finally we will making noise monitoring system and automatic inspection system.

• 한국자동차공학회논문집
• /
• 제12권4호
• /
• pp.119-128
• /
• 2004

With the growing traffic density and increasing comfort requirements, the automation of the drive train will gain importance in vehicles. The automatic clutch actuation relieves the drivers especially in urban driving and stop-and-go traffic conditions. This paper describes the dynamic modeling of a clutch actuator and clutch spring. The dynamic model of the clutch system is developed using MATLAB/Simulink, and evaluated by experimental data using a test rig. This performance simulator is useful to develop the clutch-by-wire (CBW) system for an automated manual transmission (AMT). The electro-mechanical type CBW system is also implemented as an automatic clutch for AMT. The prototype of CBW system is designed and implemented systematically, which is composed of an electric motor, worm gear and slider-crank mechanism. The test rig is developed to perform the basic function test of the automatic clutch, and the developed prototype is validated by the experimental data on the test rig.

• Current Research on Agriculture and Life Sciences
• /
• 제8권
• /
• pp.107-113
• /
• 1990

본(本) 연구(硏究)는 고성능(高性能) 농약(農藥) 살포기인 스피드 스프레이어에 있어서 농약(農藥)살포 시(時) 인체(人體)에 해로운 농약(農藥)으로부터 오퍼레이터를 보호(保護)하기 위하여 무인(無人) 운전(運轉) 연구(硏究)의 일환(一環)으로 원칩 마이크로 컴퓨터를 이용(利用)하여 원격조종(遠隔操縱) 변속장치(變速裝置)를 개발(開發)할 목적(目的)으로 수행(遂行)한 연구(硏究)에서 얻어진 결과(結果)를 要約(요약)하면 다음과 같다. 1. 시작(試作)한 원칩 마이크로 컴퓨터를 이용(利用)한 원격조종(遠隔操縱) 변속장치(變速裝置)는 변속조작(變速操作) 100회(回) 중(中) 오동작(吳動作)이 전무(全無)하여 조작성(操作性)이 정확(正確)하였다. 2. 使用된 원칩 마이크로 컴퓨터의 프로그램은 기계어(機械語)로 작성(作成)되었으며, 변속조작(變速操作) 시간(時間)이 3초(初) 이내(以內)로 사람에 의한 변속조작(變速操作) 시간(時間)과 거의 같았다. 3. 본(本) 연구(硏究)에 사용(使用)한 원칩 마이크로 컴퓨터는 지금까지 자동화(自動化) 장치(裝置)에 많이 도입(導入) 사용(使用)하던 퍼스널 컴퓨터, 랩탑 컴퓨터, 원 보오도 컴퓨터 등과 비교하여 볼 때 극소형(極小型)으로 소비전력(消費電力)이 작으며 염가(廉價)이기 때문에 농업용(農業用)으로 적합(適合)하다고 사료(思料)된다. 4. 본(本) 연구(硏究)에 사용(使用)된 변속장치(變速裝置)는 승용(乘用) 농업기계(農業機械)와 같은 형식(形式)의 것이므로 농업용(農業用) 트렉터 및 포장기계(圃場機械)의 자동화(自動化) 기계(機械)에도 적용(適用)될 것으로 판단(判斷)된다. 5. 본(本) 실험장치(實驗裝置)는 직접(直接)레버조작(操作) 및 원격조종(遠隔操縱)이 동시(同時)에 이루어지도록 제작(製作)하였기 때문에 구조적(構造的)으로 복잡(複雜)하나 직접(直接)레버 조작부(操作部)를 제거(除去)하고 원격조종부(遠隔操縱部)만 스피드 스프레이어에 장착(裝着)하면 더욱더 소형화(小型化) 되고 중량(重量)도 더 가벼워져 사용(使用)하기에 편리(便利)한 장치(裝置)가 될 것으로 사료(思料)된다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1998년도 춘계학술대회 논문집
• /
• pp.310-315
• /
• 1998

This study includes noise automatic inspection system for washing machine auto-transmission one of modern home necessary. We effort to find and certificate sound noisesource by sound power and sound intensity, and apply to frequency analysis in vibration related sound noise. Still more we have been studying to data acquisition and programming for MS VisualBasic version 5.0. System component is below. 1) Pentium PC for data acquisition. 2) DSO for noise acquisition. 3) S/W for comparison and decision. 4) I/F Board for data communication. Wave form data through the DSO are converting to ASCII code data. The ASCII code through binary converting S/W are to be decision fitness or the badness comparison S/W. Finally, we will making noise monitoring system and automatic inspection system.