• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.12
• /
• pp.1109-1114
• /
• 2015

This paper presents an improved learning-based visual inspection method for auto parts inspection in severe lighting changes. Automobile sunroof frames are produced automatically by robots in most production lines. In the sunroof frame manufacturing process, there is a quality problem with some parts such as volts are missed. Instead of manual sampling inspection using some mechanical jig instruments, a learning-based machine vision system was proposed in the previous research[1]. But, in applying the actual sunroof frame production process, the inspection accuracy of the proposed vision system is much lowered because of severe illumination changes. In order to overcome this capricious environment, some selective feature vectors and cascade classifiers are used for each auto parts. And we are able to improve the inspection accuracy through the re-learning concept for the misclassified data. The effectiveness of the proposed visual inspection method is verified through sufficient experiments in a real sunroof production line.

• Journal of Auto-vehicle Safety Association
• /
• v.10 no.3
• /
• pp.27-31
• /
• 2018

The People have a bad perception about diesel vehicle because of serious air pollution, increase fine dust and global vehicle company's diesel gate. Starting the project in 2005, Ministry of Environment has been supporting that is exhaust gas reduction devices (DPF) on diesel vehicles in the metropolitan area. During the period of 2017.01.01 to 2017.12.31, 10,030 diesel vehicles installed exhaust gas reduction devices (DPF). Among them, 9,921 diesel vehicles that they have sufficient data for analysis were analyzed amount of particulate matter reduction before and after exhaust gas reduction devices (DPF) was installed. Opacity smoke meter measures the concentration of particulate matter. So concentration of particulate matter was converted into a mass unit, and then calculated the total amount of reduced particulate matter. It was estimated that social benefits is costs required to remove it from the total amount of particulate matter.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.225-228
• /
• 2004

환경소음에 관한 연구는 주로 소음노출지역에 대한 소음 측정 및 사회적 조사(Social Survey)를 토대로 이루어 졌다. 이는 장기간 소음에 노출된 사람에 대한 소음평가의 수단뿐만 아니라 소음관련 법안 제정에 있어서 규제치를 결정하는 기준으로도 사용될 수 있다. 이에 반하여 본 논문에서는 소음에 대한 순간적인 반응 즉, 짧은 순간의 소음노출에 대한 주관적 반응을 알아보고자 하였으며, 방법적 측면(Methodology)에서의 제약으로 인하여 가상의 음 재현장치의 구성을 통하여 일반인을 대상으로 청감반응실험을 할 수밖에 없다. 먼저 항공기, 기차, 자동차 소음의 샘플을 녹음하여 일련의 신호처리 과정을 통하여 청감반응실험에 사용될 음원을 만들고, 청력검사를 통하여 청각에 이상이 있다고 판단되는 피검자의 데이터는 배제시킨 후 실험을 행하였다. 이러한 청감반응실험을 통하여 소음원의 종류, 성별, 연령, 소음 민감도 등에 따라 소음에 대한 성가심, 불쾌감의 정도는 다르게 나타남을 알 수 있었다.

• Journal of the Korean Society of Safety
• /
• v.27 no.4
• /
• pp.121-127
• /
• 2012

Vehicle Inspection System is to examine the condition of vehicle regularly at the national level to protect lives and properties of the people from traffic accidents due to vehicle's fault. However, the vehicle inspection method, criteria, period and effectiveness have become a controversial issue, because of examining safety management of vehicle by drivers regardless of regular vehicle inspection. Therefore, the aim of this study is to investigate vehicle inspection timeliness and risk level of inspection items through basic statistical survey and portfolio analysis. The results of the research through practical analysis are: (1) The inspection failure rates between 3 and 6 model year tend to increase. (2) The failure of inspection items for safety highly impacts on traffic accident rate in terms of accident risks. (3) According to the result of portfolio analysis, faulty items located 1st quadrant are riding device, driveline system, controlling device, steering actuator, and fuel system.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.3
• /
• pp.389-396
• /
• 2020

In order to obtain a good quality product, a proper verification of production/test facilities must be preceded before the quality conformity inspection of the product. Among the various production/test facilities, ATE is widely used in the civilian industry such as the automotive industry, aerospace industry, semiconductor industry today. In addition, ATE is actively used in the defense industry production and performance tests. This paper is the result of systematically verifying the Design Conformance of ATS which is ATE of military FM radio set using various methods. And It is expected to be a good reference at the present time when the design conformity verification procedure for ATE for military supplies is not documented.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.7
• /
• pp.718-723
• /
• 2014

In this paper, we developed the inspection system of electric vehicle battery plate using image processing. Four cameras are used for acquiring the principal parts of the plate, and several steps of image processing for extracting significant dimensions of the plate such as widths and lengths. As a preceding step, calibration of four cameras is carried for compensating distorted images using dot-arrayed sheet. Coordinate systems for four cameras are defined where one coordinate system is assigned to the reference coordinate system to which the others are relatively described. Line information of the edge in the windowed image is extracted using elaborate edge-detection algorithm, and finally the intersection points between lines are extracted to calculate widths and lengths of the plate from which the error status of the battery plate is decided.

• Journal of Environmental Health Sciences
• /
• v.24 no.2
• /
• pp.80-87
• /
• 1998

To evaluate the effects on health by exposure to low dose organic solvents, the author analyzed the air concentration of mixed organic solvents (toluene, xylene, butylacetate) at worker's breathing zone during painting, some laboratory findings of blood (WBC, RBC, Hb, Hct, SGOT, SGPT, TC, TG, HDL-C, LDL-C, IgG, IgM, IgA and IgE) and urine (hippuric acid, urinary protein, urobilinogen), surveyed the subjective symptoms those were obtained from 35 male workers exposed to mixed organic solvents, and 25 male workers not exposed to organic solvents who worked in car repair workshops in Taejon area from December 1, 1995, to February 29, 1996. The results were as follows: 1. The mean concentration of urinary hippuric acid of car painting worker group (organic solvent exposure group) was 0.76$\pm$ 0.21 g/l, which is significantly higher than that of non-exposed group. 2. In hematologic findings, the values of RBC, TC, LDL-C, IgG and IgE in the exposure group were significantly lower than those of the nonexposed group, but SGOT and SGPT in the exposure group were significantly higher than those of the non-exposed group. 3. Urinary hippuric acid levels showed positively correlated with toluene, urobilinogen and HDL-C levels, but those were negatively correlated with RBC, LDL-C, IgM levels. 4. Rates of the subjective symptoms such as "dizziness", "appetite loss", "weight loss", "palpitation", "chest tightness", "sore throat and eye discomfort", "tingling sense and acrodynia", "illusion or hallucination" and "decreaased motor power" were significantly higher in the exposure group than those of the non-exposed group.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.8
• /
• pp.965-970
• /
• 2011

We develop a diagnostic system to monitor failures in an engine-assembly line. Existing techniques such as sensory analysis, time domain analysis, frequency analysis, and statistical analysis have limitations in the diagnosis of engine-assembly failure when there are abnormal vibration waveforms (crashing and damping signals) during the assembly. We use a wavelet technique to deal with crashing and damping signals. We also implement a new technique for developing diagnostic rules from sensor data, and we demonstrate its validity.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.6
• /
• pp.571-578
• /
• 2008

Ubiquitous has spotlighted in the industry in these days, and automotive industry has tried to build ubiquitous environment like as 'intelligent driver assistance system' in BMW Inc. even though in shipbuilding industry. As the part of Ubiquitous Technology for visualization, Mixed Reality has been adopted in this paper. Augmented reality, a part of mixed reality, could show the mixed real world, overlapping virtual objects. Therefore, it is more realistic than virtual reality that all generated by computer and it is very useful for displaying information. For this reason, we tried to apply augmented reality to inspect marine structure and we developed the inspection assistance system based on mixed reality

• Journal of Chest Surgery
• /
• v.29 no.2
• /
• pp.208-212
• /
• 1996

From 1990 to 1994, 10 patients were treated for tracheobronchial injury due to blunt trauma. 7 injuries resulted from motor vehicle accident. Common presenting signs included subcutaneous emphysema, dyspnea and hemoptysis. The most common radiologic findings were pneumothorax, pneumomediastinum and hemothorax. The fiberoptic bronchoscopy was highly accurate method for the diagnosis. The operation method is simple closure except one patien underwent right pneumonectomy. One patient died because of respiratory distress and 9 patients recovered uneventfully and returned to normal activity. Early recognition and proper treatment of tracheobronchial injury is important.