• Korean Journal of Construction Engineering and Management
• /
• v.25 no.1
• /
• pp.50-61
• /
• 2024

The market for compact houses is growing due to the demand for floor plans prioritizing user needs. However, clients often have difficulty communicating their spatial requirements to professionals including architects because they lack the means to provide evidence, such as spatial configurations or cost estimates. This research aims to create a framework that can translate sketched data-driven spatial requirements into 3D building components in BIM models to facilitate spatial understanding and provide building performance analysis to aid in budgeting in the early design phase. The research process includes developing a process model, implementing, and validating the framework. The process model describes the data flow within the framework and identifies the required functionality. Implementation involves creating systems and user interfaces to integrate various systems. The validation verifies that the framework can automatically convert sketched space requirements into walls, floors, and roofs in a BIM model. The framework can also automatically calculate material and energy costs based on the BIM model. The developed frame enables clients to efficiently create 3D building components based on the sketched data and facilitates users to understand the space and analyze the building performance through the created BIM models.

• Journal of Chest Surgery
• /
• v.36 no.12
• /
• pp.904-910
• /
• 2003

Thoracoscopic bullectomy (VATS-B) is now the preferred treatment for spontaneous pneumothorax despite of higher recurrence rate than open thoracotomy. Several methods have been used to prevent this problem. The effectiveness of staple line reinforcement (SLR) in VATA-B using endostaplers was assessed by clinical and experimental study. Meterial and Method: In experimental study, canine lungs were harvested immediately (group I N=5) and 48 hours (group II N=5) after stapling. The pressures at which initial air leaks occurred were measured. In clinical study from February 1997 to March 1999, 106 procedures in 104 patients undergoing VATS-B for spontaneous pneumothorax were classified into two groups according to the presence of SLR and were compared. Result: The average pressure of the initial air leakage was significantly higher in SLR than that of staples alone (18$\pm$1.6 vs 48$\pm$3 mm Hg in group I; 23.8$\pm$1.9 vs 54$\pm$4.6 mm Hg in group II, p<0.001). In the clinical data, there were significant differences seen in the duration of drainage, the total length of endostaplers used, and the duration of the postoperative hospital stay between patients with staple alone and patients with SLR (4.4$\pm$1.4 vs 3.1$\pm$1.1 days in duration of drainage, 92.3$\pm$28.1 vs 71.1$\pm$30.6 mm in total length of endostaplers used, 5.9$\pm$1.9 vs 4.6$\pm$1.7 days in postoperative hospital stays, p<0.001). Conclusion: SLR was effective for preventing prolonged air leakage and responsible for shorter hospital stays after VATS-B for the treatment of spontaneous pneumothorax.

• Korean Journal of Construction Engineering and Management
• /
• v.13 no.6
• /
• pp.143-152
• /
• 2012

As the Public Procurement Service announced the compulsory of BIM adaption in every public construction from 2016, the importance of BIM is increasing. Besides, automatic code checking takes significance in terms of the quality control for BIM based design. In this study, rule-sets were defined for Act on the Promotion and Guarantee of Access for the Disabled, the Aged, and Pregnant Women to Facilities and Information. Three analytic steps were suggested to shortlist the objective clauses from the entire code; the frequency analysis using project reviews for architectural code compliance, the clause analysis on quantifiability, and the analysis for model checking possibilities. The shortlisted clauses were transformed into the machine readable rule-set definition. A case study was conducted to verify the adaptiveness and consistency of rule-set definitions. In future study, it is required the methodologies of selecting objective clauses to be specified and its indicators to be quantified. Also case studies should be performed to determine the pre-conditions in modeling and to check interoperability issues and other possible errors in models.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.149-149
• /
• 2017

본 논문은 생산라인 자동화를 위한 로봇으로 제조업 시장 확대에 가장 큰 걸림돌이 되는 가격 경쟁력 및 인력난 해소를 위해 설계하였으며 다양한 소재에 대응하기 위해 그리퍼를 교체하여 적용이 되도록 하였다. 자동화를 위한 로봇은 소재의 내외경 가공 및 검사까지 모든 공정이 일괄적으로 이루어 져야하며 LCD 모니터에 생산수량 및 불량률 등의 정보를 실시간으로 나타내어 효율적인 생산계획을 수립할 수 있도록 하였다. 생산라인 자동화를 위해 로봇의 설계는 Auto CAD를 이용하였다. 부품의 가공은 CNC에 적용하기 위해 자동공급장치를 설계하였다. 가공이 완료된 후 측정한 값을 LCD모니터를 통하여 작업자가 알아볼 수 있게 나타냈다. 외경 1은 40.405, 외경2는 32.201, 내경 1은 23.346, 내경 2는 34.302로 나타났다. 측정결과 불량 측정을 위해 측정부의 결과 값이 나타나며 불량이 발생하면 그래프를 이용하여 어떤 부위에서 발생했는지를 알 수 있도록 하였다. 또한 결과 값은 자동으로 저장되도록 하였다. 생산라인 자동화를 위해 100EA를 측정한 결과 외경 1은 40.40438, 외경2는 32.20164, 내경 1은 23.34830 내경 2는 34.30033의 평균값을 나타냈다. 측정값의 검증은 하이트게이지로 측정한 결과 0.003 이내의 결과를 나타냈다. 따라서 본 로봇 자동화 시스템을 적용한다면 생산성 향상 및 불량률 감소가 가능하여 인력대체 및 가격경쟁력이 가능하다고 판단된다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.3
• /
• pp.107-116
• /
• 2007

The introduction of new renewable energy is going on increase with the second plan of the Korean Government "Technology Development, Utilization and Popularization of New Renewable Energy". In general, it is connected to the power system due to the nature of it's source characteristics but it's interconnection operation impacts on the power system planning and operation. The operation schemes of the existing power distribution system are based on the unidirectional power flow, but unidirectional power flow changes to bidirectional power flow due to the interconnection operation of new renewable energy. It degrade the existing protection coordination system and power quality of the power distribution system. Thus, the technical evaluation process of the interconnection of new renewable energy are necessary. In this paper, the characteristics of the existing automatic recloser and sectionalizer are reviewed and interconnection capacity evaluation method of the DR(distributed resources) in the existing automatic recloser-sectionalizer protective coordination system are proposed.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.15 no.1
• /
• pp.117-129
• /
• 1997

In recent years, the 1 : 5,000 scale Digital National Basemap(DNB) has been generated under National Geo-graphic Information System(NGIS) Project. The DNB database generated will be the backdrop data for thematic maps, underground facilities maps and so on. The DNB database will be distributed to the government and private sectors in near future so that it should meet the requirements as the basic data. In order to assure the quality of DNB database, the establishment of quality assurance process to database was in great need. In this study, we were mainly concerned with improving the quality of digital national basemap database in geomatric aspect as well as the processing time due to the amount of digital data generated. As a results of this study, the quality assuance process of DNB database is established and automatic quality assurance program is developed. Also, the program developed in this study is contributed to quality assurance of DNB database as well as economic aspects.

• The Journal of the Korea Contents Association
• /
• v.12 no.3
• /
• pp.34-43
• /
• 2012

Determining the similarity between two strings can be applied various area such as information retrieval, spell checker and spam filtering. Similarity calculation between Korean strings based on dynamic programming methods firstly requires a definition of the similarity between phonemes. However, existing methods have a limitation that they use manually set similarity scores. In this paper, we propose a method to automatically calculate inter-phoneme similarity from a given set of variant words using a PAM-like probabilistic model. Our proposed method first finds the pairs of similar words from a given word set, and derives derivation rules from text alignment results among the similar word pairs. Then, similarity scores are calculated from the frequencies of variations between different phonemes. As an experimental result, we show an improvement of 10.1%~14.1% and 8.1%~11.8% in terms of sensitivity compared with the simple match-mismatch scoring scheme and the manually set inter-phoneme similarity scheme, respectively, with a specificity of 77.2%~80.4%.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.7
• /
• pp.716-726
• /
• 2010

In this research, design optimization of an aircraft wing has been performed using the fully automated Multidisciplinary Design Optimization (MDO) framework, which integrates aerodynamic and structural analysis considering nonlinear structural behavior. A computational fluid dynamics (CFD) mesh is generated automatically from parametric modeling using CATIA and Gambit, followed by an automatic flow analysis using FLUENT. A computational structure mechanics (CSM) mesh is generated automatically by the parametric method of the CATIA and visual basic script of NASTRAN-FX. The structure is analyzed by ABAQUS. Interaction between CFD and CSM is performed by a fully automated system. The Response Surface Method (RSM) is applied for optimization, helping to achieve the global optimum. The optimization design result demonstrates successful application of the fully automated MDO framework.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.3
• /
• pp.229-237
• /
• 2008

In this research, a MDO(multi-disciplinary design optimization) framework, which integrates aerodynamic and structural analysis to design an aircraft wing, is constructed. Whole optimization process is automated by a parametric-modeling approach. A CFD mesh is generated automatically from parametric modeling of CATIA and Gridgen followed by automatic flow analysis using Fluent. Finite element mesh is generated automatically by parametric method of MSC.Patran PCL. Aerodynamic load is transferred to Finite element model by the volume spline method. RSM(Response Surface Method) is applied for optimization, which helps to achieve global optimum. As the design problem to test the current MDO framework, a wing weight minimization with constraints of lift-drag ratio and deflection of the wing is selected. Aspect ratio, taper ratio and sweepback angle are defined as design variables. The optimization result demonstrates the successful construction of the MDO framework.

• Journal of Intelligence and Information Systems
• /
• v.10 no.1
• /
• pp.47-63
• /
• 2004

Today, there are several markets in cyber space where companies trade electronically due to the development of Information Technology. On the other hand, the most important thing in trades is negotiation. So, in order to support current business practices as well as new ones on the Internet, electronic commerce systems need an ability to negotiate. In this paper, proposed is a method by which a seller can be supported by an agent which plays a role in negotiation process among small and medium companies especially injection mold manufacturer. If the manufacturing capacity cannot afford to produce all orders, the manufacturer may want to extend due dates and the buyers may want to discount prices. The negotiation agent discussed in this paper cooperates with the schedule agent to get due-date information, and performs a role in one (seller)-to-many (buyer) negotiation processes.