• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.14 no.5
• /
• pp.362-368
• /
• 2021

A homeotropic liquid crystal (LC) alignment state on rubbed fluorinated self-assembled monolayers (FSAMs) is described according to alkyl chain length. A simple procedure, gas-phase method, for the preparation of FSAM was used. The average optical transmittance in the visible light range of FSAMs were 76.63% to 78.21%, which were superior to the conventional polyimide layer having a transmittance of 75.89%. In addition, the excellent homeotropic LC alignment characteristics of FSAMs were observed through pretilt angle measurement and polarized optical microscope images. By measuring the contact angles and the surface energies of FSAMs, it was confirmed that pretilt angles of LC molecules increased according to the alkyl chain length. High optical transparency and uniform homeotropic LC alignment characteristics of FSAMs showed the possibility of FSAMs as an LC alignment layers.

• Journal of IKEEE
• /
• v.27 no.1
• /
• pp.30-37
• /
• 2023

To improve the efficiency and stability of colloidal quantum dot light-emitting diodes (QD-LEDs), it is essential to achieve charge balance within the QD emissive layer. Zinc oxide (ZnO) is widely used for constructing an electron transport layer in the state-of-the-art QD-LEDs, but spontaneous electron injection from ZnO often results in excessive electrons in QDs that significantly deteriorate the performance of QD-LEDs. In this study, we demonstrated the improved performance of QD-LEDs by modifying the electron injection property of ZnO with self-assembled monolayer (SAM)-treatment. As a result of improved charge balance, the external quantum efficiency and maximum luminance of QD-LEDs with SAM-treatment were improved by 25% and 200%, respectively, compared to the devices without SAM-treatment.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.16 no.2
• /
• pp.109-115
• /
• 2023

In this paper, we demonstrated the orientation characteristics of liquid crystals using UV-treated FSAM as alignment layer. Moreover we confirmed the FSAM properties before and after UV treatment on indium tin oxide (ITO) glass substrates using physicochemical analysis. The hydrophobic property of the FSAM surface is change to hydrophilic through UV treatment. After UV treatment the LC molecules also were uniformly and horizontally aligned on the FSAM surfaces and the pretilt angle was obviously changed 90° degrees to 0° degrees. EO characteristic of TN cell which was fabricated with UV-treated FSAM was faster response time compare to conventional PI layer. The FSAM before and after UV treatment has a superior application potential as the LC alignment layer for LCD, potentially replacing the conventional polyimide layer.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.33.1-33.1
• /
• 2011

최근 산업에서는 산업의 고도화로 인한 환경오염이 큰 문제로 대두되고 있다. 이러한 문제점을 해결하기 위한 방안 중, 친환경소재에 대해 연구가 활발히 진행하고 있다. 연잎의 자기세정효과(self-cleaning effect)에 관한 연구는 이러한 친환경소재에 대한 연구 중 하나이다. 연잎의 표면은 마이크로 크기의 돌기와 나노 크기의 왁스의 dual-scale의 구조로 이루어져 있으며, 왁스의 경우 소수성을 가진다. 이러한 dual-scale 구조와 소수성의 왁스에 의해 초소수성이 발현되고, 결과적으로 연잎의 자기세정효과가 발현된다. 본 연구에서는 나노임프린트 리소그래피와 수열합성법을 이용한 나노로드 성장을 이용하여, 연잎의 dual-scale의 표면구조를 형성하는 실험을 진행하였다. 나노임프린트 리소그래피와 수열합성법은 다른 공정에 비하여 상대적으로 적은 비용을 필요로 하고, 대면적에 적용이 가능한 기술이다. 실험 진행은 먼저 silicon 마스터 스탬프를 역상으로 복제한 PDMS (Polydimethylsiloxane) 스탬프와 $TiO_2$ sol을 이용하여 기판 위에 $TiO_2$ gel 패턴을 형성한 후, 열처리 과정을 통해 $TiO_2$ gel 패턴을 결정화한다. 다음으로 결정화된 $TiO_2$ 패턴 기판을 수열합성 방법을 이용하여 $TiO_2$ 나노로드를 무작위적으로 형성하였다. 마지막으로 소수성을 갖는 자기 조립 단분자막 용액을 이용하여 소수성 표면처리를 한 후 접촉각을 측정하였다. 본 연구에서 개발한 기술을 이용하여 다양한 형태의 기판에 초소수성 표면을 형성할 수 있고, 자기세정효과를 갖는 표면을 구현할 수 있다.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.10a
• /
• pp.367-370
• /
• 2003

In this study, application of SAM (self-assembled monolayer) to nano replication process as an anti-adhesion layer was presented to reduce the surface energy between the nano mold and the replicated polymeric nano patterns. The electron beam lithography was used for master nano patterns and the electorforming process was used to fabricate the nickel nano stamper. Alkanethiol SAM as an anti-adhesion layer was deposited on metallic nano stamper using solution deposition method. To analyze wettability and adhesion force of SAM, contact angle and LFM (Lateral Force Microscopy) were measured at the actual processing temperature and pressure for the case of nano compression molding and at the actual UV dose for the case of nano UV molding. It was found that the surface energy due to SAM deposition on the nickel nano stamper markedly decreased and the quality of SAM on the nickel stamper maintained under the actual molding environments.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.3
• /
• pp.107-110
• /
• 2006

We fabricated the monolayers onto QCM by self-assembly using viologen, which has been widely used as electron acceptor. A gold electrode of the QCM was cleaned by piranha solution and prepared the ethanol-acetonitrile(1:1) solution with 2 m mol/l viololgen compounding of pure hi gas. We determined the time dependence to resonant frequency shift during self-assembly process and the electrochemical behavior of the self-assembled viologen monolayers by cyclic voltammetry. With increasing scan rate, the redox peak current of the viologen increased linearly. This was signified that the redox reaction was reversible. The EQCM measurements revealed the anions transfer during redox reactions, respectively. From the EQCM data, the well-defined shape peaks were nearly equal charges by cyclic voltammetry.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.129-129
• /
• 2004

본 연구에서는 나노스케일 절삭가공(nanometric cutting process)시에 미세 팁과 가공표면사이에서 발생하는 현상들에 대하여 분자동역학적 시뮬레이션을 통하여 살펴보았다 본 연구의 목적은 실험적으로는 파악하기 어려운 극미세 가공에서 발생하는 나노트라이볼로지적 현상을 이해하고, 이를 토대로 기계적 가공에 기반하여 개발된 '기계-화학적 나노리소그래피(Mechano-Chemical Scanning Probe Lithography)' 공정을 개선, 발전시키는데 있다. 기계-화학적 나노리소그래피 기술은 극초박막의 리지스트(resist)를 미세탐침을 이용하여 기계적 가공으로 제거하고 이로인해 표면으로 드러난 모재부분을 화학적 에칭에 의해 추가로 가공하여 원하는 패턴형상을 얻어내는 기술이다.(중략)

• Journal of the Korean institute of surface engineering
• /
• v.53 no.5
• /
• pp.265-270
• /
• 2020

We investigated mechanochemical radical, which is concomitant with chemical lift-off lithography(CLL), on the self-assembled monolayer(SAM)/electrodes and a polydimethylsiloxane(PDMS) using a colorimetric and a spectroscopic method. The 11-mercaptoundecanol(MUO)/Au or the 11-hydroxyundecylphosphonic acid (HUPA)/ITO were contacted with bare or activated PDMS. After contact, the each of SAM/substrates and the PDMS were immersed in a 2,2 Diphenyl-1-picrylhydrazyl(DPPH) radical scavenger. The color of the DPPH exposed to the PDMS was changed from purple to yellow and the absorbance decreased definitely at 515 nm wavelength. The SAM/substrates, however, have caused small changes in spectroscopic property, indicating no existence of radical species. We concluded that mechanochemical radicals were formed by homolytic cleavage of PDMS molecules upon external force and hardly transferred on the SAM/substrates.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.209-209
• /
• 2007

Ni stamper위에 100nm의 Si 코팅후 자기조립 단분자막(SAM)을 액상 코팅방식으로 형성 하였고, 내구성 및 열적 안정성을 검증하기 위해 반복적인 이형 및 압력인가 test가 실시하였다. 20회 이상의 이형실험을 통해 열적, 기계적 안정성을 확인하고, 접촉각 측정을 통해 이형특성의 안정성도 고찰하였다. 이를 Imprint공법을 적용 fine pattern의 구조물을 얻을 수 있었다. SAM코팅은 TRICHLOROSILANE을 사용하였으며 Hexane과 1000:1의 비율로 섞어서 stirrer에서 mixing하는 방식을 사용했으며, UV-ozone처리를 통한 이형성 제거 효과도 관찰하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.395-396
• /
• 2005

We fabricated self-assembled monolayers(SAMs) onto quartz crystal microbalance(QCM) using viologen, which has been widely used as electron acceptor and electron transfer mediator. We determined the time dependence to resonant frequency shift during self-assembly process and observed the morphology of self-assembled mono layers by STM and investigated the electrochemical behavior of SAMs by cyclic voltammetry. Electrochemical deposition of viologen was investigated using electrochemical quartz crystal microbalance(EQCM). The redox reactions of viologen were highly reversible and the EQCM has been employed to monitor the electrochemically induced adsorption of SAMs during the redox reactions.