• Proceedings of the KSCN Conference
• /
• 2003.11a
• /
• pp.1076-1076
• /
• 2003

최근 소득수준의 향상 및 식생활 습관의 서구화로 비만 유병율이 증가하면서 체중조절에 대한 관심이 급증하였다. 그러나 신체적 매력 중에서 날씬함을 너무 강조하는 사회적 분위기 등의 영향으로 자신의 체형을 왜곡되게 인식함으로써 이에 따른 신체에 대한 불만족은 무분별한 체중조절을 시도하도록 자극하는 요인이 되고 있으며 이러한 무리한 체중조절은 신체적·심리적 장애를 초래하는 것으로 알려지고 있다. 그러나 체형인식 및 체중조절에 대한 연구는 주로 젊은 여성들을 대상으로 한 것이 대부분으로 중년여성을 대상으로 한 연구는 거의 없는 실정이다. 따라서 본 연구에서는 자기체형에 대한 관심이 점차 높아지고 있는 중년여성들을 대상으로 비만도에 따른 체형인식 경향을 파악하고 체중조절에 영향을 미치는 요인들을 알아보고자 하였다. 조사대상은 도시지역에 거주하는 40세 이상 중년여성 249명으로 일반사항, 체형인식 및 체중조절태도, 이상식행동 등에 대하여 설문조사를 실시하였다. 모든 자료는 SAS program을 이용하여 분석하였다. 조사대상자의 평균 연령은 48.5세였으며 평균 비만도(BMI)는 22.7로서 정상범위에 속하였다. 비만도에 따른 체중군별 분포는 정상체중군이 72.9%로 가장 많았으며, 저체중군이 6.7%, 과체중군이 20.4%이었다. 자기 체형에 대한 인식도를 체중군별로 비교해본 결과, 정상체중군의 40.1%만이 자신의 체형을 ‘표준체형’으로 올바르게 인식하고 있을 뿐, 8.1%는 ‘마른 체형’으로, 51.7%는 ‘살찐 체형’으로 잘못 인식하고 있는 것으로 나타났다. 특히, 저체중군의 37.5%는 자신의 체형이 ‘표준체형’이라고 인식하고 있었다. 이상적으로 생각하는 체형에 대하여 조사대상자의 80.9%가 ‘표준체형’이라고 응답하였으며, 8.7%는 ‘마른 체형’을, 10.4%는 ‘살찐 체형’을 선호하는 것으로 나타났다. 자기 체형에 대해 조사대상자의 55.8%가 ‘불만족하다’ 고 응답한 반면 ‘만족하다’ 고 응답한 경우는 11.1%에 불과하였다. 그러나 체중조절에 대한 관심도는 체중군별로 비교해 보았을 때, 과체중군이 저체중이나 정상체중군에 비해 유의하게 높았다. 지난 1년 동안의 체중 감량 경험 여부를 조사해본 결과, 과체중군의 77.1%, 정상체중군의 65.3%, 저체중군의 62.5%가 체중감량 경험이 있는 것으로 나타났다. 체중감량 이유를 묻는 문항에 과체중군과 정상체중군의 경우 ‘건강을 위해서’라고 응답한 경우가 가장 많은 반면 저체중군의 경우 ‘체중이 증가되었기 때문에’라고 응답한 경우가 가장 많아 체중군별로 유의적인 차이를 나타냈다. 조사대상자의 53.8%가 체중감량을 하는 중 부작용을 경험한 적이 있는 것으로 나타났으며, 유의적인 차이는 없었으나 저체중군이 과체중이나 정상체중군에 비해 체중감량에 따른 부작용 경험자의 비율이 높았다. 이상식행동을 측정한 결과, 과체중이나 저체중군이 정상체중군에 비해 이상식행동 점수가 유의적으로 높았다. 세부요인별로 비교해 보았을 때, 체중조절에 대한 집착과 식이조절점수는 과체중군이 가장 높았으나, 섭식통제 관련 식행동 점수는 저체중군이 가장 높았다. 이상의 결과를 종합해 볼 때, 중년여성들의 경우 대부분이 자신의 실제 체형에 대하여 그릇된 인식을 갖고 있었으며, 체중을 감량하기 위해 지속적으로 노력하는 것으로 나타났다. 특히 저체중군의 경우 건강보다는 외모 때문에 무리한 체중감량을 시도하고 있었으며 이상식습관과 관련된 식행동 점수가 높은 경향을 보여 영양 및 건강 상태에 문제가 발생될 수 있을 것으로 생각된다. 따라서 중년여성들에게 자신의 체형과 이상체형에 대한 올바른 인식을 갖고 표준 체중을 유지할 수 있도록 지속적인 영양교육이 이루어져야 할 것으로 생각된다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.3
• /
• pp.259-264
• /
• 2014

This paper is research paper on the MPD(Magnet Position Device) for the outdoor MGV(Magnet /Magnet Gyro Guidance Vehicle). Usually, MGV is used in indoor environment because of a measurement height of the magnet position device. CMPD(Commercial magnet position device) has 30 mm measurement height, so this is suitable structure in indoor environment like to a flat surface. Outdoor environment is an uneven and irregular, So Outdoor MGV must has a suspension. But CMPD is unsuitable for outdoor environment because of a collision with a surface caused by suspension. Thus, measurement height of the outdoor MPD is positively necessary more than 100 mm. So, we suggest the outdoor MPD using analog magnet hall sensor, moving average filter and Characteristic(rate of the magnet hall sensor) function of the localization. Result of the experiments, the proposed Magnet Position Device for the outdoor MGV has localization accuracy 4.31 mm, measurement height 150 mm and width 150 mm and is efficient more than CMPD.

• The Korean Journal of Quaternary Research
• /
• v.16 no.2
• /
• pp.33-38
• /
• 2002

28 direction of the past Korean geomagnetic field were determined by archaeomagnetic measurements of 734 oriented samples, collected from baked earths of remains in the southern Korea. These data cover periods of A.D. 39C, A.D. 1317 and A.D. 15-l6C. It is noted that Korean geomagnetic field data in 5-6C arc similar to those of contemporary Japanese geomagnetic field, but Korean geomagnetic field data in A.D. 3-4C deflect more easterly than contemporary Japanese geomagnetic field. The observed large difference of geomagnetic field direction between Korea and Japan suggests the existence of a prominent local geomagnetic anomaly in the vicinity of Japan and Korea in the period of A.D. 3-4C. An approximate figure of Korean archaeomagnetic secular curve for the periods of A.D. 3-6C and A.D. 7-9C was obtained. This curve is sure to be helpful for Korean archaeology to data the last firing of baked earths accompanied with no relics.

• Journal of the Korean Magnetics Society
• /
• v.7 no.3
• /
• pp.146-151
• /
• 1997

Buffer (t $\AA$)/ CoFe(35$\AA$)/Cu (50$\AA$)/Co (35$\AA$) sandwiches prepared by dc magnetron sputtering on Corning glass substrates using the $Co_{90}Fe_{10}$ and Co layers with different coercivities. Dependence of magnetoresistance on the type and thickness of buffer layers, and on the thickness of Cu and the magnetic layers in buffer/ CoFe/Cu /Co sandwiches were investigated. Magnetoresistance ratio and saturation field $H_s$ increased as thickness of the buffer layer becomes thicker, then decreased smoothly after a maximum value. An improved filed sensitivity was realized with the $Ni_{81}Fe_{19}$ buffer layer.

• Journal of the Korean Magnetics Society
• /
• v.8 no.1
• /
• pp.34-41
• /
• 1998

We have theoretically investigated torque curve shapes of simple uniaxial magnetic materials by considering conditions for round peaks to exist. These conditions are functions of an applied field, anisotropy field, ans lowest critical field $h_0$ for a domain wall to move or nucleate. The peak having a height of 2h appears when h is lower than h$_1$, the peak having a height of 1 appears when h is higher than h$_2$, ans two peaks having heights of 1 and -1 appear when h is higher than h$_3$. It was found that torque curves of simple uniaxial magnetic materials could be classified into 8 distinct types depending on the existence of hysteresis, the number of the round peaks, and the reversal mechanisms. Simple uniaxial magnetic materials also found to be classifed into the 5 groups depending on $h_0$.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.8
• /
• pp.871-877
• /
• 2003

In this paper, the design parameters for the magnetic field source at extremely low frequency are proposed. This facility can be used fur in vivo experiments with small animals to investigate biological response to the driving magnetic fields. In case that the exposed animals are motionless, the animals may be affected by the directivity of driving field. To avoid this effect, a 2-axis ELF magnetic field driving apparatus was designed. The optimum location and number of turns of each coil were obtained by numerical analysis. Applying these data to the MATLAB code(for computation), the magnetic field distribution was obtained. The calculation result fur a well-designed facility showed that the space in which the amplitude of the magnetic field lies within the 95 % of the magnetic field distribution was more than 60 % of each axis length.

• Journal of Digital Convergence
• /
• v.15 no.1
• /
• pp.471-484
• /
• 2017

The objective of this study is to develop self-esteem program for elementary school students by accepting themselves. Elementary school students' self-esteem is closely related with accepting themselves as they are. For this reason, the contents of this study were consisted of stability, self-understanding, self-acceptance, self-respect, personal relationships. Three experts accomplished program structure and contents design performed by two tests on validity. The need-survey for this was based on the participants who were 93 elementary school students and 32 elementary school teachers. Also, this program was designed in 3 steps of observation, conversion and relation-orientation. The contents of these steps are related with this program's propriety. This program has a little weakness in behavioristic sides because it concentrated on cognitive and affective aspect for the self-esteem development of elementary school students.

• Journal of the Korean Magnetics Society
• /
• v.2 no.2
• /
• pp.119-124
• /
• 1992

We have investigated the effects of sputtering Ar gas pressure on magnetic and magneto-optical properties in compositionally modulated Co/Pd superlattice thin films. The samples were prepared by dc magnetron sputtering from 2-in.-diam Co and Pd targets by alternately exposing the substrates to targets. Sputtering Ar gas pressure was varied from 2 to 30 mTorr. All samples had same bilayer thicknesses composed of 2-$\AA$-thick Co and 9-$\AA$-thick Pd sublayers. It was observed that the colum-nar structure was more distinctively developed with increasing Ar gas pressure. We observed that the intrinsic uniaxial anisotropy energy, magnetization and polar Kerr rotation were decreased with increasing Ar gas pressures. Large coercivity and perfect squareness were attained by the deposition at the high Ar gas pressure. We believe that the results are mainly ascribed the variation of micro-structure with sputtering Ar gas pressure.

• Journal of the Korean Magnetics Society
• /
• v.27 no.3
• /
• pp.82-86
• /
• 2017

The IrMn based GMR-SV films with three different buffer layers were prepared on Corning glass by using ion beam deposition and DC magnetron sputtering method. The major and minor magnetoresistance curves for three different buffer layers beneath the structure of NiFe(15 nm)/CoFe(5 nm)/Cu(2.5 nm)/CoFe(5 nm)/NiFe(7 nm)/IrMn(10 nm)/Ta(5 nm) at room temperature have shown different magnetoresistance properties. When the samples were annealed at $250^{\circ}C$ in vacuum, the magnetoresistance ratio, the coercivity of pinned ferromagnetic layer, and the interlayer coupling field of free ferromagnetic layer were enhanced while the exchange bias coupling field did not show noticeable changes.

• Journal of the Korean Magnetics Society
• /
• v.9 no.3
• /
• pp.159-165
• /
• 1999

Structural, magnetic and magnetoresistance behavior of NiFe/Ag multilayers prepared by a magnetron sputter under an Ar and $Ar/H_2$ atmosphere was studied. It was difficult to make a uniform multilayer by using an Ar atmosphere. However, the uniform multilayers could be fabricated by using an $Ar/H_2$ atmosphere. This was thought to be due to decrease in the energy of the sputtered atom and Ar content of the film. Typical magnetoresistance behavior of the discontinuous NiFe/Ag multilayers appeared when the uniform multilayer was formed and annealed. Substrate temperature did not improve the uniformity of the multilayers. Above 20$0^{\circ}C$ of the substrate temperature, the films were almost formed into granular alloys rather than multilayers.