• Journal of agriculture & life science
• /
• v.45 no.4
• /
• pp.135-141
• /
• 2011

This research was conducted to provide basic data of surplus heat for designing solar heat-storage systems. The surplus heat is defined as the heat exhausted by forced ventilations from the greenhouses to control the greenhouse temperature within setting limits. Various simulations were performed to compare the differences of thermal behaviors among greenhouse types as well as among several domestic areas by using pseudo-TMY (Typical Meteorological Year) data manipulated based both on the weather data supplied from Korean Meteorological Administration and the TMY data supplied from The Korean Solar Energy Society. Additional analyses were carried out to examine the required heating energy together with some others such as the energy balances in greenhouses to be considered. The results of those researches are summarized as follows. Regional surplus solar heats for the nine regions with 4-type were analyzed. The results showed that the ratio of surplus solar energy compared to heating energy was the highest in Jeju (about 212.0~228.0%) for each greenhouse type. And followed by Busan, Kwangju, Jinju, Daegu, Daejeon, Jeonju, Suwon and Daekwanryung. And irrespective of greenhouse types, surplus solar energy alone could cover up nearly all of the required supplemental heating energy except for a few areas.

• Journal of Bio-Environment Control
• /
• v.20 no.2
• /
• pp.83-92
• /
• 2011

This study is about an analysis of surplus solar energy by important greenhouse type using Typical Meteorological Year (TMY) data which was secured in order to provide basic data for designing an optimum thermal storage system to accumulate surplus solar energy generated in greenhouses during the daytime. The 07-auto-1 and 08-auto-1 types showed similar heat budget tendencies regardless of greenhouse types. In other words, the ratios of surplus solar energy were about 20.0~29.0% regardless of greenhouse type. About 54.0~225.0% and 53.0~218.0% of required heating energy will be able to be supplemented respectively according to the greenhouse types. The 07-mono-1 and 07-mono-3 types also showed similar heat budget tendencies regardless of greenhouse types. In other words, the ratios of surplus solar energy were about 20.0~26.0% and 21.0~27.0% respectively by greenhouse type. About 57.0~211.0% and 62.0~228.0% of required heating energy will be able to be supplemented by greenhouse type. Except for Daegwallyeong and Suwon area, other regions can cover heating energy only by surplus solar energy, according to the study.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.65-65
• /
• 2017

상수관망 시스템(Water Distribution System, WDS)은 원활한 용수 공급을 위해 구축된 사회기반시설물로써, 물 공급절차에 따라 그 구성요소를 공급원, 공급 경로, 수요지 등의 범주로 구분할 수 있다. 원활한 물 공급이란 수요지에서 요구하는 수량과 압력 수준을 충족시키는 것을 의미하며, 따라서 상수관망의 용수공급능력은 요구 수량 및 압력과 실제 공급 결과를 비교함으로써 가늠할 수 있다. 과거에는 두 가지 기준을 별도로 산정하여 이를 평가하였으나, 유량과 압력을 함께 고려할 수 있는 에너지 기반의 평가 방법이 제시되면서 시스템 내 에너지 분포를 정량화하여 시스템의 용수공급능력을 평가하는 연구가 주목받고 있다. 세계적으로 많은 연구자들은 시스템 내 에너지 흐름 상태를 정량화함으로써 다양한 형태의 상수관망의 신뢰도지수(Reliability Index)를 제안한 바 있다. 이 때, 대부분의 신뢰도 지수 연구에서는 수요지에 공급된 에너지를 기본적으로 유지해야 하는 최소요구 에너지(Required Energy)와 비상 상황에 대응하기 위한 잉여 에너지(Surplus Energy)로 구분하고 있으며, 잉여 에너지를 상수관망의 공급 안정성을 나타내는 핵심 요소로 활용하고 있다. 확보된 잉여 에너지는 비상시 최소요구 에너지를 대체하는 개념에서 복원력으로 표현되어, 잘 알려진 Resilience Index(RI)를 비롯해 많은 복원력 지수가 존재한다. 본 연구에서는 복원력 지수를 포함한 세 가지의 신뢰도 지수를 적용하여 상수관망의 용수공급 상황 변화에 따른 시스템의 안정성을 분석하였다. 특히, 절점별 복원력 지수를 산정하고 그 분포를 공간적으로 도시하여 파악함으로써, 비상시 효율적인 운영을 위한 판단기준으로써 신뢰도 지수를 폭 넓게 활용할 수 있음을 제시하였다.

• Journal of agriculture & life science
• /
• v.46 no.1
• /
• pp.195-206
• /
• 2012

This study is about an analysis of surplus solar energy by important greenhouse types as well as setting temperature different by using Typical Meteorological Year data which was secured in order to provide basic data for designing an optimum thermal storage system to accumulate surplus solar energy generating in greenhouses during the daytime. Depending on the setting temperatures of $15{\sim}19^{\circ}C$ for greenhouse heating during day and night, surplus heat amounts were varied at the rate of about $0.2{\sim}6.9%/4^{\circ}C$ with some variations according to the greenhouse types and regions. On the other hand, the variations of supplemental heat requirements were about $29.7{\sim}50.0%/4^{\circ}C$. Depending on the setting temperatures for greenhouse ventilations(low $25{\sim}29^{\circ}C$ and high $27{\sim}31^{\circ}C$), surplus heat amounts were varied at the rate of about $-9.9{\sim}-35.6%/4^{\circ}C$ in auto-type greenhouse. But in single-type greenhouses, they were about $-5.1{\sim}-13.4%/4^{\circ}C$. There were not significant changes in supplemental heat amounts depending on setting temperatures of ventilation for both greenhouse types and regions.

• Journal of Bio-Environment Control
• /
• v.22 no.2
• /
• pp.91-99
• /
• 2013

This research analyzed surplus solar energy in Venlo-type greenhouse using acquired typical meteorological year (TMY) data for designing a heat storage system for the surplus solar energy generated in the greenhouse during the day. In the case of paprika, the region-dependent heating loads for Jeju, Jinju, and Daegwanryong area were approximately 1,107.8 GJ, 1,010.0 GJ, and 3,118.5 GJ, respectively. The surplus solar energy measured in Jeju area was 1,845.4 GJ, Jinju area 1,881.8 GJ, and Daegwanryong area 2,061.8 GJ, with the Daegwanryong area showing 11.7% and 9.6% higher than the Jeju region and Jinju region respectively. In the case of chrysanthemums, regional heating loads were determined as 1,202.5 GJ for the Jeju region, 1,042.0 GJ for the Jinju region, and 3,288.6 GJ for the Daegwanryong region; the regional differences were similar to those for paprika. The recorded surplus solar energy was 1,435.2 GJ, 1,536.2 GJ, and 1,734.6 GJ for Jeju, Jinju, and Daegwanryong region, respectively. The Daegwanryong region recorded heating loads 20.9% and 12.9% higher than in the Jeju and Jinju region, respectively. From the above, it can be said that cultivating paprika, compared to cultivating chrysanthemums, requires less heating energy regardless of the region and tends to yield more surplus solar energy. Moreover, if the Daekwan Pass region is excluded, the surplus solar energy exceeds the energy required for heating. Although the required heating energy differs according to regions and crops, cucumbers were found to require the highest amount, followed by chrysanthemum and paprika. The amount of surplus solar energy was the highest in the case of paprika, followed by cucumber and chrysanthemum.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1130-1131
• /
• 2008

현재는 화석연료에서 신재생에너지로 에너지 패러다임이 변화하고 있는 시점이며, 신재생에너지를 보다 효율적으로 운영하여 효율성을 높이기 위해 많은 연구가 이루어지고 있다. 전기 에너지는 생산과 동시에 소비해야 한다는 특성을 가지고 있으며, 그 중 태양광 발전과 같은 신재생에너지원은 기후요인에 의해 출력이 결정되기 때문에 수요전력보다 공급전력이 많아 잉여전력이 생기거나 공급전력보다 수요전력이 많아 부족전력이 발생하여 전력품질을 악화시킬 수 있다는 단점이 있다. 본 논문에서는 이런 태양광 발전의 단점을 보완하기 위해서는 잉여전력이 발생한 경우는 Battery와 Electrolyzer를 이용하여 에너지를 저장하고 부족전력이 발생한 경우는 Battery를 이용하여 보상하는 방법을 제안하였다.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.164-165
• /
• 2011

본 논문에서는 전력계통의 동요시 넓은 범위의 안정영역을 확보하고 발전기의 댐핑을 향상시킬 수 있는 새로운 조속기 제어기를 제안한다. 전력계통의 안정도는 대부분 고장기간 동안 발전기에 축적된 잉여 운동에너지에 크게 영향을 받기 때문에 이러한 잉여에너지에 대한 효과적인 제어는 조속기를 통해 이루어 질 수 있으며, 전력계통 안정도를 향상시킬 수 있는 가장 직접적인 방법이다. 제안된 Output Feedback 제어기는 모든 주파수 조절상수(R)에 대해 넓은 범위의 안정성을 보장하고, 미분기를 대신할 수 있도록 발전기 동요방정식을 적용한다.

• Journal of the Korean Society of Mechanical Technology
• /
• v.13 no.4
• /
• pp.71-76
• /
• 2011

Earth to air heat exchangers made by iron, aluminium, copper and poly-ethylene pipe for single greenhouse heating were experimented and blowers. Earth to air heat exchanger was installed by pipelines in earth tube at 70cm depths and air blower was the heating capacity 3kW/h, As the result, Temperature difference due to temperature history of the inlet and outlet air on the various type in earth tube in greenhouse showed that air temperature at the various type in earth tube, comparison tube were make no difference respectively. Under the experimental condition, heat fluxes and heating load were showed 6,800Kcal/h, 19,699kcal/h generally yield of Lactuca Sativa cultured during days of sowing 90day in greenhouse using copper pipe was 170% incleased.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.50.1-50.1
• /
• 2011

전력수요가 적을 때 잉여전력을 저장하고 전력수요가 많은 시간대나 전기료가 비싼 시간대에 저장된 전력을 사용함으로서 전력의 활용 효율을 높이고, 전력공급 시스템을 안정화하기 위해 에너지저장시스템의 연구가 최근에 활발히 진행되고 있다. 또한 공장, 산업용빌딩이나 병원 등 고르고 안정적인 전력의 수요는 늘어나고 있으며, 화석 연료 고갈 문제로 인한 신재생에너지 발전의 중요성도 대두되고 있다. 본 논문에서는 무정전 전원장치, 태양광발전시스템, 에너지 저장 시스템을 모두 통합하였다. 제안한 시스템은 3상 인버터, 부스트 컨버터, 양방향 컨버터, 사이리스터 스위치로 구성된다. 인버터는 계통과 연계되거나 UPS 동작 시 AC 전력을 만든다. 부스트 컨버터는 태양광 패널과 연결되어 MPPT 제어를 수행한다. 양방향 컨버터는 잉여전력을 배터리에 저장을 하고, 전력이 부족할 시에는 배터리의 전력을 방전한다. 사이리스터 스위치는 정전 시 계통과 부하를 끊어주는 역할을 한다. 본 논문에서는 15kW급 시스템으로 구현하여 검증하였다.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.30 no.4
• /
• pp.5-13
• /
• 2022

The current environmental problem is that environmental pollution is accelerating due to the generation of large amounts of waste and indiscriminate consumption of energy. Fossil fuels, a representative energy production fuel, are burned in the process of producing energy, generating a large amount of greenhouse gases and eventually causing climate change. In addition, the amount of waste generated worldwide is continuously increasing, and environmental pollution is occurring in the process of waste treatment. One of the methods for simultaneously solving these problems is the energy recovery from and reduction of organic wastes. Sewage sludge generated in sewage treatment plants has been treated in various ways since ocean disposal was completely prohibited, but the amount generated has been continuously increasing. Since the sewage sludge contains a large amount of organic materials, it is desirable to recover energy from the sewage sludge and reduce the final discharged waste through anaerobic digestion. However, most of the excess sludge is a mass of microorganisms used in sewage treatment, and in order for the excess sludge to be anaerobically digested, the cell walls of the microorganisms must be destroyed first, but it takes a lot of time to destroy the cell walls, so high rates of biogas production and waste reduction cannot be achieved only by anaerobic digestion. Therefore, the pre-treatment process of solubilizing excess sludge is required, and the thermal solubilization process is verified to be the most efficient among various solubilization methods, and high rates of biogas production and waste reduction can be achieved by anaerobic digestion after destroying cell walls the thermal solubilization process. In this study, when pretreating TS 10% thickened excess sludge through a thermal solubilization system, a study was conducted on solubilization characteristics according to retention time and operating temperature variables. The experimental variables for the retention time of the thermal solubilization system were 30 minutes, 60 minutes, 90 minutes, and 120 minutes, respectively, while the operating temperature was fixed at 160℃. The soulbilization rates calculated through TCOD and SCOD derived from the experimental results increased in the order of 12.11%, 20.52%, 28.62%, and 31.40%, respectively. And the variables according to operating temperature were 120℃, 140℃, 160℃, 180℃, and 200℃, respectively, while the operating retention time was fixed at 60 minutes. And the solubilization rates increased in the order of 7.14%, 14.52%, 20.52%, 40.72%, and 57.85%, respectively. In addition, TS, VS, T-N, T-P, NH₄⁺-N, and VFAs were analyzed to evaluate thermal solubilization characteristics of thickened excess sludge. As a result, in order to obtain 30% or more solubilization rate through thermal solubilization of TS 10% thickened excess sludge, 120 minutes of retention time is required when the operating temperature is fixed to 160℃, and 170℃ or more of operating temperature is needed when the operating time is fixed to 60 minutes.